Also update the documentation since Sparc is the nicest backend, and
used as an example in WritingAnLLVMBackend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177835 91177308-0d34-0410-b5e6-96231b3b80d8
The new wording cannot be construed as suggesting the use of
SmallVectorImpl<T> as e.g. a class member (just because the class
happens to be in an interface).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177778 91177308-0d34-0410-b5e6-96231b3b80d8
of complex instruction operands (e.g. address modes).
Currently, if a Pat pattern creates an instruction that has a complex
operand (i.e. one that consists of multiple sub-operands at the MI
level), this operand must match a ComplexPattern DAG pattern with the
correct number of output operands.
This commit extends TableGen to alternatively allow match a complex
operands against multiple separate operands at the DAG level.
This allows using Pat patterns to match pre-increment nodes like
pre_store (which must have separate operands at the DAG level) onto
an instruction pattern that uses a multi-operand memory operand,
like the following example on PowerPC (will be committed as a
follow-on patch):
def STWU : DForm_1<37, (outs ptr_rc:$ea_res), (ins GPRC:$rS, memri:$dst),
"stwu $rS, $dst", LdStStoreUpd, []>,
RegConstraint<"$dst.reg = $ea_res">, NoEncode<"$ea_res">;
def : Pat<(pre_store GPRC:$rS, ptr_rc:$ptrreg, iaddroff:$ptroff),
(STWU GPRC:$rS, iaddroff:$ptroff, ptr_rc:$ptrreg)>;
Here, the pair of "ptroff" and "ptrreg" operands is matched onto the
complex operand "dst" of class "memri" in the "STWU" instruction.
Approved by Jakob Stoklund Olesen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177428 91177308-0d34-0410-b5e6-96231b3b80d8
These are two related changes (one in llvm, one in clang).
LLVM:
- rename address_safety => sanitize_address (the enum value is the same, so we preserve binary compatibility with old bitcode)
- rename thread_safety => sanitize_thread
- rename no_uninitialized_checks -> sanitize_memory
CLANG:
- add __attribute__((no_sanitize_address)) as a synonym for __attribute__((no_address_safety_analysis))
- add __attribute__((no_sanitize_thread))
- add __attribute__((no_sanitize_memory))
for S in address thread memory
If -fsanitize=S is present and __attribute__((no_sanitize_S)) is not
set llvm attribute sanitize_S
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176075 91177308-0d34-0410-b5e6-96231b3b80d8
The 'nobuiltin' attribute is applied to call sites to indicate that LLVM should
not treat the callee function as a built-in function. I.e., it shouldn't try to
replace that function with different code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175835 91177308-0d34-0410-b5e6-96231b3b80d8
This is based on Bill Wendling's email. No additional content has been added,
but now there's a place for Attributes to capture future information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174961 91177308-0d34-0410-b5e6-96231b3b80d8
This updates the current references to links that work for me.
In the future, we should update the list of references itself to provide
information on newer architecture variants.
Thanks to Sean Silva for pointing out that the current links were broken!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174739 91177308-0d34-0410-b5e6-96231b3b80d8
Attribute groups are of the form:
#0 = attributes { noinline "no-sse" "cpu"="cortex-a8" alignstack=4 }
Target-dependent attributes are represented as strings. Attributes can have
optional values associated with them. E.g., the "cpu" attribute has the value
"cortex-a8".
Target-independent attributes are listed as enums inside the attribute classes.
Multiple attribute groups can be referenced by the same object. In that case,
the attributes are merged together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174493 91177308-0d34-0410-b5e6-96231b3b80d8
definition
Current practice is not to use 'inline' in:
class Foo {
public:
inline void bar() {
// ...
}
};
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174317 91177308-0d34-0410-b5e6-96231b3b80d8
Makefile.config.
This is implied at the bottom of the help text of configure (besides
CC/CXX/LDFLAGS, already passed to Makefile.config).
For backward compatibility, the values of CFLAGS and CXXFLAGS defaults
to empty, overriding the default values provided by autoconf (for
example, '-g -O2' when CC=gcc').
$(CPP) is not used by our makefiles. Therefore, the value of CPP is
not passed to Makefile.config, despite beeing mentioned by 'configure
--help'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174313 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalVariable about LLVM's assumptions vis-a-vis Global Variable
initial values and Global Variable initializers.
This is in preparation for adding the new keyword
externally_initialized.
Specifically, the patch explains how LLVM optimizes global initializers
by assumign that global variables defined within the module are not
modified from their initial values before the start of the global
initializer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174269 91177308-0d34-0410-b5e6-96231b3b80d8
My "excuse" for not refactoring the grammar here is to not diverge too
far from the grammar in the comments of TGParser.cpp, since I'm not
taking on the quest of majorly refactoring TGParser.cpp at the moment.
One benefit of doing this is that Ideas for refactoring and clarifying
the grammar in this document should translate almost immediately to
beneficial refactorings that can be made to TGParser.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174144 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for AArch64 (ARM's 64-bit architecture) to
LLVM in the "experimental" category. Currently, it won't be built
unless requested explicitly.
This initial commit should have support for:
+ Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions
(except the late addition CRC instructions).
+ CodeGen features required for C++03 and C99.
+ Compilation for the "small" memory model: code+static data <
4GB.
+ Absolute and position-independent code.
+ GNU-style (i.e. "__thread") TLS.
+ Debugging information.
The principal omission, currently, is performance tuning.
This patch excludes the NEON support also reviewed due to an outbreak of
batshit insanity in our legal department. That will be committed soon bringing
the changes to precisely what has been approved.
Further reviews would be gratefully received.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174054 91177308-0d34-0410-b5e6-96231b3b80d8
prevent an llvm developer from mistakenly thinking that just because the
intrinsic has volatile flags that volatile operations can be converted
to or folded into them.
Platforms may rely on volatile loads and stores of natively supported
data width to be executed as single instruction. When compiling
C, this expectation likely holds for l-values of volatile primitive
types with native hardware support, but not necessarily for aggregate
types. The frontend upholds these expectations, which are not
specified in the IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173974 91177308-0d34-0410-b5e6-96231b3b80d8
Boilerplate is often the hardest part of getting started with these
kinds of things, so throw them a bone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173969 91177308-0d34-0410-b5e6-96231b3b80d8
custom git script called git-svnup which handles all of the work of
using the git-mirrors/keeping the git-svn numbers in sync.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173472 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an !add(a, b) operator to tablegen; this will be used
to cleanup the PPC register definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173445 91177308-0d34-0410-b5e6-96231b3b80d8
The requirements of the strong heuristic are:
* A Protector is required for functions which contain an array, regardless of
type or length.
* A Protector is required for functions which contain a structure/union which
contains an array, regardless of type or length. Note, there is no limit to
the depth of nesting.
* A protector is required when the address of a local variable (i.e., stack
based variable) is exposed. (E.g., such as through a local whose address is
taken as part of the RHS of an assignment or a local whose address is taken as
part of a function argument.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173231 91177308-0d34-0410-b5e6-96231b3b80d8
SSPStrong applies a heuristic to insert stack protectors in these situations:
* A Protector is required for functions which contain an array, regardless of
type or length.
* A Protector is required for functions which contain a structure/union which
contains an array, regardless of type or length. Note, there is no limit to
the depth of nesting.
* A protector is required when the address of a local variable (i.e., stack
based variable) is exposed. (E.g., such as through a local whose address is
taken as part of the RHS of an assignment or a local whose address is taken as
part of a function argument.)
This patch implements the SSPString attribute to be equivalent to
SSPRequired. This will change in a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173230 91177308-0d34-0410-b5e6-96231b3b80d8
This change also removes a bunch of boilerplate and stuffing which made
it unnecessarily hard to navigate and see the comparatively miniscule
actual content that was added to this document during the 3.2
development period (or maybe even sticking around from earlier
releases...).
The new organization (a flat list) optimizes for making it easy for
people who know about changes to add them to the document. It's
completely trivial for anyone with basic knowledge of LLVM to come in
later (such as when preparing for the actual release) and cluster any
changes into logical groups. However, I have left some comments
indicating how to add larger descriptions, if someone is feeling
adventurous ;)
Hopefully this organization will highlight how little effort is being
put into producing accurate, high-quality release notes, prompting a
corresponding improvement for the 3.3 release.
I have preserved the changes to this document that are not present
in the 3.2 release notes. There were only two... I'm pretty sure we've
been busier than that... (version control shows +213347/-173656 raw
lines just in the LLVM repo since the 3.2 release).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172954 91177308-0d34-0410-b5e6-96231b3b80d8
This brings back {Ctrl,Cmd}-f'ability, and makes some really bad
organizational choices easier to see (and therefore fix).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172949 91177308-0d34-0410-b5e6-96231b3b80d8
grep is now only mentioned once in a sentence that explicitly says it's
deprecated. For FileCheck, there's no reason to repeat part of the
documentation that exists in CommandGuide/FileCheck.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172835 91177308-0d34-0410-b5e6-96231b3b80d8
- This code is dead, and the "right" way to get this support is to use the
platform-specific linker-integrated LTO mechanisms, or the forthcoming LLVM
linker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172749 91177308-0d34-0410-b5e6-96231b3b80d8
