where it is not available. It's unclear how to get this inserted
computation into GVN's scalar availability sets, Owen, help? :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89997 91177308-0d34-0410-b5e6-96231b3b80d8
The hasNoModRefInfoForCalls isn't worth it as a filter because
basicaa provides m/r info and everything chains to it, so remove
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89599 91177308-0d34-0410-b5e6-96231b3b80d8
it may be used in contexts where preheader insertion may have failed due
to an indirectbr.
Make LoopSimplify's LoopSimplify::SeparateNestedLoop properly fail in
the case that it would require splitting an indirectbr edge.
These fix PR5502.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89484 91177308-0d34-0410-b5e6-96231b3b80d8
if it is not ultimately captured. Teach BasicAliasAnalysis that a
local object address which does not escape and is never stored does
not alias with a value resulting from a load.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89398 91177308-0d34-0410-b5e6-96231b3b80d8
cannot be folded into target cmp instruction.
- Avoid a phase ordering issue where early cmp optimization would prevent the
later count-to-zero optimization.
- Add missing checks which could cause LSR to reuse stride that does not have
users.
- Fix a bug in count-to-zero optimization code which failed to find the pre-inc
iv's phi node.
- Remove, tighten, loosen some incorrect checks disable valid transformations.
- Quite a bit of code clean up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86969 91177308-0d34-0410-b5e6-96231b3b80d8
This allows StringRef to skip controversial if(str) check in constructor.
Buildbots, wait for corresponding clang and llvm-gcc FE check-ins!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86914 91177308-0d34-0410-b5e6-96231b3b80d8
start using them in a trivial way when -enable-jump-threading-lvi
is passed. enable-jump-threading-lvi will be my playground for
awhile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86789 91177308-0d34-0410-b5e6-96231b3b80d8
except that the result may not be a constant. Switch jump threading to
use it so that it gets things like (X & 0) -> 0, which occur when phi preds
are deleted and the remaining phi pred was a zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86637 91177308-0d34-0410-b5e6-96231b3b80d8
This patch forbids implicit conversion of DenseMap::const_iterator to
DenseMap::iterator which was possible because DenseMapIterator inherited
(publicly) from DenseMapConstIterator. Conversion the other way around is now
allowed as one may expect.
The template DenseMapConstIterator is removed and the template parameter
IsConst which specifies whether the iterator is constant is added to
DenseMapIterator.
Actually IsConst parameter is not necessary since the constness can be
determined from KeyT but this is not relevant to the fix and can be addressed
later.
Patch by Victor Zverovich!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86636 91177308-0d34-0410-b5e6-96231b3b80d8
Simplify[IF]Cmp pieces. Add some predicates to CmpInst to
determine whether a predicate is fp or int.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86624 91177308-0d34-0410-b5e6-96231b3b80d8
takes decimated instructions and applies identities to them. This
is pretty minimal at this point, but I plan to pull some instcombine
logic out into these and similar routines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86613 91177308-0d34-0410-b5e6-96231b3b80d8
Here is the original commit message:
This commit updates malloc optimizations to operate on malloc calls that have constant int size arguments.
Update CreateMalloc so that its callers specify the size to allocate:
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86311 91177308-0d34-0410-b5e6-96231b3b80d8
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86077 91177308-0d34-0410-b5e6-96231b3b80d8
ArraySize * ElementSize
ElementSize * ArraySize
ArraySize << log2(ElementSize)
ElementSize << log2(ArraySize)
Refactor isArrayMallocHelper and delete isSafeToGetMallocArraySize, so that there is only 1 copy of the malloc array determining logic.
Update users of getMallocArraySize() to not bother calling isArrayMalloc() as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85421 91177308-0d34-0410-b5e6-96231b3b80d8
Remove LowerAllocations pass.
Update some more passes to treate free calls just like they were treating FreeInst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85176 91177308-0d34-0410-b5e6-96231b3b80d8
used elsewhere - an exit block is a block outside the loop branched to
from within the loop. An exiting block is a block inside the loop that
branches out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85019 91177308-0d34-0410-b5e6-96231b3b80d8
Update all analysis passes and transforms to treat free calls just like FreeInst.
Remove RaiseAllocations and all its tests since FreeInst no longer needs to be raised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84987 91177308-0d34-0410-b5e6-96231b3b80d8
Analysis/ConstantFolding.cpp. This doesn't change the behavior of
instcombine but makes other clients of ConstantFoldInstruction
able to handle loads. This was partially extracted from Eli's patch
in PR3152.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84836 91177308-0d34-0410-b5e6-96231b3b80d8
identifying the malloc as a non-array malloc. This broke GlobalOpt's optimization of stores of mallocs
to global variables.
The fix is to classify malloc's into 3 categories:
1. non-array mallocs
2. array mallocs whose array size can be determined
3. mallocs that cannot be determined to be of type 1 or 2 and cannot be optimized
getMallocArraySize() returns NULL for category 3, and all users of this function must avoid their
malloc optimization if this function returns NULL.
Eventually, currently unexpected codegen for computing the malloc's size argument will be supported in
isArrayMalloc() and getMallocArraySize(), extending malloc optimizations to those examples.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84199 91177308-0d34-0410-b5e6-96231b3b80d8
"LoopVR's logic was copied into ScalarEvolution::getUnsignedRange and
::getSignedRange. Please delete LoopVR."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83531 91177308-0d34-0410-b5e6-96231b3b80d8
question, can we get rid of the BasicBlock versions of all inserters
and use Head == 0 to indicate the old case when GetInsertBlock == 0?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83216 91177308-0d34-0410-b5e6-96231b3b80d8
information. This allows arbitrary code involving DW_OP_plus_uconst
and DW_OP_deref. The scheme allows for easy extention to include,
any, or all of the DW_OP_ opcodes. I thought about just exposing all
of them, but, wasn't sure if people wanted the dwarf opcodes exposed
in the api. Is that a layering violation?
With this scheme, the entire existing block scheme used by llvm-gcc
can be switched over to the new scheme. I think that would be
cleaner, as then the compiler specific bits are not present in llvm
proper. Before the old code can be yanked however, similar code in
clang would have to be removed.
Next up, more testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83120 91177308-0d34-0410-b5e6-96231b3b80d8
the PassManager code into a regular verifyAnalysis method.
Also, reorganize loop verification. Make the LoopPass infrastructure
call verifyLoop as needed instead of having LoopInfo::verifyAnalysis
check every loop in the function after each looop pass. Add a new
command-line argument, -verify-loop-info, to enable the expensive
full checking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82952 91177308-0d34-0410-b5e6-96231b3b80d8
to. This can be combined with LCSSA or SSI form to store more information on a
PHINode than can be computed by looking at its incoming values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82317 91177308-0d34-0410-b5e6-96231b3b80d8
In getMallocArraySize(), fix bug in the case that array size is the product of 2 constants.
Extend isArrayMalloc() and getMallocArraySize() to handle case where malloc is used as char array.
Ensure that ArraySize in LowerAllocations::runOnBasicBlock() is correct type.
Extend Instruction::isSafeToSpeculativelyExecute() to handle malloc calls.
Add verification for malloc calls.
Reviewed by Dan Gohman.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82257 91177308-0d34-0410-b5e6-96231b3b80d8
where the induction variable has a non-unit stride, such as {0,+,2}, and
there are expressions such as {1,+,2} inside the loop formed with
or or add nsw operators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82151 91177308-0d34-0410-b5e6-96231b3b80d8
argpromote to avoid invalidating an iterator. This fixes PR4977.
All clang tests now pass with expensive checking (on my system
at least).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81843 91177308-0d34-0410-b5e6-96231b3b80d8
that get created during loop unswitching, and fix SplitBlockPredecessors'
LCSSA updating code to create new PHIs instead of trying to just move
existing ones.
Also, optimize Loop::verifyLoop, since it gets called a lot. Use
searches on a sorted list of blocks instead of calling the "contains"
function, as is done in other places in the Loop class, since "contains"
does a linear search. Also, don't call verifyLoop from LoopSimplify or
LCSSA, as the PassManager is already calling verifyLoop as part of
LoopInfo's verifyAnalysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81221 91177308-0d34-0410-b5e6-96231b3b80d8
that these passes are properly preserved.
Fix several transformation passes that claimed to preserve LoopSimplify
form but weren't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80926 91177308-0d34-0410-b5e6-96231b3b80d8
LoopSimplify form, which is currently only available on Loops (and
not MachineLoops). Also, move the code out of the header file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80923 91177308-0d34-0410-b5e6-96231b3b80d8
Optimal edge profiling is only possible when blocks with no predecessors get an
virtual edge (BB,0) that counts the execution frequencies of this
function-exiting blocks.
This patch makes the necessary changes before actually enabling optimal edge profiling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80667 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a pass to verify the current profile against the flow conditions.
This is very helpful when later on trying to perserve the profiling information
during all passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80666 91177308-0d34-0410-b5e6-96231b3b80d8
for sanity. This didn't turn up any bugs.
Change CallGraphNode to maintain its "callsite" information in the
call edges list as a WeakVH instead of as an instruction*. This fixes
a broad class of dangling pointer bugs, and makes CallGraph have a number
of useful invariants again. This fixes the class of problem indicated
by PR4029 and PR3601.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80663 91177308-0d34-0410-b5e6-96231b3b80d8
modify the type and location debug information for these variables to match the
programmer's expectations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80625 91177308-0d34-0410-b5e6-96231b3b80d8
SCEVUnknowns, as the non-SCEVUnknown cases in the getSCEVAtScope code
can also end up repeatedly climing through the same expression trees,
which can be unusably slow when the trees are very tall.
Also, add a quick check for SCEV pointer equality to the main
SCEV comparison routine, as the full comparison code can be expensive
in the case of large expression trees.
These fix compile-time problems in some pathlogical cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80623 91177308-0d34-0410-b5e6-96231b3b80d8
stem from the fact that we have two types of passes that need to update it:
1. callgraphscc and module passes that are explicitly aware of it
2. Functionpasses (and loop passes etc) that are interlaced with CGSCC passes
by the CGSCC Passmgr.
In the case of #1, we can reasonably expect the passes to update the call
graph just like any analysis. However, functionpasses are not and generally
should not be CG aware. This has caused us no end of problems, so this takes
a new approach. Logically, the CGSCC Pass manager can rescan every function
after it runs a function pass over it to see if the functionpass made any
updates to the IR that affect the callgraph. This allows it to catch new calls
introduced by the functionpass.
In practice, doing this would be slow. This implementation keeps track of
whether or not the current scc is dirtied by a function pass, and, if so,
delays updating the callgraph until it is actually needed again. This was
we avoid extraneous rescans, but we still have good invariants when the
callgraph is needed.
Step #2 of the "give Callgraph some sane invariants" is to change CallGraphNode
to use a CallBackVH for the callsite entry of the CallGraphNode. This way
we can immediately remove entries from the callgraph when a FunctionPass is
active instead of having dangling pointers. The current pass tries to tolerate
these dangling pointers, but it is just an evil hack.
This is related to PR3601/4835/4029. This also reverts r80541, a hack working
around the sad lack of invariants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80566 91177308-0d34-0410-b5e6-96231b3b80d8
indirect function pointer, inline it, then go to delete the body.
The problem is that the callgraph had other references to the function,
though the inliner had no way to know it, so we got a dangling pointer
and an invalid iterator out of the deal.
The fix to this is pretty simple: stop the inliner from deleting the
function by knowing that there are references to it. Do this by making
CallGraphNodes contain a refcount. This requires moving deletion of
available_externally functions to the module-level cleanup sweep where
it belongs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80533 91177308-0d34-0410-b5e6-96231b3b80d8
argpromotion and structretpromote. Basically, when replacing
a function, they used the 'changeFunction' api which changes
the entry in the function map (and steals/reuses the callgraph
node).
This has some interesting effects: first, the problem is that it doesn't
update the "callee" edges in any callees of the function in the call graph.
Second, this covers for a major problem in all the CGSCC pass stuff, which
is that it is completely broken when functions are deleted if they *don't*
reuse a CGN. (there is a cute little fixme about this though :).
This patch changes the protocol that CGSCC passes must obey: now the CGSCC
pass manager copies the SCC and preincrements its iterator to avoid passes
invalidating it. This allows CGSCC passes to mutate the current SCC. However
multiple passes may be run on that SCC, so if passes do this, they are now
required to *update* the SCC to be current when they return.
Other less interesting parts of this patch are that it makes passes update
the CG more directly, eliminates changeFunction, and requires clients of
replaceCallSite to specify the new callee CGN if they are changing it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80527 91177308-0d34-0410-b5e6-96231b3b80d8
