We switch the order of offset and field type to make TBAAStructType node
(name, parent node, offset) similar to scalar TBAA node (name, parent node).
TypeIsImmutable is added to TBAAStructTag node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180654 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than just splitting the input type and hoping for the best, apply
a bit more cleverness. Just splitting the types until the source is
legal often leads to an illegal result time, which is then widened and a
scalarization step is introduced which leads to truly horrible code
generation. With the loop vectorizer, these sorts of operations are much
more common, and so it's worth extra effort to do them well.
Add a legalization hook for the operands of a TRUNCATE node, which will
be encountered after the result type has been legalized, but if the
operand type is still illegal. If simple splitting of both types
ends up with the result type of each half still being legal, just
do that (v16i16 -> v16i8 on ARM, for example). If, however, that would
result in an illegal result type (v8i32 -> v8i8 on ARM, for example),
we can get more clever with power-two vectors. Specifically,
split the input type, but also widen the result element size, then
concatenate the halves and truncate again. For example on ARM,
To perform a "%res = v8i8 trunc v8i32 %in" we transform to:
%inlo = v4i32 extract_subvector %in, 0
%inhi = v4i32 extract_subvector %in, 4
%lo16 = v4i16 trunc v4i32 %inlo
%hi16 = v4i16 trunc v4i32 %inhi
%in16 = v8i16 concat_vectors v4i16 %lo16, v4i16 %hi16
%res = v8i8 trunc v8i16 %in16
This allows instruction selection to generate three VMOVN instructions
instead of a sequences of moves, stores and loads.
Update the ARMTargetTransformInfo to take this improved legalization
into account.
Consider the simplified IR:
define <16 x i8> @test1(<16 x i32>* %ap) {
%a = load <16 x i32>* %ap
%tmp = trunc <16 x i32> %a to <16 x i8>
ret <16 x i8> %tmp
}
define <8 x i8> @test2(<8 x i32>* %ap) {
%a = load <8 x i32>* %ap
%tmp = trunc <8 x i32> %a to <8 x i8>
ret <8 x i8> %tmp
}
Previously, we would generate the truly hideous:
.syntax unified
.section __TEXT,__text,regular,pure_instructions
.globl _test1
.align 2
_test1: @ @test1
@ BB#0:
push {r7}
mov r7, sp
sub sp, sp, #20
bic sp, sp, #7
add r1, r0, #48
add r2, r0, #32
vld1.64 {d24, d25}, [r0:128]
vld1.64 {d16, d17}, [r1:128]
vld1.64 {d18, d19}, [r2:128]
add r1, r0, #16
vmovn.i32 d22, q8
vld1.64 {d16, d17}, [r1:128]
vmovn.i32 d20, q9
vmovn.i32 d18, q12
vmov.u16 r0, d22[3]
strb r0, [sp, #15]
vmov.u16 r0, d22[2]
strb r0, [sp, #14]
vmov.u16 r0, d22[1]
strb r0, [sp, #13]
vmov.u16 r0, d22[0]
vmovn.i32 d16, q8
strb r0, [sp, #12]
vmov.u16 r0, d20[3]
strb r0, [sp, #11]
vmov.u16 r0, d20[2]
strb r0, [sp, #10]
vmov.u16 r0, d20[1]
strb r0, [sp, #9]
vmov.u16 r0, d20[0]
strb r0, [sp, #8]
vmov.u16 r0, d18[3]
strb r0, [sp, #3]
vmov.u16 r0, d18[2]
strb r0, [sp, #2]
vmov.u16 r0, d18[1]
strb r0, [sp, #1]
vmov.u16 r0, d18[0]
strb r0, [sp]
vmov.u16 r0, d16[3]
strb r0, [sp, #7]
vmov.u16 r0, d16[2]
strb r0, [sp, #6]
vmov.u16 r0, d16[1]
strb r0, [sp, #5]
vmov.u16 r0, d16[0]
strb r0, [sp, #4]
vldmia sp, {d16, d17}
vmov r0, r1, d16
vmov r2, r3, d17
mov sp, r7
pop {r7}
bx lr
.globl _test2
.align 2
_test2: @ @test2
@ BB#0:
push {r7}
mov r7, sp
sub sp, sp, #12
bic sp, sp, #7
vld1.64 {d16, d17}, [r0:128]
add r0, r0, #16
vld1.64 {d20, d21}, [r0:128]
vmovn.i32 d18, q8
vmov.u16 r0, d18[3]
vmovn.i32 d16, q10
strb r0, [sp, #3]
vmov.u16 r0, d18[2]
strb r0, [sp, #2]
vmov.u16 r0, d18[1]
strb r0, [sp, #1]
vmov.u16 r0, d18[0]
strb r0, [sp]
vmov.u16 r0, d16[3]
strb r0, [sp, #7]
vmov.u16 r0, d16[2]
strb r0, [sp, #6]
vmov.u16 r0, d16[1]
strb r0, [sp, #5]
vmov.u16 r0, d16[0]
strb r0, [sp, #4]
ldm sp, {r0, r1}
mov sp, r7
pop {r7}
bx lr
Now, however, we generate the much more straightforward:
.syntax unified
.section __TEXT,__text,regular,pure_instructions
.globl _test1
.align 2
_test1: @ @test1
@ BB#0:
add r1, r0, #48
add r2, r0, #32
vld1.64 {d20, d21}, [r0:128]
vld1.64 {d16, d17}, [r1:128]
add r1, r0, #16
vld1.64 {d18, d19}, [r2:128]
vld1.64 {d22, d23}, [r1:128]
vmovn.i32 d17, q8
vmovn.i32 d16, q9
vmovn.i32 d18, q10
vmovn.i32 d19, q11
vmovn.i16 d17, q8
vmovn.i16 d16, q9
vmov r0, r1, d16
vmov r2, r3, d17
bx lr
.globl _test2
.align 2
_test2: @ @test2
@ BB#0:
vld1.64 {d16, d17}, [r0:128]
add r0, r0, #16
vld1.64 {d18, d19}, [r0:128]
vmovn.i32 d16, q8
vmovn.i32 d17, q9
vmovn.i16 d16, q8
vmov r0, r1, d16
bx lr
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179989 91177308-0d34-0410-b5e6-96231b3b80d8
Added PathAliases to check if two struct-path tags can alias.
Added command line option -struct-path-tbaa.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179337 91177308-0d34-0410-b5e6-96231b3b80d8
The costs are overfitted so that I can still use the legalization factor.
For example the following kernel has about half the throughput vectorized than
unvectorized when compiled with SSE2. Before this patch we would vectorize it.
unsigned short A[1024];
double B[1024];
void f() {
int i;
for (i = 0; i < 1024; ++i) {
B[i] = (double) A[i];
}
}
radar://13599001
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179033 91177308-0d34-0410-b5e6-96231b3b80d8
The code in getTypeConversion attempts to promote the element vector type
before it trys to split or widen the vector.
After it failed finding a legal vector type by promoting it would continue using
the promoted vector element type. Thereby missing legal splitted vector types.
For example the type v32i32 that has a legal split of 4 x v3i32 on x86/sse2
would be transformed to: v32i256 and from there on successively split to:
v16i256, v8i256, v1i256 and then finally ends up as an i64 type.
By resetting the vector element type to the original vector element type that
existed before the promotion the code will attempt to split the vector type to
smaller vector widths of the same type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178999 91177308-0d34-0410-b5e6-96231b3b80d8
SSE2 has efficient support for shifts by a scalar. My previous change of making
shifts expensive did not take this into account marking all shifts as expensive.
This would prevent vectorization from happening where it is actually beneficial.
With this change we differentiate between shifts of constants and other shifts.
radar://13576547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178808 91177308-0d34-0410-b5e6-96231b3b80d8
The default logic does not correctly identify costs of casts because they are
marked as custom on x86.
For some cases, where the shift amount is a scalar we would be able to generate
better code. Unfortunately, when this is the case the value (the splat) will get
hoisted out of the loop, thereby making it invisible to ISel.
radar://13130673
radar://13537826
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178703 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR15570: SEGV: SCEV back-edge info invalid after dead code removal.
Indvars creates a SCEV expression for the loop's back edge taken
count, then determines that the comparison is always true and
removes it.
When loop-unroll asks for the expression, it contains a NULL
SCEVUnknkown (as a CallbackVH).
forgetMemoizedResults should invalidate the loop back edges expression.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177986 91177308-0d34-0410-b5e6-96231b3b80d8
Add "evaluate-tbaa" to print alias queries of loads/stores. Alias queries
between pointers do not include TBAA tags.
Add testing case for "placement new". TBAA currently says NoAlias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177772 91177308-0d34-0410-b5e6-96231b3b80d8
- After moving logic recognizing vector shift with scalar amount from
DAG combining into DAG lowering, we declare to customize all vector
shifts even vector shift on AVX is legal. As a result, the cost model
needs special tuning to identify these legal cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177586 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM backend currently has poor codegen for long sext/zext
operations, such as v8i8 -> v8i32. This patch addresses this
by performing a custom expansion in ARMISelLowering. It also
adds/changes the cost of such lowering in ARMTTI.
This partially addresses PR14867.
Patch by Pete Couperus
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177380 91177308-0d34-0410-b5e6-96231b3b80d8
The default logic marks them as too expensive.
For example, before this patch we estimated:
cost of 16 for instruction: %r = uitofp <4 x i16> %v0 to <4 x float>
While this translates to:
vmovl.u16 q8, d16
vcvt.f32.u32 q8, q8
All other costs are left to the values assigned by the fallback logic. Theses
costs are mostly reasonable in the sense that they get progressively more
expensive as the instruction sequences emitted get longer.
radar://13445992
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177334 91177308-0d34-0410-b5e6-96231b3b80d8
Fix cost of some "cheap" cast instructions. Before this patch we used to
estimate for example:
cost of 16 for instruction: %r = fptoui <4 x float> %v0 to <4 x i16>
While we would emit:
vcvt.s32.f32 q8, q8
vmovn.i32 d16, q8
vuzp.8 d16, d17
All other costs are left to the values assigned by the fallback logic. Theses
costs are mostly reasonable in the sense that they get progressively more
expensive as the instruction sequences emitted get longer.
radar://13434072
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177333 91177308-0d34-0410-b5e6-96231b3b80d8
I was too pessimistic in r177105. Vector selects that fit into a legal register
type lower just fine. I was mislead by the code fragment that I was using. The
stores/loads that I saw in those cases came from lowering the conditional off
an address.
Changing the code fragment to:
%T0_3 = type <8 x i18>
%T1_3 = type <8 x i1>
define void @func_blend3(%T0_3* %loadaddr, %T0_3* %loadaddr2,
%T1_3* %blend, %T0_3* %storeaddr) {
%v0 = load %T0_3* %loadaddr
%v1 = load %T0_3* %loadaddr2
==> FROM:
;%c = load %T1_3* %blend
==> TO:
%c = icmp slt %T0_3 %v0, %v1
==> USE:
%r = select %T1_3 %c, %T0_3 %v0, %T0_3 %v1
store %T0_3 %r, %T0_3* %storeaddr
ret void
}
revealed this mistake.
radar://13403975
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177170 91177308-0d34-0410-b5e6-96231b3b80d8
By terrible I mean we store/load from the stack.
This matters on PAQp8 in _Z5trainPsS_ii (which is inlined into Mixer::update)
where we decide to vectorize a loop with a VF of 8 resulting in a 25%
degradation on a cortex-a8.
LV: Found an estimated cost of 2 for VF 8 For instruction: icmp slt i32
LV: Found an estimated cost of 2 for VF 8 For instruction: select i1, i32, i32
The bug that tracks the CodeGen part is PR14868.
radar://13403975
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177105 91177308-0d34-0410-b5e6-96231b3b80d8
Increase the cost of v8/v16-i8 to v8/v16-i32 casts and truncates as the backend
currently lowers those using stack accesses.
This was responsible for a significant degradation on
MultiSource/Benchmarks/Trimaran/enc-pc1/enc-pc1
where we vectorize one loop to a vector factor of 16. After this patch we select
a vector factor of 4 which will generate reasonable code.
unsigned char cle[32];
void test(short c) {
unsigned short compte;
for (compte = 0; compte <= 31; compte++) {
cle[compte] = cle[compte] ^ c;
}
}
radar://13220512
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176898 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176733 91177308-0d34-0410-b5e6-96231b3b80d8
The "invariant.load" metadata indicates the memory unit being accessed is immutable.
A load annotated with this metadata can be moved across any store.
As I am not sure if it is legal to move such loads across barrier/fence, this
change dose not allow such transformation.
rdar://11311484
Thank Arnold for code review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176562 91177308-0d34-0410-b5e6-96231b3b80d8
This matters for example in following matrix multiply:
int **mmult(int rows, int cols, int **m1, int **m2, int **m3) {
int i, j, k, val;
for (i=0; i<rows; i++) {
for (j=0; j<cols; j++) {
val = 0;
for (k=0; k<cols; k++) {
val += m1[i][k] * m2[k][j];
}
m3[i][j] = val;
}
}
return(m3);
}
Taken from the test-suite benchmark Shootout.
We estimate the cost of the multiply to be 2 while we generate 9 instructions
for it and end up being quite a bit slower than the scalar version (48% on my
machine).
Also, properly differentiate between avx1 and avx2. On avx-1 we still split the
vector into 2 128bits and handle the subvector muls like above with 9
instructions.
Only on avx-2 will we have a cost of 9 for v4i64.
I changed the test case in test/Transforms/LoopVectorize/X86/avx1.ll to use an
add instead of a mul because with a mul we now no longer vectorize. I did
verify that the mul would be indeed more expensive when vectorized with 3
kernels:
for (i ...)
r += a[i] * 3;
for (i ...)
m1[i] = m1[i] * 3; // This matches the test case in avx1.ll
and a matrix multiply.
In each case the vectorized version was considerably slower.
radar://13304919
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176403 91177308-0d34-0410-b5e6-96231b3b80d8
We make the cost for calling libm functions extremely high as emitting the
calls is expensive and causes spills (on x86) so performance suffers. We still
vectorize important calls like ceilf and friends on SSE4.1. and fabs.
Differential Revision: http://llvm-reviews.chandlerc.com/D466
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176287 91177308-0d34-0410-b5e6-96231b3b80d8
Listing all of the attributes for the callee of a call/invoke instruction is way
too much and makes the IR unreadable. Use references to attributes instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175877 91177308-0d34-0410-b5e6-96231b3b80d8
sext <4 x i1> to <4 x i64>
sext <4 x i8> to <4 x i64>
sext <4 x i16> to <4 x i64>
I'm running Combine on SIGN_EXTEND_IN_REG and revert SEXT patterns:
(sext_in_reg (v4i64 anyext (v4i32 x )), ExtraVT) -> (v4i64 sext (v4i32 sext_in_reg (v4i32 x , ExtraVT)))
The sext_in_reg (v4i32 x) may be lowered to shl+sar operations.
The "sar" does not exist on 64-bit operation, so lowering sext_in_reg (v4i64 x) has no vector solution.
I also added a cost of this operations to the AVX costs table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175619 91177308-0d34-0410-b5e6-96231b3b80d8
Profiling tests *do* need a JIT. They'll pass if a cross-compiler targetting
AArch64 by default has been built, but fail if a native AArch64 compiler has
been build. Therefore XFAIL is inappropriate and we mark them unsupported.
ExecutionEngine tests are JIT by definition, they should also be unsupported.
Transforms/LICM only uses the interpreter to check the output is still sane
after optimisation. It can be switched to use an interpreter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175433 91177308-0d34-0410-b5e6-96231b3b80d8
Thanks to help from Nadav and Hal, I have a more reasonable (and even
correct!) approach. This specifically penalizes the insertelement
and extractelement operations for the performance hit that will occur
on PowerPC processors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174725 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174713 91177308-0d34-0410-b5e6-96231b3b80d8
Swift has a renaming dependency if we load into D subregisters. We don't have a
way of distinguishing between insertelement operations of values from loads and
other values. Therefore, we are pessimistic for now (The performance problem
showed up in example 14 of gcc-loops).
radar://13096933
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174300 91177308-0d34-0410-b5e6-96231b3b80d8
This provides a place to add customized operation cost information and
control some other target-specific IR-level transformations.
The only non-trivial logic in this checkin assigns a higher cost to
unaligned loads and stores (covered by the included test case).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173520 91177308-0d34-0410-b5e6-96231b3b80d8
This test did not test anything at all (except for opt crashing, but that was
not the reason why it was added).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171248 91177308-0d34-0410-b5e6-96231b3b80d8