When assigned ranges are evicted, they are put in the RS_Evicted stage and are
not allowed to evict anything else. That prevents looping automatically.
When evicting ranges just to get a cheaper register, use only spill weights to
find the possible candidates. Avoid breaking hints for this purpose, it is not
worth it.
Start implementing more complex eviction heuristics, guarded by the temporary
-complex-eviction flag. The initial version permits a heavier range to be
evicted if it doesn't have any uses where the evicting range is live. This makes
it a good candidate for live ranfge splitting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132358 91177308-0d34-0410-b5e6-96231b3b80d8
Delete the Kill and Def markers in BlockInfo. They are no longer
necessary when BlockInfo describes a continuous live range.
This only affects the relatively rare kind of basic block where a live
range looks like this:
|---x o---|
Now live range splitting can pretend that it is looking at two blocks:
|---x
o---|
This allows the code to be simplified a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132245 91177308-0d34-0410-b5e6-96231b3b80d8
It is important that this function returns the same number of live blocks as
countLiveBlocks(CurLI) because live range splitting uses the number of live
blocks to ensure it is making progress.
This is in preparation of supporting duplicate UseBlock entries for basic blocks
that have a virtual register live-in and live-out, but not live-though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132244 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't change functionality (much), but it allows for a more fine-grained
eviction policy. The current policy only compares spill weights, and that is not
always the best thing to do. Spill weights are designed to serve linear scan,
and they don't consider live range splitting.
Add a mechanism so canEvict() can request that a live range be evicted and
split/spilled. This is to avoid infinite eviction loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132101 91177308-0d34-0410-b5e6-96231b3b80d8
The previous invalidation missed the alias interference caches.
Also add a stats counter for the number of repaired ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131133 91177308-0d34-0410-b5e6-96231b3b80d8
This can't be just an assertion, users can always write impossible inline
assembly. Such an assembly statement should be included in the error message.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131024 91177308-0d34-0410-b5e6-96231b3b80d8
After a virtual register is split, update any debug user variables that resided
in the old register. This ensures that the LiveDebugVariables are still correct
after register allocation.
This may create DBG_VALUE instructions that place a user variable in a register
in parts of the function and in a stack slot in other parts. DwarfDebug
currently doesn't support that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130998 91177308-0d34-0410-b5e6-96231b3b80d8
Register coalescing can sometimes create live ranges that end in the middle of a
basic block without any killing instruction. When SplitKit detects this, it will
repair the live range by shrinking it to its uses.
Live range splitting also needs to know about this. When the range shrinks so
much that it becomes allocatable, live range splitting fails because it can't
find a good split point. It is paranoid about making progress, so an allocatable
range is considered an error.
The coalescer should really not be creating these bad live ranges. They appear
when coalescing dead copies.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130787 91177308-0d34-0410-b5e6-96231b3b80d8
The number of blocks covered by a live range must be strictly decreasing when
splitting, otherwise we can't allow repeated splitting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130249 91177308-0d34-0410-b5e6-96231b3b80d8
These intervals are allocatable immediately after splitting, but they may be
evicted because of later splitting. This is rare, but when it happens they
should be split again.
The remainder intervals that cannot be allocated after splitting still move
directly to spilling.
SplitEditor::finish can optionally provide a mapping from new live intervals
back to the original interval indexes returned by openIntv().
Each original interval index can map to multiple new intervals after connected
components have been separated. Dead code elimination may also add existing
intervals to the list.
The reverse mapping allows the SplitEditor client to treat the new intervals
differently depending on the split region they came from.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129925 91177308-0d34-0410-b5e6-96231b3b80d8
On the x86-64 and thumb2 targets, some registers are more expensive to encode
than others in the same register class.
Add a CostPerUse field to the TableGen register description, and make it
available from TRI->getCostPerUse. This represents the cost of a REX prefix or a
32-bit instruction encoding required by choosing a high register.
Teach the greedy register allocator to prefer cheap registers for busy live
ranges (as indicated by spill weight).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129864 91177308-0d34-0410-b5e6-96231b3b80d8
Use a Bitvector instead, we didn't need the smaller memory footprint anyway.
This makes the greedy register allocator 10% faster.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129390 91177308-0d34-0410-b5e6-96231b3b80d8
This merges the behavior of splitSingleBlocks into splitAroundRegion, so the
RS_Region and RS_Block register stages can be coalesced. That means the leftover
intervals after region splitting go directly to spilling instead of a second
pass of per-block splitting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129379 91177308-0d34-0410-b5e6-96231b3b80d8
It is common for large live ranges to have few basic blocks with register uses
and many live-through blocks without any uses. This approach grows the Hopfield
network incrementally around the use blocks, completely avoiding checking
interference for some through blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129188 91177308-0d34-0410-b5e6-96231b3b80d8
About 90% of the relevant blocks are live-through without uses, and the only
information required about them is their number. This saves memory and enables
later optimizations that need to look at only the use-blocks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128985 91177308-0d34-0410-b5e6-96231b3b80d8
When the greedy register allocator is splitting multiple global live ranges, it
tends to look at the same interference data many times. The InterferenceCache
class caches queries for unaltered LiveIntervalUnions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128764 91177308-0d34-0410-b5e6-96231b3b80d8
When DCE clones a live range because it separates into connected components,
make sure that the clones enter the same register allocator stage as the
register they were cloned from.
For instance, clones may be split even when they where created during spilling.
Other registers created during spilling are not candidates for splitting or even
(re-)spilling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128524 91177308-0d34-0410-b5e6-96231b3b80d8
The reassignment phase was able to move interference with a higher spill weight,
but it didn't happen very often and it was fairly expensive.
The existing interference eviction picks up the slack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128397 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the allocator to free any resources used by the virtual register,
including physical register assignments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127560 91177308-0d34-0410-b5e6-96231b3b80d8
This will we used for keeping register allocator data structures up to date
while LiveRangeEdit is trimming live intervals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127300 91177308-0d34-0410-b5e6-96231b3b80d8
The global cost is the sum of block frequencies for spill code that must be
inserted because preferences weren't met.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127062 91177308-0d34-0410-b5e6-96231b3b80d8
This simplifies the code and makes it faster too.
The interference patterns are saved for each candidate register. It will be
reused for actually executing the split. Work in progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127054 91177308-0d34-0410-b5e6-96231b3b80d8
It gives better results. Sometimes, a live range can be large and still have
high spill weight. Such a range should not be spilled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@127036 91177308-0d34-0410-b5e6-96231b3b80d8
This is a waste of time since we already know how to evict all interferences
which is a better approach anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126798 91177308-0d34-0410-b5e6-96231b3b80d8
This effectively disables the 'turbo' functionality of the greedy register
allocator where all new live ranges created by splitting would be reconsidered
as if they were originals.
There are two reasons for doing this, 1. It guarantees that the algorithm
terminates. Early versions were prone to infinite looping in certain corner
cases. 2. It is a 2x speedup. We can skip a lot of unnecessary interference
checks that won't lead to good splitting anyway.
The problem is that region splitting only gets one shot, so it should probably
be changed to target multiple physical registers at once.
Local live range splitting is still 'turbo' enabled. It only accounts for a
small fraction of compile time, so it is probably not necessary to do anything
about that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126781 91177308-0d34-0410-b5e6-96231b3b80d8
New live ranges are assigned in long -> short order, but live ranges that have
been evicted at least once are deferred and assigned in short -> long order.
Also disable splitting and spilling for live ranges seen for the first time.
The intention is to create a realistic interference pattern from the heavy live
ranges before starting splitting and spilling around it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126451 91177308-0d34-0410-b5e6-96231b3b80d8
When a large live range is evicted, it will usually be split when it comes
around again. By deferring evicted live ranges, the splitting happens at a time
when the interference pattern is more realistic. This prevents repeated
splitting and evictions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126282 91177308-0d34-0410-b5e6-96231b3b80d8
Use interval sizes instead of spill weights to determine if it is legal to evict
interference. A smaller interval can evict interference if all interfering live
ranges are larger.
Allow multiple interferences to be evicted as along as they are all larger than
the live range being allocated.
Spill weights are still used to select the preferred eviction candidate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126276 91177308-0d34-0410-b5e6-96231b3b80d8
This is based on the observation that long live ranges are more difficult to
allocate, so there is a better chance of solving the puzzle by handling the big
pieces first. The allocator will evict and split long alive ranges when they get
in the way.
RABasic is still using spill weights for its priority queue, so the interface to
the queue has been virtualized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126259 91177308-0d34-0410-b5e6-96231b3b80d8
An original endpoint is an instruction that killed or defined the original live
range before any live ranges were split.
When splitting global live ranges, avoid creating local live ranges without any
original endpoints. We may still create global live ranges without original
endpoints, but such a range won't be split again, and live range splitting still
terminates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@126151 91177308-0d34-0410-b5e6-96231b3b80d8
The rewriter works almost identically to -rewriter=trivial, except it also
eliminates any identity copies.
This makes the new register allocators independent of VirtRegRewriter.cpp which
will be going away at the same time as RegAllocLinearScan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125967 91177308-0d34-0410-b5e6-96231b3b80d8
A local live range is live in a single basic block. If such a range fails to
allocate, try to find a sub-range that would get a larger spill weight than its
interference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125764 91177308-0d34-0410-b5e6-96231b3b80d8
Registers are not allocated strictly in spill weight order when live range
splitting and spilling has created new shorter intervals with higher spill
weights.
When one of the new heavy intervals conflicts with a single lighter interval,
simply evict the old interval instead of trying to split the heavy one.
The lighter interval is a better candidate for splitting, it has a smaller use
density.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125151 91177308-0d34-0410-b5e6-96231b3b80d8
The last split point can be anywhere in the block, so it interferes with the
strictly monotonic requirements of advanceTo().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125132 91177308-0d34-0410-b5e6-96231b3b80d8
This is a lot easier than trying to get kill flags right during live range
splitting and rematerialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125113 91177308-0d34-0410-b5e6-96231b3b80d8
If a live range is used by a terminator instruction, and that live range needs
to leave the block on the stack or in a different register, it can be necessary
to have both sides of the split live at the terminator instruction.
Example:
%vreg2 = COPY %vreg1
JMP %vreg1
Becomes after spilling %vreg2:
SPILL %vreg1
JMP %vreg1
The spill doesn't kill the register as is normally the case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125102 91177308-0d34-0410-b5e6-96231b3b80d8
If interference reaches the last split point, it is effectively live out and
should be marked as 'MustSpill'.
This can make a difference when the terminator uses a register. There is no way
that register can be reused in the outgoing CFG bundle, even if it isn't live
out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124900 91177308-0d34-0410-b5e6-96231b3b80d8
We should not be attempting a region split if it won't lead to at least one
directly allocatable interval. That could cause infinite splitting loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124893 91177308-0d34-0410-b5e6-96231b3b80d8
When the live range is live through a block that doesn't use the register, but
that has interference, region splitting wants to split at the top and bottom of
the basic block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124839 91177308-0d34-0410-b5e6-96231b3b80d8
These end points come from the inserted copies, and can be passed directly to
useIntv. This simplifies the coloring code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124799 91177308-0d34-0410-b5e6-96231b3b80d8
The greedy register allocator revealed some problems with the value mapping in
SplitKit. We would sometimes start mapping values before all defs were known,
and that could change a value from a simple 1-1 mapping to a multi-def mapping
that requires ssa update.
The new approach collects all defs and register assignments first without
filling in any live intervals. Only when finish() is called, do we compute
liveness and mapped values. At this time we know with certainty which values map
to multiple values in a split range.
This also has the advantage that we can compute live ranges based on the
remaining uses after rematerializing at split points.
The current implementation has many opportunities for compile time optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124765 91177308-0d34-0410-b5e6-96231b3b80d8
The value mapping gets confused about which original values have multiple new
definitions so they may need phi insertions.
This could probably be simplified by letting enterIntvBefore() take a live range
to be added following the instruction. As long as the range stays inside the
same basic block, value mapping shouldn't be a problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123926 91177308-0d34-0410-b5e6-96231b3b80d8
interval after an instruction. The leaveIntvAfter() method only adds liveness
from the instruction's boundary index to the inserted copy.
Ideally, SplitKit should be smarter about this, perhaps by combining useIntv()
and leaveIntvAfter() into one method that guarantees continuity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123858 91177308-0d34-0410-b5e6-96231b3b80d8
Region splitting includes loop splitting as a subset, and it is more generic.
The splitting heuristics for variables that are live in more than one block are
now:
1. Try to create a region that covers multiple basic blocks.
2. Try to create a new live range for each block with multiple uses.
3. Spill.
Steps 2 and 3 are similar to what the standard spiller is doing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123853 91177308-0d34-0410-b5e6-96231b3b80d8
Analyze the live range's behavior entering and leaving basic blocks. Compute an
interference pattern for each allocation candidate, and use SpillPlacement to
find an optimal region where that register can be live.
This code is still not enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@123774 91177308-0d34-0410-b5e6-96231b3b80d8
createMachineVerifierPass and MachineFunction::verify.
The banner is printed before the machine code dump, just like the printer pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122113 91177308-0d34-0410-b5e6-96231b3b80d8
RegAllocBase::VerifyEnabled.
Run the machine code verifier in a few interesting places during RegAllocGreedy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122107 91177308-0d34-0410-b5e6-96231b3b80d8
The heuristics split around the largest loop where the current register may be
allocated without interference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122106 91177308-0d34-0410-b5e6-96231b3b80d8
live range splitting around loops guided by register pressure.
So far, trySplit() simply prints a lot of debug output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121918 91177308-0d34-0410-b5e6-96231b3b80d8