The bitcode representation attribute kinds are encoded into / decoded from
should be independent of the current set of LLVM attributes and their position
in the AttrKind enum. This patch explicitly encodes attributes to fixed bitcode
values.
With this patch applied, LLVM does not silently misread attributes written by
LLVM 3.3. We also enhance the decoding slightly such that an error message is
printed if an unknown AttrKind encoding was dected.
Bonus: Dropping bitcode attributes from AttrKind is now easy, as old AttrKinds
do not need to be kept to support the Bitcode reader.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187186 91177308-0d34-0410-b5e6-96231b3b80d8
These are two related changes (one in llvm, one in clang).
LLVM:
- rename address_safety => sanitize_address (the enum value is the same, so we preserve binary compatibility with old bitcode)
- rename thread_safety => sanitize_thread
- rename no_uninitialized_checks -> sanitize_memory
CLANG:
- add __attribute__((no_sanitize_address)) as a synonym for __attribute__((no_address_safety_analysis))
- add __attribute__((no_sanitize_thread))
- add __attribute__((no_sanitize_memory))
for S in address thread memory
If -fsanitize=S is present and __attribute__((no_sanitize_S)) is not
set llvm attribute sanitize_S
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176075 91177308-0d34-0410-b5e6-96231b3b80d8
to the instruction position. The old encoding would give an absolute
ID which counts up within a function, and only resets at the next function.
I.e., Instead of having:
... = icmp eq i32 n-1, n-2
br i1 ..., label %bb1, label %bb2
it will now be roughly:
... = icmp eq i32 1, 2
br i1 1, label %bb1, label %bb2
This makes it so that ids remain relatively small and can be encoded
in fewer bits.
With this encoding, forward reference operands will be given
negative-valued IDs. Use signed VBRs for the most common case
of forward references, which is phi instructions.
To retain backward compatibility we bump the bitcode version
from 0 to 1 to distinguish between the different encodings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165739 91177308-0d34-0410-b5e6-96231b3b80d8
We inserted a placeholder that was never replaced because the function was
already visited. Assert that all placeholders have been resolved when tearing
down the bitcode reader.
Fixes PR13895.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164369 91177308-0d34-0410-b5e6-96231b3b80d8
intrinsics. The second instruction(s) to be handled are the vector versions
of count set bits (ctpop).
The changes here are to clang so that it generates a target independent
vector ctpop when it sees an ARM dependent vector bits set count. The changes
in llvm are to match the target independent vector ctpop and in
VMCore/AutoUpgrade.cpp to update any existing bc files containing ARM
dependent vector pop counts with target-independent ctpops. There are also
changes to an existing test case in llvm for ARM vector count instructions and
to a test for the bitcode upgrade.
<rdar://problem/11892519>
There is deliberately no test for the change to clang, as so far as I know, no
consensus has been reached regarding how to test neon instructions in clang;
q.v. <rdar://problem/8762292>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160410 91177308-0d34-0410-b5e6-96231b3b80d8
intrinsics with target-indepdent intrinsics. The first instruction(s) to be
handled are the vector versions of count leading zeros (ctlz).
The changes here are to clang so that it generates a target independent
vector ctlz when it sees an ARM dependent vector ctlz. The changes in llvm
are to match the target independent vector ctlz and in VMCore/AutoUpgrade.cpp
to update any existing bc files containing ARM dependent vector ctlzs with
target-independent ctlzs. There are also changes to an existing test case in
llvm for ARM vector count instructions and a new test for the bitcode upgrade.
<rdar://problem/11831778>
There is deliberately no test for the change to clang, as so far as I know, no
consensus has been reached regarding how to test neon instructions in clang;
q.v. <rdar://problem/8762292>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160200 91177308-0d34-0410-b5e6-96231b3b80d8
a pipeline, and then a positive assertion via grep, use two RUN lines
instead.
Supporting these complex ideas of 'success' and 'failure' across
multiple stages of a pipeline is brittle in the shell world, and would
block switching to ShTest format; it only worked due to contrivances
introduced by the TclTest format.
Writing this as two separate RUN lines seems clearer in any event.
This is another step toward completely removing TclTests from lit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159524 91177308-0d34-0410-b5e6-96231b3b80d8
Attribute bits above 1<<30 are now encoded correctly. Additionally,
the encoding/decoding functionality has been hoisted to helper functions
in Attributes.h in an effort to help the encoding/decoding to stay in
sync with the Attribute bitcode definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157581 91177308-0d34-0410-b5e6-96231b3b80d8
Ordinary patch for PR1255.
Added new case-ranges orientated methods for adding/removing cases in SwitchInst. After this patch cases will internally representated as ConstantArray-s instead of ConstantInt, externally cases wrapped within the ConstantRangesSet object.
Old methods of SwitchInst are also works well, but marked as deprecated. So on this stage we have no side effects except that I added support for case ranges in BitcodeReader/Writer, of course test for Bitcode is also added. Old "switch" format is also supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156704 91177308-0d34-0410-b5e6-96231b3b80d8
Added new case-ranges orientated methods for adding/removing cases in SwitchInst. After this patch cases will internally representated as ConstantArray-s instead of ConstantInt, externally cases wrapped within the ConstantRangesSet object.
Old methods of SwitchInst are also works well, but marked as deprecated. So on this stage we have no side effects except that I added support for case ranges in BitcodeReader/Writer, of course test for Bitcode is also added. Old "switch" format is also supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156374 91177308-0d34-0410-b5e6-96231b3b80d8
fix up later. For this special case, allow such a mask to be considered valid.
<rdar://problem/8622574>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142992 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM 2.9. My understanding is that we plan to maintain compatibility with 2.9
until the 3.1 release. At that time we can generate new test cases using LLVM
3.0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142958 91177308-0d34-0410-b5e6-96231b3b80d8
for pre-2.9 bitcode files. We keep x86 unaligned loads, movnt, crc32, and the
target indep prefetch change.
As usual, updating the testsuite is a PITA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133337 91177308-0d34-0410-b5e6-96231b3b80d8
fixes aliasing issues with the old and new names as well as adds test
cases for the auto-upgrader.
Fixes rdar 9472944.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132207 91177308-0d34-0410-b5e6-96231b3b80d8
assert in the bitcode writer. No change needed because the ValueEnumerator holds
a whole-module numbering anyhow. Fixes PR9857!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131016 91177308-0d34-0410-b5e6-96231b3b80d8
was lowering them to sext / uxt + mul instructions. Unfortunately the
optimization passes may hoist the extensions out of the loop and separate them.
When that happens, the long multiplication instructions can be broken into
several scalar instructions, causing significant performance issue.
Note the vmla and vmls intrinsics are not added back. Frontend will codegen them
as intrinsics vmull* + add / sub. Also note the isel optimizations for catching
mul + sext / zext are not changed either.
First part of rdar://8832507, rdar://9203134
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128502 91177308-0d34-0410-b5e6-96231b3b80d8
The x86_mmx type is used for MMX intrinsics, parameters and
return values where these use MMX registers, and is also
supported in load, store, and bitcast.
Only the above operations generate MMX instructions, and optimizations
do not operate on or produce MMX intrinsics.
MMX-sized vectors <2 x i32> etc. are lowered to XMM or split into
smaller pieces. Optimizations may occur on these forms and the
result casted back to x86_mmx, provided the result feeds into a
previous existing x86_mmx operation.
The point of all this is prevent optimizations from introducing
MMX operations, which is unsafe due to the EMMS problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115243 91177308-0d34-0410-b5e6-96231b3b80d8
vabd intrinsic and add and/or zext operations. In the case of vaba, this
also avoids the need for a DAG combine pattern to combine vabd with add.
Update tests. Auto-upgrade the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112941 91177308-0d34-0410-b5e6-96231b3b80d8
add, and subtract operations with zero-extended or sign-extended vectors.
Update tests. Add auto-upgrade support for the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112773 91177308-0d34-0410-b5e6-96231b3b80d8
IR add/sub operations with one or both operands sign- or zero-extended.
Auto-upgrade the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112416 91177308-0d34-0410-b5e6-96231b3b80d8
Update all the tests using those intrinsics and add support for
auto-upgrading bitcode files with the old versions of the intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112271 91177308-0d34-0410-b5e6-96231b3b80d8
shifts and null vectors. Autoupgrade these to what we'd lower them to.
Add a testcase to exercise this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101851 91177308-0d34-0410-b5e6-96231b3b80d8
Added support for address spaces and added a isVolatile field to memcpy, memmove, and memset,
e.g., llvm.memcpy.i32(i8*, i8*, i32, i32) -> llvm.memcpy.p0i8.p0i8.i32(i8*, i8*, i32, i32, i1)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100304 91177308-0d34-0410-b5e6-96231b3b80d8
