Commit Graph

149 Commits

Author SHA1 Message Date
Dan Gohman
132a9946bf Fix llvm-ld to clean up its output files in case of an error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99915 91177308-0d34-0410-b5e6-96231b3b80d8
2010-03-30 19:56:41 +00:00
Chris Lattner
46475cb08e revert r99719 which is breaking the botz.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99721 91177308-0d34-0410-b5e6-96231b3b80d8
2010-03-27 18:01:10 +00:00
Dan Gohman
00ad278500 Make llvm-ld remove its output files in the event of an error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99719 91177308-0d34-0410-b5e6-96231b3b80d8
2010-03-27 16:49:51 +00:00
Dan Gohman
92f5fccb4d No need to check the same condition twice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99716 91177308-0d34-0410-b5e6-96231b3b80d8
2010-03-27 16:36:08 +00:00
Dan Gohman
51ecc389a9 Trim #includes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99416 91177308-0d34-0410-b5e6-96231b3b80d8
2010-03-24 19:56:17 +00:00
Dan Gohman
34b96f4fb3 It's not necessary to call raw_ostream::close explicitly on automatic
raw_ostream variables immediately before they go out of scope.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99413 91177308-0d34-0410-b5e6-96231b3b80d8
2010-03-24 19:00:02 +00:00
Chris Lattner
25c54c09ef make sure to delete the llvm module before calling llvm_shutdown,
this fixes crashes in error cases, PR6683


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99334 91177308-0d34-0410-b5e6-96231b3b80d8
2010-03-23 21:59:43 +00:00
Benjamin Kramer
12ea66a727 Replace strcpy with memcpy when we have the length around anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94746 91177308-0d34-0410-b5e6-96231b3b80d8
2010-01-28 18:04:38 +00:00
Chris Lattner
43b5f9312d make -fno-rtti the default unless a directory builds with REQUIRES_RTTI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94378 91177308-0d34-0410-b5e6-96231b3b80d8
2010-01-24 20:43:08 +00:00
Chris Lattner
e73a31f667 Stop building RTTI information for *most* llvm libraries. Notable
missing ones are libsupport, libsystem and libvmcore.  libvmcore is
currently blocked on bugpoint, which uses EH.  Once it stops using
EH, we can switch it off.

This #if 0's out 3 unit tests, because gtest requires RTTI information.
Suggestions welcome on how to fix this.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94164 91177308-0d34-0410-b5e6-96231b3b80d8
2010-01-22 06:49:46 +00:00
Chris Lattner
316e3268a8 llvm-ld doesn't throw.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84819 91177308-0d34-0410-b5e6-96231b3b80d8
2009-10-22 00:52:28 +00:00
Dan Gohman
baa26395cc Make LLVM command-line tools overwrite their output files without -f.
This is conventional command-line tool behavior. -f now just means
"enable binary output on terminals".

Add a -f option to llvm-extract and llvm-link, for consistency.

Remove F_Force from raw_fd_ostream and enable overwriting and
truncating by default. Introduce an F_Excl flag to permit users to
enable a failure when the file already exists. This flag is
currently unused.

Update Makefiles and documentation accordingly.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79990 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-25 15:34:52 +00:00
Chris Lattner
74382b7c69 Prune #includes from llvm/Linker.h and llvm/System/Path.h,
forcing them down into various .cpp files.

This change also:
1. Renames TimeValue::toString() and Path::toString() to ::str()
   for similarity with the STL.
2. Removes all stream insertion support for sys::Path, forcing
   clients to call .str().
3. Removes a use of Config/alloca.h from bugpoint, using smallvector
   instead.
4. Weans llvm-db off <iostream>

sys::Path really needs to be gutted, but I don't have the desire to
do it at this point.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79869 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-23 22:45:37 +00:00
Chris Lattner
17e9edc4a7 Change raw_fd_ostream to take flags as an optional bitmask
instead of as two bools.  Use this to add a F_Append flag
which has the obvious behavior.

Other unrelated changes conflated into this patch:

1. REmove EH stuff from llvm-dis and llvm-as, the try blocks
   are dead.
2. Simplify the filename inference code in llvm-as/llvm-dis,
   because raw_fd_ostream does the right thing with '-'.
3. Switch machine verifier to use raw_ostream instead of ostream
   (Which is the thing that needed append in the first place).




git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@79807 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-23 02:51:22 +00:00
Dan Gohman
8608cf23da Use (void *)(intptr_t) to cast function addresses to void*
for use with sys::Path::GetMainExecutable, to avoid warnings
with -pedantic.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78245 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-05 21:03:39 +00:00
Dan Gohman
197f728d49 Fix FindExecutable to use sys::Path::GetMainExecutable instead of
just argv[0]. And remove the code for searching the current
working directory and for searching PATH; the point of FindExecutable
is not to find whatever version of the executable can be found by
searching around, but to find an executable that accompanies the
current executable.

Update the tools to use sys::Program::FindProgramByName when they
want PATH searching.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78240 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-05 20:21:17 +00:00
Sanjiv Gupta
d7de7bc297 Added -b option to override the default bitcode output file name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76768 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-22 18:41:45 +00:00
Dan Gohman
ac95cc79ac Convert more tools code from cerr and cout to errs() and outs().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76070 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-16 15:30:09 +00:00
Daniel Dunbar
ff9834ab9d Kill off last uses of TargetMachineRegistry class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75892 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-16 02:41:19 +00:00
Owen Anderson
0d7c695c74 To simplify the upcoming context-on-type change, switch all command line tools to using the default global context for now.
This will let us to hardwire stuff to the global context in the short term while the API is sorted out.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75846 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-15 22:16:10 +00:00
Dan Gohman
65f57c233c Use errs() instead of std::cerr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75791 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-15 16:35:29 +00:00
Owen Anderson
31895e7359 Hold the LLVMContext by reference rather than by pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74640 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-01 21:22:36 +00:00
Owen Anderson
8b477ed579 Add a pointer to the owning LLVMContext to Module. This requires threading LLVMContext through a lot
of the bitcode reader and ASM parser APIs, as well as supporting it in all of the tools.

Patches for Clang and LLVM-GCC to follow.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74614 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-01 16:58:40 +00:00
Daniel Dunbar
e0f0e0be1c Change LTO to run the global opt pass twice.
- This matches llvm-ld.

It took a bit of archeology to figure out what the right thing to do was
(whether this was intentionally added or intentionally removed). My final
conclusion is that Chris added this intentionally here:
  http://llvm.org/viewvc/llvm-project?view=rev&revision=16913
but the changes weren't propogated to llvm-ld until here:
  http://llvm.org/viewvc/llvm-project?view=rev&revision=34058
which was after lto.cpp had been cloned off (of llvm-ld), here:
  http://llvm.org/viewvc/llvm-project?view=rev&revision=29494

From the commit message, it looks like the motivation for running global opt
again is because we ran it prior to inlining. Based on that I updated the
comment and also only run the pass if we actually ran the inliner.

Chris, please review.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72811 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-03 21:51:32 +00:00
Daniel Dunbar
006a034828 Add createStandardLTOPasses to StandardPasses.h, and move lto and llvm-ld over.
- I know it sounds crazy, but I think all the pass lists are now coalesced into
   StandardPasses.h.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72805 91177308-0d34-0410-b5e6-96231b3b80d8
2009-06-03 21:06:14 +00:00
Chris Lattner
cc14d25dd9 Change various llvm utilities to use PrettyStackTraceProgram in
their main routines.  This makes the tools print their argc/argv
commands if they crash.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@66248 91177308-0d34-0410-b5e6-96231b3b80d8
2009-03-06 05:34:10 +00:00
Nick Lewycky
677c2c2a62 Add the function attributes pass during LTO time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65508 91177308-0d34-0410-b5e6-96231b3b80d8
2009-02-26 06:56:16 +00:00
Chris Lattner
5d5a897529 make llvm-ld smart enough to link against native libraries that are
not in system library directories by checking -L paths as well.
Patch by Axel Naumann!


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@61730 91177308-0d34-0410-b5e6-96231b3b80d8
2009-01-05 19:01:32 +00:00
Andrew Lenharth
0c6ba44890 ignore the -m elf_i386 directive used in the linux kernel
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@59642 91177308-0d34-0410-b5e6-96231b3b80d8
2008-11-19 17:00:08 +00:00
Oscar Fuentes
3d01fc7de8 Initial support for the CMake build system.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56419 91177308-0d34-0410-b5e6-96231b3b80d8
2008-09-22 01:08:49 +00:00
Owen Anderson
3688f268cb Remove GCSE, ValueNumbering, and LoadValueNumbering. These have been deprecated for almost a year; it's finally time for them to go away.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54822 91177308-0d34-0410-b5e6-96231b3b80d8
2008-08-15 21:31:02 +00:00
Owen Anderson
735e6eabf1 Use ADCE instead of just DCE. ADCE will better clean up after jump threading,
for instance.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53045 91177308-0d34-0410-b5e6-96231b3b80d8
2008-07-02 18:42:07 +00:00
Argyrios Kyrtzidis
ca29dffa16 Since we are using GCC to assemble the program, make sure the assembly syntax is AT&T.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52827 91177308-0d34-0410-b5e6-96231b3b80d8
2008-06-27 15:08:59 +00:00
Chris Lattner
6c31e87d7c run mem2reg after the second jump threading pass in llvm-ld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52728 91177308-0d34-0410-b5e6-96231b3b80d8
2008-06-25 16:51:55 +00:00
Chris Lattner
8e336eb04d remove some dead options.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52726 91177308-0d34-0410-b5e6-96231b3b80d8
2008-06-25 16:44:08 +00:00
Argyrios Kyrtzidis
48cca1fd46 Add an "exe" suffix only if the output file has no suffix at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52289 91177308-0d34-0410-b5e6-96231b3b80d8
2008-06-15 15:20:16 +00:00
Argyrios Kyrtzidis
1662183a83 Make sure all produced executable files have "exe" suffix on Windows.
With this more general way, -native and -native-cbe options are handled too.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52287 91177308-0d34-0410-b5e6-96231b3b80d8
2008-06-15 13:48:12 +00:00
Argyrios Kyrtzidis
5b90a7296c Append "exe" suffix to executable files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52285 91177308-0d34-0410-b5e6-96231b3b80d8
2008-06-15 12:01:16 +00:00
Owen Anderson
d2368dc344 Move MemCpyOpt after GVN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50097 91177308-0d34-0410-b5e6-96231b3b80d8
2008-04-22 07:12:26 +00:00
Chris Lattner
e12d8e422d run the jump threading pass in llvm-ld also
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50027 91177308-0d34-0410-b5e6-96231b3b80d8
2008-04-21 04:28:40 +00:00
Owen Anderson
a723d1e48f Factor a bunch of functionality related to memcpy and memset transforms out of
GVN and into its own pass.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49419 91177308-0d34-0410-b5e6-96231b3b80d8
2008-04-09 08:23:16 +00:00
Andrew Lenharth
230293b4c5 style and spelling
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48562 91177308-0d34-0410-b5e6-96231b3b80d8
2008-03-19 22:32:43 +00:00
Andrew Lenharth
50b5742157 llvm-ld deserves disable-verify too. opt shouldn't have all the fun options.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48550 91177308-0d34-0410-b5e6-96231b3b80d8
2008-03-19 20:49:51 +00:00
Anton Korobeynikov
ae9f3a3b7c Unbreak build with gcc 4.3: provide missed includes and silence most annoying warnings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47367 91177308-0d34-0410-b5e6-96231b3b80d8
2008-02-20 11:08:44 +00:00
Chris Lattner
3992f5231a Add support for frameworks. Patch by Shantonu Sen!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46421 91177308-0d34-0410-b5e6-96231b3b80d8
2008-01-27 22:58:59 +00:00
Chris Lattner
03a1c7ae3d Fix llvm-ld -Xlinker, patch by Daniel Teske!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45770 91177308-0d34-0410-b5e6-96231b3b80d8
2008-01-09 01:01:17 +00:00
Chris Lattner
21c62da287 remove attributions from tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45421 91177308-0d34-0410-b5e6-96231b3b80d8
2007-12-29 20:44:31 +00:00
Chris Lattner
5116784826 remove attributions from tools/utils makefiles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45414 91177308-0d34-0410-b5e6-96231b3b80d8
2007-12-29 20:07:17 +00:00
Dan Gohman
82a13c9c48 Move the space in overview output for commands out of each of the
commands and into the common code.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@42752 91177308-0d34-0410-b5e6-96231b3b80d8
2007-10-08 15:45:12 +00:00
Owen Anderson
d06eb2c879 Turn GVN on by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41787 91177308-0d34-0410-b5e6-96231b3b80d8
2007-09-08 22:23:52 +00:00