There is no need to look into the location expressions to transfer them,
the only modification to apply is to patch their base address to reflect
the linked function address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232267 91177308-0d34-0410-b5e6-96231b3b80d8
This actually shares most of its implementation with the generation
of the debug_ranges (the absence of 'a' is not a typo) contribution
for the unit's DW_AT_ranges attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232246 91177308-0d34-0410-b5e6-96231b3b80d8
Nothing fancy, just a straightforward offset to apply to the original
debug_ranges entries to get them in line with the linked addresses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232232 91177308-0d34-0410-b5e6-96231b3b80d8
We recorded the forward references in the CU that holds the referenced
DIE, but this is wrong as those will get resoled *after* the CU that
holds the reference. Record the references in their originating CU along
with a pointer to the remote CU to be able to compute the fixed up
offset at the right time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232193 91177308-0d34-0410-b5e6-96231b3b80d8
They need to be handled specifically as they could vary pretty
widely depending on how the linker moves functions around.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232192 91177308-0d34-0410-b5e6-96231b3b80d8
The typo got unnoticed because we were testing only on Dwarf 2. Add a
Dwarf4 test that exercises the code path, and also tests some newer
FORMs that the other test doesn't cover.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232191 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to gep (r230786) and load (r230794) changes.
Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.
(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)
import fileinput
import sys
import re
rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)
def conv(match):
line = match.group(1)
line += match.group(4)
line += ", "
line += match.group(2)
return line
line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
sys.stdout.write(line[off:match.start()])
sys.stdout.write(conv(match))
off = match.end()
sys.stdout.write(line[off:])
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232184 91177308-0d34-0410-b5e6-96231b3b80d8
using numeric values and not their symbolic constant names.
The routines that print Mach-O stuff already had a verbose parameter and this
change is just changing the passing true to passing !NonVerbose. With just a
couple of fixes and a bunch of test case updates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232182 91177308-0d34-0410-b5e6-96231b3b80d8
DW_AT_low_pc on functions is taken care of by the relocation processing, but
DW_AT_high_pc and DW_AT_low_pc on other lexical scopes need special handling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231955 91177308-0d34-0410-b5e6-96231b3b80d8
As of r231908, the test I added in r231902 actually gets run - but I'd
checked in a stale version of the input so it didn't pass. Fix the
input and un-xfail the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231911 91177308-0d34-0410-b5e6-96231b3b80d8
There were also errors in the CHECK line which I fixed and the test
doesn't actually pass as the "100" is in the wrong line. Not sure
whether this is a test failure or a coverage failure so making the test
XFAIL for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231908 91177308-0d34-0410-b5e6-96231b3b80d8
Doing this gets function's low_pc and global variable's locations right
in the output debug info. It also could get right other attributes
that need to be relocated (in linker terms), but I don't know of any
other than the address attributes.
This doesn't fixup low_pc attributes in compile_unit, lexical_block
or inlined subroutine, nor does it get right high_pc attributes
for function. This will come in a subsequent commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231544 91177308-0d34-0410-b5e6-96231b3b80d8
Reference attributes are mainly handled by just creating DIEEntry
attributes for them. There is a special case for DW_FORM_ref_addr
attributes though, because the DIEEntry code needs a DwarfDebug
code to emit them (and we don't have one as we do no CodeGen).
In that case, just use DIEInteger attributes with the right form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231531 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds code to emit DIE trees that have been pruned from the
parts that haven't been marked as kept in the previous pass.
It works by 'cloning' the input DIE tree (as read by libDebugInfoDwarf)
into a tree of DIE objects. Cloning the DIEs means essentially cloning
their attributes. The code in this commit does only handle scalar and
block attributes (scalar because they are trivial, blocks because they
can't be easily replaced by a scalr placeholder), all the other ones
are replaced by placeholder zero values and will be handled in
further commits.
The added tests mostly check that the DIE tree has the correct layout and
also verify that a few chosen scalar and block attributes correctly make
their way into the output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231300 91177308-0d34-0410-b5e6-96231b3b80d8
The issue was that we were always printing the remarks. Fix that and add a test
showing that it prints nothing if -pass-remarks is not given.
Original message:
Correctly handle -pass-remarks in the gold plugin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231273 91177308-0d34-0410-b5e6-96231b3b80d8
This will now display enum definitions both at the global
scope as well as nested inside of classes. Additionally,
it will no longer display enums at the global scope if the
enum is nested. Instead, it will omit the definition of
the enum globally and instead emit it in the corresponding
class definition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231215 91177308-0d34-0410-b5e6-96231b3b80d8
The internal shell was already threading around a 'cwd' parameter. We
just have to make it mutable so that we can update it as the test script
executes.
If the shell ever grows support for environment variable substitution,
we could also implement support for export.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231017 91177308-0d34-0410-b5e6-96231b3b80d8
The issue is that now we have a diag handler during optimizations
and get forward every optimization remark, flooding stdout.
The same filtering should probably be done with or without a
custom handler, but for now just ignore remarks.
Original message:
gold-plugin: "Upgrade" debug info and handle its warnings.
The gold plugin never calls MaterializeModule, so any old debug info
was not deleted and could cause crashes.
Now that it is being "upgraded", the plugin also has to handle warnings
and create Modules with a nice id (it shows in the warning).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230991 91177308-0d34-0410-b5e6-96231b3b80d8
A short list of some of the improvements:
1) Now supports -all command line argument, which implies many
other command line arguments to simplify usage.
2) Now supports -no-compiler-generated command line argument to
exclude compiler generated types.
3) Prints base class list.
4) -class-definitions implies -types.
5) Proper display of bitfields.
6) Can now distinguish between struct/class/interface/union.
And a few other minor tweaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230933 91177308-0d34-0410-b5e6-96231b3b80d8
It emits *millions of warnings* during selfhosting LTO build, to choke the buildbot with gigbytes of log.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230885 91177308-0d34-0410-b5e6-96231b3b80d8
This class is responsible for getting the linked data to the
disk in the appropriate form. Today it it an empty shell that
just instantiates an MC layer.
As we do not put anything in the resulting file yet, we just
check it has the right architecture (and check that -o does
the right thing).
To be able to create all the components, this commit adds a
few dependencies to llvm-dsymutil, namely all-targets, MC and
AsmPrinter.
Also add a -no-output option, so that tests that do not need
the binary result can continue to run even if they do not have
the required target linked in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230824 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
The gold plugin never calls MaterializeModule, so any old debug info
was not deleted and could cause crashes.
Now that it is being "upgraded", the plugin also has to handle warnings
and create Modules with a nice id (it shows in the warning).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230655 91177308-0d34-0410-b5e6-96231b3b80d8
When multiple regions start on the same line, llvm-cov was just
showing the count of the last one as the line count. This can be
confusing and misleading for things like one-liner loops, where the
count at the end isn't very interesting, or even "if" statements with
an opening brace at the end of the line.
Instead, use the maximum of all of the region start counts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230263 91177308-0d34-0410-b5e6-96231b3b80d8
with the Mach-O S_LITERAL_POINTERS section type.
Also fix the printing of the leading addresses for literal sections to be consistent and
not print the 0x prefix. Updated test cases to match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229548 91177308-0d34-0410-b5e6-96231b3b80d8
GNU ld sets default, not hidden, visibility on local symbols.
Having default or hidden visibility on local symbols makes no difference in run-time behavior.
Patch by: H.J. Lu <hjl.tools@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229297 91177308-0d34-0410-b5e6-96231b3b80d8
a gold binary explicitly. Substitute this binary into the tests rather
than just directly executing the 'ld' binary.
This should allow folks to inject a cross compiling gold binary, or in
my case to use a gold binary built and installed somewhere other than
/usr/bin/ld. It should also allow the tests to find 'ld.gold' so that
things work even if gold isn't the default on the system.
I've only stubbed out support in the makefile to preserve the existing
behavior with none of the fancy logic. If someone else wants to add
logic here, they're welcome to do so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229251 91177308-0d34-0410-b5e6-96231b3b80d8
This code didn't really make sense as is. If a filename is passed in,
the user obviously wants the coverage *for that file*, not *for
everything*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229217 91177308-0d34-0410-b5e6-96231b3b80d8
With this commit, llvm-dsymutil learns how to choose which DIEs
it will link in the final output and which ones it won't. This
is based on the 'valid relocation' information that has been
built in the previous commits.
The test only tests that we choose the right 'root DIEs'. The
selection algorithm (and especially the part that walk the
dependencies of a root DIE) lacks a bit test coverage. This
will be much easier to cover when we output actual Dwarf and
thus can use llvm-dwarfdump to verify the structure of the
emitted DIE trees. I'll add more tests then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229183 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Move calls to get_input_file and release_input_file out of
getModuleForFile(). Otherwise release_input_file may end up
unmapping a view of the file while the view is still being
used by the Module (on 32-bit hosts).
Fix for PR22482.
Test Plan: Add test using --no-map-whole-files.
Reviewers: rafael, nlewycky
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7539
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228842 91177308-0d34-0410-b5e6-96231b3b80d8
Add a trivial binary (int main() { return 0; }) built for Windows on ARM to
ensure that we can correctly identify ARM_MOV32(T) base relocations. Addresses
post-commit review comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227673 91177308-0d34-0410-b5e6-96231b3b80d8
segname,sectname to specify a Mach-O section to print. The printing is based on
the section type or section attributes.
The printing of the module initialization and termination section types is printed
with this change. Printing of other section types will be added next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227649 91177308-0d34-0410-b5e6-96231b3b80d8
