help out the register pressure reduction heuristics in the case of
nodes with multiple uses. Currently this uses very conservative
heuristics, so it doesn't have a broad impact, but in cases where it
does help it can make a big difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67586 91177308-0d34-0410-b5e6-96231b3b80d8
e.g. allocating for GR32, bh is not used, updating bl spill weight.
bl should get the same spill weight otherwise it will be choosen
as a spill candidate since spilling bh doesn't make ebx available.
This fix PR2866.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67574 91177308-0d34-0410-b5e6-96231b3b80d8
same as a normal i80 {low64, high16} rather
than its own {high64, low16}. A depressing number
of places know about this; I think I got them all.
Bitcode readers and writers convert back to the old
form to avoid breaking compatibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67562 91177308-0d34-0410-b5e6-96231b3b80d8
a data dependency on the load node, so it really needs a
data-dependence edge to the load node, even if the load previously
existed.
And add a few comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67554 91177308-0d34-0410-b5e6-96231b3b80d8
%RAX<def> = ...
%RAX<def> = SUBREG_TO_REG 0, %EAX:3<kill>, 3
The first def is defining RAX, not EAX so the top bits were not zero-extended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67511 91177308-0d34-0410-b5e6-96231b3b80d8
- Make type declarations match the struct/class keyword of the definition.
- Move AddSignalHandler into the namespace where it belongs.
- Correctly call functions from template base.
- Some other small changes.
With this patch, LLVM and Clang should build properly and with far less noise under VS2008.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67347 91177308-0d34-0410-b5e6-96231b3b80d8
and expanding a bit convert (PR3711). In both cases, we extract the
valid part of the widen vector and then do the conversion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67175 91177308-0d34-0410-b5e6-96231b3b80d8
size by the array amount as an i32 value instead of promoting from
i32 to i64 then doing the multiply. Not doing this broke wrap-around
assumptions that the optimizers (validly) made. The ultimate real
fix for this is to introduce i64 version of alloca and remove mallocinst.
This fixes PR3829
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67093 91177308-0d34-0410-b5e6-96231b3b80d8
vector shuffle mask. Forced the mask to be built using i32. Note: this will
be irrelevant once vector_shuffle no longer takes a build vector for the
shuffle mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67076 91177308-0d34-0410-b5e6-96231b3b80d8
U test/CodeGen/X86/2009-03-13-PHIElimBug.ll
D test/CodeGen/X86/2009-03-16-PHIElimInLPad.ll
U lib/CodeGen/PHIElimination.cpp
r67049 was causing this failure:
Running /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/dg.exp ...
FAIL: /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/2009-03-13-PHIElimBug.ll for PR3784
Failed with exit(1) at line 1
while running: llvm-as < /Volumes/Sandbox/Buildbot/llvm/full-llvm/build/llvm.src/test/CodeGen/X86/2009-03-13-PHIElimBug.ll | llc -march=x86 | /usr/bin/grep -A 2 {call f} | /usr/bin/grep movl
child process exited abnormally
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67051 91177308-0d34-0410-b5e6-96231b3b80d8
how invokes are set up. The fix could be disturbed by
register copies coming after the EH_LABEL, and also didn't
behave quite right when it was the invoke result that
was used in a phi node. Also (see new testcase) fix
another phi elimination bug while there: register copies
in the landing pad need to come after the EH_LABEL, because
that's where execution branches to when unwinding. If they
come before the EH_LABEL then they will never be executed...
Also tweak the original testcase so it doesn't use a no-longer
existing counter.
The accumulated phi elimination changes fix two of seven Ada
testsuite failures that turned up after landing pad critical
edge splitting was turned off. So there's probably more to come.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@67049 91177308-0d34-0410-b5e6-96231b3b80d8
if FPConstant is legal because if the FPConstant doesn't need to be stored
in a constant pool, the transformation is unlikely to be profitable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66994 91177308-0d34-0410-b5e6-96231b3b80d8
ptrtoint and inttoptr in X86FastISel. These casts aren't always
handled in the generic FastISel code because X86 sometimes needs
custom code to do truncation and zero-extension.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66988 91177308-0d34-0410-b5e6-96231b3b80d8
by inserting explicit zero extensions where necessary. Included
is a testcase where SelectionDAG produces a virtual register
holding an i1 value which FastISel previously mistakenly assumed
to be zero-extended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66941 91177308-0d34-0410-b5e6-96231b3b80d8
1. ConstantPoolSDNode alignment field is log2 value of the alignment requirement. This is not consistent with other SDNode variants.
2. MachineConstantPool alignment field is also a log2 value.
3. However, some places are creating ConstantPoolSDNode with alignment value rather than log2 values. This creates entries with artificially large alignments, e.g. 256 for SSE vector values.
4. Constant pool entry offsets are computed when they are created. However, asm printer group them by sections. That means the offsets are no longer valid. However, asm printer uses them to determine size of padding between entries.
5. Asm printer uses expensive data structure multimap to track constant pool entries by sections.
6. Asm printer iterate over SmallPtrSet when it's emitting constant pool entries. This is non-deterministic.
Solutions:
1. ConstantPoolSDNode alignment field is changed to keep non-log2 value.
2. MachineConstantPool alignment field is also changed to keep non-log2 value.
3. Functions that create ConstantPool nodes are passing in non-log2 alignments.
4. MachineConstantPoolEntry no longer keeps an offset field. It's replaced with an alignment field. Offsets are not computed when constant pool entries are created. They are computed on the fly in asm printer and JIT.
5. Asm printer uses cheaper data structure to group constant pool entries.
6. Asm printer compute entry offsets after grouping is done.
7. Change JIT code to compute entry offsets on the fly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66875 91177308-0d34-0410-b5e6-96231b3b80d8
related transformations out of target-specific dag combine into the
ARM backend. These were added by Evan in r37685 with no testcases
and only seems to help ARM (e.g. test/CodeGen/ARM/select_xform.ll).
Add some simple X86-specific (for now) DAG combines that turn things
like cond ? 8 : 0 -> (zext(cond) << 3). This happens frequently
with the recently added cp constant select optimization, but is a
very general xform. For example, we now compile the second example
in const-select.ll to:
_test:
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
seta %al
movzbl %al, %eax
movl 4(%esp), %ecx
movsbl (%ecx,%eax,4), %eax
ret
instead of:
_test:
movl 4(%esp), %eax
leal 4(%eax), %ecx
movsd LCPI2_0, %xmm0
ucomisd 8(%esp), %xmm0
cmovbe %eax, %ecx
movsbl (%ecx), %eax
ret
This passes multisource and dejagnu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66779 91177308-0d34-0410-b5e6-96231b3b80d8
alignment of the generated constant pool entry to the
desired alignment of a type. If we don't do this, we end up
trying to do movsd from 4-byte alignment memory. This fixes
450.soplex and 456.hmmer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66641 91177308-0d34-0410-b5e6-96231b3b80d8
