Make llvm-cov compatible with gcov for cases where multiple files are
specified on the command line. That is, loop over each one and report
coverage, and report errors on stderr only rather than via return
code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211959 91177308-0d34-0410-b5e6-96231b3b80d8
While std::error_code itself seems to work OK in all platforms, there
are few annoying differences with regards to the std::errc enumeration.
This patch adds a simple llvm enumeration, which will hopefully avoid build
breakages in other platforms and surprises as we get more uses of
std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210920 91177308-0d34-0410-b5e6-96231b3b80d8
This is a minimal change to remove the header. I will remove the occurrences
of "using std::error_code" in a followup patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210803 91177308-0d34-0410-b5e6-96231b3b80d8
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210687 91177308-0d34-0410-b5e6-96231b3b80d8
In gcov, there's a -n/--no-output option, which disables the writing
of any .gcov files, so that it emits only the summary info on stdout.
This implements the same behaviour in llvm-cov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208148 91177308-0d34-0410-b5e6-96231b3b80d8
GCOV provides an option to prepend output file names with the source
file name, to disambiguate between covered data that's included from
multiple sources. Add a flag to llvm-cov that does the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207035 91177308-0d34-0410-b5e6-96231b3b80d8
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203083 91177308-0d34-0410-b5e6-96231b3b80d8
In gcov, the -o flag can accept either a directory or a file name.
When given a directory, the gcda and gcno files are expected to be in
that directory. When given a file, the gcda and gcno files are
expected to be named based on the stem of that file. Non-existent
paths are treated as files.
This implements compatible behaviour.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201555 91177308-0d34-0410-b5e6-96231b3b80d8
Until now, when a path in a gcno file included a directory, we would
emit our .gcov file in that directory, whereas gcov always emits the
file in the current directory. In doing so, this implements gcov's
strange name-mangling -p flag, which is needed to avoid clobbering
files when two with the same name exist in different directories.
The path mangling is a bit ugly and only handles unix-like paths, but
it's simple, and it doesn't make any guesses as to how it should
behave outside of what gcov documents. If we decide this should be
cross platform later, we can consider the compatibility implications
then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200754 91177308-0d34-0410-b5e6-96231b3b80d8
When gcov is run without gcda data, it acts as if the counts are all
zero and labels the file as - to indicate that there was no data. We
should do the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200740 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit imperfect, as these options don't show up in the help as
is and single dash variants are accepted, which differs from gcov.
Unfortunately, this seems to be as good as it gets with the cl::opt
machinery, so it'll do as an incremental step.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200419 91177308-0d34-0410-b5e6-96231b3b80d8
This Properly capitalizes and clarifies the help output from
llvm-cov. It also puts the llvm-only / non-gcov-compatible options in
their own category.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200418 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, llvm-cov isn't command-line compatible with gcov, which
accepts a source file name as its first parameter and infers the gcno
and gcda file names from that. This change keeps our -gcda and -gcno
options available for convenience in overriding this behaviour, but
adds the required parameter and inference behaviour as a compatible
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200417 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to the file summaries, the function summaries output line,
branching and call statistics. The file summaries have been moved
outside the initial loop so that all of the function summaries can be
outputted before file summaries.
Also updated test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197633 91177308-0d34-0410-b5e6-96231b3b80d8
This will cause llvm-cov to output branch counts instead of branch
probabilities. -b must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197594 91177308-0d34-0410-b5e6-96231b3b80d8
Outputs branch information for unconditional branches in addition to
conditional branches. -b option must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197432 91177308-0d34-0410-b5e6-96231b3b80d8
This option tells llvm-cov to print out branch probabilities when
a basic block contains multiple branches. It also prints out some
function summary info including the number of times the function enters,
the percent of time it returns, and how many blocks were executed.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197198 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to gcov, llvm-cov will now print out the block count at the end
of each block. Multiple blocks can end on the same line.
One computational difference is by using -a, llvm-cov will no longer
simply add the block counts together to form a line count. Instead, it
will take the maximum of the block counts on that line. This has a
similar effect to what gcov does, but generates more correct counts in
certain scenarios.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196856 91177308-0d34-0410-b5e6-96231b3b80d8
This splits the file-scope read() function into readGCNO() and
readGCDA(). Also broke file format read into functions that first read
the file type, then check the version.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196353 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of asking the user to specify a single file to output coverage
info and defaulting to STDOUT, llvm-cov now creates files for each
source file with a naming system of: <source filename> + ".llcov".
This is what gcov does and although it can clutter the working directory
with numerous coverage files, it will be easier to hook the llvm-cov
output to tools which operate on this assumption (such as lcov).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196184 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow for much easier testing when the input files are in a
different folder from the test script.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194034 91177308-0d34-0410-b5e6-96231b3b80d8
- Replaced tabs with proper padding
- print() takes two arguments, which are the GCNO and GCDA filenames
- Files are listed at the top of output, appended by line 0
- Stripped strings of trailing \0s
- Removed last two lines of whitespace in output
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193148 91177308-0d34-0410-b5e6-96231b3b80d8
collectLineCounts() should only organize the output data. This is done in
anticipation of subsequent changes which will pass in GCNO and GCDA filenames
into the print function where it is printed similar to the gcov output.
Patch by Yuchen Wu!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193134 91177308-0d34-0410-b5e6-96231b3b80d8
Add llvm-cov skeleton. It has initial support to read coverage info generated by GCOVProfiling.cpp.
Today, you can do
prompt> clang a.c -ftest-coverage -fprofile-arcs -o a
prompt> ./a
prompt> llvm-cov -gcno a.gcno -gcda a.gcda
a.c
: #include "a.h"
:
: int main() {
: int i = 0;
: if (i) {
1: int j = 0;
1: j = 1;
1: } else {
: int k = 1;
: k = 2;
: }
1: return 0;
: }
:
:
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140712 91177308-0d34-0410-b5e6-96231b3b80d8
