method that returns its result as a DepResultTy instead of as a
MemDepResult. This reduces conversion back and forth.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60266 91177308-0d34-0410-b5e6-96231b3b80d8
dependencies. The basic situation was this: consider if we had:
store1
...
store2
...
store3
Where memdep thinks that store3 depends on store2 and store2 depends
on store1. The problem happens when we delete store2: The code in
question was updating dep info for store3 to be store1. This is a
spiffy optimization, but is not safe at all, because aliasing isn't
transitive. This bug isn't exposed today with DSE because DSE will only
zap store2 if it is identifical to store 3, and in this case, it is
safe to update it to depend on store1. However, memcpyopt is not so
fortunate, which is presumably why the "dropInstruction" code used to
exist.
Since this doesn't actually provide a speedup in practice, just rip the
code out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60263 91177308-0d34-0410-b5e6-96231b3b80d8
an entry in the nonlocal deps map, don't reset entries
referencing that instruction to [dirty, null], instead, set
them to [dirty,next] where next is the instruction after the
deleted one. Use this information in the non-local deps
code to avoid rescanning entire blocks.
This speeds up GVN slightly by avoiding pointless work. On
403.gcc this makes GVN 1.5% faster.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60256 91177308-0d34-0410-b5e6-96231b3b80d8
Put a some code back to handle buggy behavior that GVN expects: it wants
loads to depend on each other, and accesses to depend on their allocations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60240 91177308-0d34-0410-b5e6-96231b3b80d8
former does caching, the later doesn't. This dramatically simplifies
the logic in getDependency and getDependencyFrom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60234 91177308-0d34-0410-b5e6-96231b3b80d8
Document the Dirty value more precisely, use it for the uninitialized
DepResultTy value. Change reverse mappings to be from an instruction*
instead of DepResultTy, and stop tracking other forms. This makes it more
clear that we only care about the instruction cases.
Eliminate a DepResultTy,bool pair by using Dirty in the local case as well,
shrinking the map and simplifying the code.
This speeds up GVN by ~3% on 403.gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60232 91177308-0d34-0410-b5e6-96231b3b80d8
query. This makes it crystal clear what cases can escape from MemDep that
the clients have to handle. This also gives the clients a nice simplified
interface to it that is easy to poke at.
This patch also makes DepResultTy and MemoryDependenceAnalysis::DepType
private, yay.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60231 91177308-0d34-0410-b5e6-96231b3b80d8
of a pointer/int pair instead of a manually bitmangled pointer.
This forces clients to think a little more about checking the
appropriate pieces and will be useful for internal
implementation improvements later.
I'm not particularly happy with this. After going through this
I don't think that the clients of memdep should be exposed to
the internal type at all. I'll fix this in a subsequent commit.
This has no functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60230 91177308-0d34-0410-b5e6-96231b3b80d8
properly updates the reverse dependency map when it installs updated
dependencies for instructions that depend on the removed instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60222 91177308-0d34-0410-b5e6-96231b3b80d8
but it doesn't make any sense at all.
Also make the method const, private, and fit in 80 cols while we're at it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@60215 91177308-0d34-0410-b5e6-96231b3b80d8
circumstances we could end up remapping a dependee to the same instruction
that we're trying to remove. Handle this properly by just falling back to
a conservative solution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54132 91177308-0d34-0410-b5e6-96231b3b80d8
several things that were neither in an anonymous namespace nor static
but not intended to be global.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51017 91177308-0d34-0410-b5e6-96231b3b80d8
into alias analysis. This meant updating the API
which now has versions of the getModRefBehavior,
doesNotAccessMemory and onlyReadsMemory methods
which take a callsite parameter. These should be
used unless the callsite is not known, since in
general they can do a better job than the versions
that take a function. Also, users should no longer
call the version of getModRefBehavior that takes
both a function and a callsite. To reduce the
chance of misuse it is now protected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44487 91177308-0d34-0410-b5e6-96231b3b80d8
The meaning of getTypeSize was not clear - clarifying it is important
now that we have x86 long double and arbitrary precision integers.
The issue with long double is that it requires 80 bits, and this is
not a multiple of its alignment. This gives a primitive type for
which getTypeSize differed from getABITypeSize. For arbitrary precision
integers it is even worse: there is the minimum number of bits needed to
hold the type (eg: 36 for an i36), the maximum number of bits that will
be overwriten when storing the type (40 bits for i36) and the ABI size
(i.e. the storage size rounded up to a multiple of the alignment; 64 bits
for i36).
This patch removes getTypeSize (not really - it is still there but
deprecated to allow for a gradual transition). Instead there is:
(1) getTypeSizeInBits - a number of bits that suffices to hold all
values of the type. For a primitive type, this is the minimum number
of bits. For an i36 this is 36 bits. For x86 long double it is 80.
This corresponds to gcc's TYPE_PRECISION.
(2) getTypeStoreSizeInBits - the maximum number of bits that is
written when storing the type (or read when reading it). For an
i36 this is 40 bits, for an x86 long double it is 80 bits. This
is the size alias analysis is interested in (getTypeStoreSize
returns the number of bytes). There doesn't seem to be anything
corresponding to this in gcc.
(3) getABITypeSizeInBits - this is getTypeStoreSizeInBits rounded
up to a multiple of the alignment. For an i36 this is 64, for an
x86 long double this is 96 or 128 depending on the OS. This is the
spacing between consecutive elements when you form an array out of
this type (getABITypeSize returns the number of bytes). This is
TYPE_SIZE in gcc.
Since successive elements in a SequentialType (arrays, pointers
and vectors) need to be aligned, the spacing between them will be
given by getABITypeSize. This means that the size of an array
is the length times the getABITypeSize. It also means that GEP
computations need to use getABITypeSize when computing offsets.
Furthermore, if an alloca allocates several elements at once then
these too need to be aligned, so the size of the alloca has to be
the number of elements multiplied by getABITypeSize. Logically
speaking this doesn't have to be the case when allocating just
one element, but it is simpler to also use getABITypeSize in this
case. So alloca's and mallocs should use getABITypeSize. Finally,
since gcc's only notion of size is that given by getABITypeSize, if
you want to output assembler etc the same as gcc then getABITypeSize
is the size you want.
Since a store will overwrite no more than getTypeStoreSize bytes,
and a read will read no more than that many bytes, this is the
notion of size appropriate for alias analysis calculations.
In this patch I have corrected all type size uses except some of
those in ScalarReplAggregates, lib/Codegen, lib/Target (the hard
cases). I will get around to auditing these too at some point,
but I could do with some help.
Finally, I made one change which I think wise but others might
consider pointless and suboptimal: in an unpacked struct the
amount of space allocated for a field is now given by the ABI
size rather than getTypeStoreSize. I did this because every
other place that reserves memory for a type (eg: alloca) now
uses getABITypeSize, and I didn't want to make an exception
for unpacked structs, i.e. I did it to make things more uniform.
This only effects structs containing long doubles and arbitrary
precision integers. If someone wants to pack these types more
tightly they can always use a packed struct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43620 91177308-0d34-0410-b5e6-96231b3b80d8
alias analysis, adding caching and lazy computation of queries. This will
be used in planned improvements to memory access optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37958 91177308-0d34-0410-b5e6-96231b3b80d8
