This will allow inlining get_magic, which should in turn fix one of the mingw
build problems after the switch to std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210712 91177308-0d34-0410-b5e6-96231b3b80d8
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210687 91177308-0d34-0410-b5e6-96231b3b80d8
Some c++ libraries (libstdc++ at least) don't seem to map to the generic
category in in the system_category's default_error_condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210635 91177308-0d34-0410-b5e6-96231b3b80d8
MSVC doesn't seem to provide any is_error_code_enum enumeration for the
windows errors.
Fortunately very few places in llvm have to handle raw windows errors, so
we can just construct the corresponding error_code directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210631 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes the functions llvm_start_multithreaded() and
llvm_stop_multithreaded(), and changes llvm_is_multithreaded()
to return a constant value based on the value of the compile-time
definition LLVM_ENABLE_THREADS.
Previously, it was possible to have compile-time support for
threads on, and runtime support for threads off, in which case
certain mutexes were not allocated or ever acquired. Now, if the
build is created with threads enabled, mutexes are always acquired.
A test before/after patch of compiling a very large TU showed no
noticeable performance impact of this change.
Reviewers: rnk
Differential Revision: http://reviews.llvm.org/D4076
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210600 91177308-0d34-0410-b5e6-96231b3b80d8
Because we don't have a separate negate( ) function, 0 - NaN does double-duty as the IEEE-754 negate( ) operation, which (unlike most FP ops) *does* attach semantic meaning to the signbit of NaN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210428 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid changing behaviour for everyone who's used to the traditional ghostview
UI, especially since it knows how to stay in the foreground unlike xdg-open.
Amendment to r210147.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210148 91177308-0d34-0410-b5e6-96231b3b80d8
This runs a suitable viewer on Unix desktop environments specified by
Freedesktop.org (GNOME, KDE, Linux distributions etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210147 91177308-0d34-0410-b5e6-96231b3b80d8
Amend r210001 to use the classic fallback order behaviour if the requested
graphing program isn't found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210003 91177308-0d34-0410-b5e6-96231b3b80d8
Replace the crufty build-time configure checks for program paths with
equivalent runtime logic.
This lets users install graphing tools as needed without having to reconfigure
and rebuild LLVM, while eliminating a long chain of inappropriate compile
dependencies that included GUI programs and the windowing system.
Additional features:
* Support the OS X 'open' command to view graphs generated by any of the
Graphviz utilities. This is an alternative to the Graphviz OS X UI which is
no longer available on Mountain Lion.
* Produce informative log output upon failure to indicate which programs can
be installed to view graphs.
Ping me if this doesn't work for your particular environment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210001 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce the support structures necessary to deal with the Windows ARM EH data.
These definitions are extremely aggressive about assertions to aid future use
for generation of the entries and subsequent decoding.
The names for the various fields are meant to reflect the names used by the
Visual Studio toolchain to aid communication.
Due to the complexity in reading a few of the values, there are a couple of
additional utility functions to decode the information.
In general, there are two ways to encode the unwinding information:
- packed, which places the data inline into the
_IMAGE_ARM_RUNTIME_FUNCTION_ENTRY structure.
- unpacked, which places the data into auxiliary structures placed into the
.xdata section.
The set of structures allow reading of data in either encoding, with the minor
caveat that epilogue scopes need to be decoded manually by constructing the
structure from the data returned by the RuntimeFunction structure.
These definitions are meant for read-only access at the current point as the
first use of them will be to decode the exception information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209998 91177308-0d34-0410-b5e6-96231b3b80d8
Input YAML file might contain multiple object file definitions.
New option `-docnum` allows to specify an ordinal number (starting from 1)
of definition used for an object file generation.
Patch reviewed by Sean Silva.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209967 91177308-0d34-0410-b5e6-96231b3b80d8
There is no std::error_code::success, so this removes much of the noise
in transitioning to std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209952 91177308-0d34-0410-b5e6-96231b3b80d8
Fix error handling introduced in r127426 that could result in MemoryBuffers not
having null termination.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208396 91177308-0d34-0410-b5e6-96231b3b80d8
On x64, windows.h doesn't include intrin.h for intrinsics. It just
declares them in the global namespace and uses them, expecting the
compiler to lower it as a builtin. We basically need to do this in
clang, eventually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208023 91177308-0d34-0410-b5e6-96231b3b80d8
Tested that the right -target-cpu is set in the clang -cc1 command line
when running "clang -march=native -E -v - </dev/null" on both an FX-8150
and an FX-8350. Both are family 15h; the FX-8150 (Bulldozer processor)
reports a model number of 1, and the FX-8350 (Piledriver processor)
reports a model number of 2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207973 91177308-0d34-0410-b5e6-96231b3b80d8
Change `BlockFrequency` to defer to `BranchProbability::scale()` and
`BranchProbability::scaleByInverse()`.
This removes `BlockFrequency::scale()` from its API (and drops the
ability to see the remainder), but the only user was the unit tests. If
some code in the future needs an API that exposes the remainder, we can
add something to `BranchProbability`, but I find that unlikely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207550 91177308-0d34-0410-b5e6-96231b3b80d8
Add API to `BranchProbability` for scaling big integers. Next job is to
rip the logic out of `BlockMass` and `BlockFrequency`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207544 91177308-0d34-0410-b5e6-96231b3b80d8
