Use a dedicated MachO load command to annotate data-in-code regions.
This is the same format the linker produces for final executable images,
allowing consistency of representation and use of introspection tools
for both object and executable files.
Data-in-code regions are annotated via ".data_region"/".end_data_region"
directive pairs, with an optional region type.
data_region_directive := ".data_region" { region_type }
region_type := "jt8" | "jt16" | "jt32" | "jta32"
end_data_region_directive := ".end_data_region"
The previous handling of ARM-style "$d.*" labels was broken and has
been removed. Specifically, it didn't handle ARM vs. Thumb mode when
marking the end of the section.
rdar://11459456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157062 91177308-0d34-0410-b5e6-96231b3b80d8
file error checking. Use that to error on an unfinished cfi_startproc.
The error is not nice, but is already better than a segmentation fault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147717 91177308-0d34-0410-b5e6-96231b3b80d8
- On COFF the .lcomm directive has an alignment argument.
- On ELF we fall back to .local + .comm
Based on a patch by NAKAMURA Takumi.
Fixes PR9337, PR9483 and PR10128.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138976 91177308-0d34-0410-b5e6-96231b3b80d8
assert-path code, as previously we would have fallen off the end of the
function, but please review and let me know if this should go somewhere
else.
This fixes a Clang warning:
lib/MC/MCMachOStreamer.cpp:201:11: error: enumeration value 'MCSA_IndirectSymbol' not handled in switch [-Werror,-Wswitch-enum]
switch (Attribute) {
^
1 error generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135976 91177308-0d34-0410-b5e6-96231b3b80d8
The .local, .hidden, .internal, and .protected are not legal for all supported
file formats (in particular, they're invalid for MachO). Move the parsing for
them into the ELF assembly parser since that's the format they're for.
Similarly, .weak is used by COFF and ELF, but not MachO, so move the parsing
to the COFF and ELF asm parsers. Previously, using any of these directives
on Darwin would result in an assertion failure in the parser; now we get
a diagnostic as we should.
rdar://9827089
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135921 91177308-0d34-0410-b5e6-96231b3b80d8
TargetAsmInfo, which in turn pulls in TargetRegisterInfo, etc. :-( There are
other cases of violations, but this is probably the worst.
This patch is but one small step towards fixing this. 500 more steps to go. :-(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135131 91177308-0d34-0410-b5e6-96231b3b80d8
Currently the output should be almost identical to the one produced by CodeGen
to make the transition easier.
The only two differences I know of are:
* Some files get an extra advance loc of size 0. This will be fixed when
relaxations are enabled.
* The optimization of declaring an EH symbol as an external variable is not
implemented. This is a subset of adding the nounwind attribute, so we if really
this at -O0 we should probably do it at the IL level.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@130623 91177308-0d34-0410-b5e6-96231b3b80d8
actuall addresses in a .o file, so it is better to let the MachO writer compute
it.
This is good for two reasons. First, areas that shouldn't care about
addresses now don't have access to it. Second, the layout of each section
is independent. I should use this in a subsequent commit to speed it up.
Most of the patch is just removing the section address computation. The two
interesting parts are the change on how we handle padding in the end
of sections and how MachO can get the address of a-b when a and b are in
different sections.
Since now the expression evaluation normally doesn't know the section address,
it will think that a-b needs relocation and let the MachO writer know. Once
it has computed the section addresses, it calls back the expression evaluation
with the section addresses to resolve these expressions.
The remaining problem is the handling of padding. Currently it will create
a special alignment fragment at the end. Since that fragment doesn't update
the alignment of the section, it needs the real address to be computed.
Since now the layout will not compute a-b with a and b in different sections,
the only effect that the special alignment fragment has is update the
address size of the section. This can also be done by the MachO writer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121076 91177308-0d34-0410-b5e6-96231b3b80d8
MCStreamer instead of just MCObjectStreamer. Address changes cannot
be as efficient as we have to use DW_LNE_set_addres, but at least
most of the logic is shared.
This will be used so that, with CodeGen still using EmitDwarfLocDirective,
llvm-gcc is able to produce debug_line sections without needing an
assembler that supports .loc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119777 91177308-0d34-0410-b5e6-96231b3b80d8
Next: Add support for the !HasDotLocAndDotFile case to the MCAsmStreamer
and then switch codegen to use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119384 91177308-0d34-0410-b5e6-96231b3b80d8
where both symbols are "local", that is non-external symbols, and there is
no "base" for the symbols used in the expression, that is the section has
no non-temporary symbols. This case looks like this:
% cat local_reloc_A-B.s
.long 0
LB: .long 1
.long LA - LB - 4
.long 2
LA: .long 3
which llvm-mc will not encode without this patch, generates a "unsupported
local relocations in difference" error, but the Darwin assembler will
encode with relocation entries like this:
% otool -rv a.out l.out
a.out:
Relocation information (__TEXT,__text) 2 entries
address pcrel length extern type scattered symbolnum/value
00000008 False long False SUB False 1 (__TEXT,__text)
00000008 False long False UNSIGND False 1 (__TEXT,__text)
which is very similar to what is encoded when the symbols don't have the
leading 'L' and they are not temporary symbols. Which llvm-mc and the
Darwin assembler will encoded like this:
Relocation information (__TEXT,__text) 2 entries
address pcrel length extern type scattered symbolnum/value
00000008 False long True SUB False B
00000008 False long True UNSIGND False A
This is the missing relocation encoding needed to allow the Mach-O x86
Dwarf file and line table to be emitted. So this patch also removes the
TODO from the if() statement in MCMachOStreamer::Finish() that didn't
call MCDwarfFileTable::Emit() for 64-bit targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115389 91177308-0d34-0410-b5e6-96231b3b80d8
and output the dwarf line number tables. This contains the code to emit and
encode the dwarf line tables from the previously gathered information in the
MCLineSection objects. This contains all the details to encode the line and
address deltas into the dwarf line table.
To do this an MCDwarfLineAddrFragment has been added.
Also this moves the interface code out of Mach-O streamer into
MCDwarf so it should be useable by other object file formats.
There is now one call to be made from an MCObjectStreamer
EmitInstruction() method:
MCLineEntry::Make(this, getCurrentSection());
to create a line entry after each instruction is assembled.
And one call call to be made from an MCObjectStreamer Finish() method:
MCDwarfFileTable::Emit(this, DwarfLineSection);
when getContext().hasDwarfFiles() is true and is passed a object file specific
MCSection where to emit the dwarf file and the line tables.
This appears to now be correct for 32-bit targets, at least x86. But the
relocation entries for 64-bit Darwin needs some further work which is next
up to work on. So for now the 64-bit Mach-O target does not output the
dwarf file and line tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115157 91177308-0d34-0410-b5e6-96231b3b80d8
