enhancement done the trivial way; by extending inputs and truncating outputs
which is addequate for targets with little or no support for integer arithmetic
on integer types less than 32 bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176139 91177308-0d34-0410-b5e6-96231b3b80d8
The 'nobuiltin' attribute is applied to call sites to indicate that LLVM should
not treat the callee function as a built-in function. I.e., it shouldn't try to
replace that function with different code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175835 91177308-0d34-0410-b5e6-96231b3b80d8
isn't using the default calling convention. However, if the transformation is
from a call to inline IR, then the calling convention doesn't matter.
rdar://13157990
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174724 91177308-0d34-0410-b5e6-96231b3b80d8
This is a re-worked version of r174048.
Given source IR:
call void @llvm.dbg.declare(metadata !{i32* %argc.addr}, metadata !14), !dbg !15
we used to generate
call void @llvm.dbg.declare(metadata !27, metadata !28), !dbg !29!27 = metadata !{null}
With this patch, we will correctly generate
call void @llvm.dbg.declare(metadata !{i32* %argc.addr}, metadata !27), !dbg !28
Looking up %argc.addr in ValueMap will return null, since %argc.addr is already
correctly set up, we can use identity mapping.
rdar://problem/13089880
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174093 91177308-0d34-0410-b5e6-96231b3b80d8
Given source IR:
call void @llvm.dbg.declare(metadata !{i32* %argc.addr}, metadata !14), !dbg !15
we used to generate
call void @llvm.dbg.declare(metadata !27, metadata !28), !dbg !29!27 = metadata !{null}
With this patch, we will correctly generate
call void @llvm.dbg.declare(metadata !{i32* %argc.addr}, metadata !27), !dbg !28
Looking up %argc.addr in ValueMap will return null, since %argc.addr is already
correctly set up, we can use identity mapping.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173946 91177308-0d34-0410-b5e6-96231b3b80d8
loops over instructions in the basic block or the use-def list of the
value, neither of which are really efficient when repeatedly querying
about values in the same basic block.
What's more, we already know that the CondBB is small, and so we can do
a much more efficient test by counting the uses in CondBB, and seeing if
those account for all of the uses.
Finally, we shouldn't blanket fail on any such instruction, instead we
should conservatively assume that those instructions are part of the
cost.
Note that this actually fixes a bug in the pass because
isUsedInBasicBlock has a really terrible bug in it. I'll fix that in my
next commit, but the fix for it would make this code suddenly take the
compile time hit I thought it already was taking, so I wanted to go
ahead and migrate this code to a faster & better pattern.
The bug in isUsedInBasicBlock was also causing other tests to test the
wrong thing entirely: for example we weren't actually disabling
speculation for floating point operations as intended (and tested), but
the test passed because we failed to speculate them due to the
isUsedInBasicBlock failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173417 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
Plug TTI into the speculation logic, giving it a real cost interface
that can be specialized by targets.
The goal here is not to be more aggressive, but to just be more accurate
with very obvious cases. There are instructions which are known to be
truly free and which were not being modeled as such in this code -- see
the regression test which is distilled from an inner loop of zlib.
Everywhere the TTI cost model is insufficiently conservative I've added
explicit checks with FIXME comments to go add proper modelling of these
cost factors.
If this causes regressions, the likely solution is to make TTI even more
conservative in its cost estimates, but test cases will help here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173357 91177308-0d34-0410-b5e6-96231b3b80d8
that can be specialized by targets.
The goal here is not to be more aggressive, but to just be more accurate
with very obvious cases. There are instructions which are known to be
truly free and which were not being modeled as such in this code -- see
the regression test which is distilled from an inner loop of zlib.
Everywhere the TTI cost model is insufficiently conservative I've added
explicit checks with FIXME comments to go add proper modelling of these
cost factors.
If this causes regressions, the likely solution is to make TTI even more
conservative in its cost estimates, but test cases will help here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173342 91177308-0d34-0410-b5e6-96231b3b80d8
a cost fuction that seems both a bit ad-hoc and also poorly suited to
evaluating constant expressions.
Notably, it is missing any support for trivial expressions such as
'inttoptr'. I could fix this routine, but it isn't clear to me all of
the constraints its other users are operating under.
The core protection that seems relevant here is avoiding the formation
of a select instruction wich a further chain of select operations in
a constant expression operand. Just explicitly encode that constraint.
Also, update the comments and organization here to make it clear where
this needs to go -- this should be driven off of real cost measurements
which take into account the number of constants expressions and the
depth of the constant expression tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173340 91177308-0d34-0410-b5e6-96231b3b80d8
terms of cost rather than hoisting a single instruction.
This does *not* change the cost model! We still set the cost threshold
at 1 here, it's just that we track it by accumulating cost rather than
by storing an instruction.
The primary advantage is that we no longer leave no-op intrinsics in the
basic block. For example, this will now move both debug info intrinsics
and a single instruction, instead of only moving the instruction and
leaving a basic block with nothing bug debug info intrinsics in it, and
those intrinsics now no longer ordered correctly with the hoisted value.
Instead, we now splice the entire conditional basic block's instruction
sequence.
This also places the code for checking the safety of hoisting next to
the code computing the cost.
Currently, the only observable side-effect of this change is that debug
info intrinsics are no longer abandoned. I'm not sure how to craft
a test case for this, and my real goal was the refactoring, but I'll
talk to Dave or Eric about how to add a test case for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173339 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, the code would scan the PHI nodes and build up a small
setvector of candidate value pairs in phi nodes to go and rewrite. Once
certain the rewrite could be performed, the code walks the set, and for
each one re-scans the entire PHI node list looking for nodes to rewrite
operands.
Instead, scan the PHI nodes once to check for hazards, and then scan it
a second time to rewrite the operands to selects. No set vector, and
a max of two scans.
The only downside is that we might form identical selects, but
instcombine or anything else should fold those easily, and it seems
unlikely to happen often.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173337 91177308-0d34-0410-b5e6-96231b3b80d8
pretty in doxygen, adding some of the details actually present in
a classic example where this matters (a loop from gzip and many other
compression algorithms), and a cautionary note about the risks inherent
in the transform. This has come up on the mailing lists recently, and
I suspect folks reading this code could benefit from going and looking
at the MI pass that can really deal with these issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173329 91177308-0d34-0410-b5e6-96231b3b80d8
used uninitialized, since it fails to understand that Array is only used when
SingleValue is not, and outputs a warning. It also seems generally safer given
that the constructor is non-trivial and has plenty of early exits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173242 91177308-0d34-0410-b5e6-96231b3b80d8
Collections of attributes are handled via the AttributeSet class now. This
finally frees us up to make significant changes to how attributes are structured.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173228 91177308-0d34-0410-b5e6-96231b3b80d8
Further encapsulation of the Attribute object. Don't allow direct access to the
Attribute object as an aggregate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172853 91177308-0d34-0410-b5e6-96231b3b80d8
Because the Attribute class is going to stop representing a collection of
attributes, limit the use of it as an aggregate in favor of using AttributeSet.
This replaces some of the uses for querying the function attributes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172844 91177308-0d34-0410-b5e6-96231b3b80d8
through as a reference rather than a pointer. There is always *some*
implementation of this available, so this simplifies code by not having
to test for whether it is available or not.
Further, it turns out there were piles of places where SimplifyCFG was
recursing and not passing down either TD or TTI. These are fixed to be
more pedantically consistent even though I don't have any particular
cases where it would matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171691 91177308-0d34-0410-b5e6-96231b3b80d8
next to its only user. This helper relies on TargetLowering information
that shouldn't be generally used throughout the Transfoms library, and
so it made little sense as a generic utility.
This also consolidates the file where we need to remove the remaining
uses of TargetLowering in favor of the IR-layer abstract interface in
TargetTransformInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171590 91177308-0d34-0410-b5e6-96231b3b80d8
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
utils/sort_includes.py script.
Most of these are updating the new R600 target and fixing up a few
regressions that have creeped in since the last time I sorted the
includes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171362 91177308-0d34-0410-b5e6-96231b3b80d8
When ASan replaces <alloca instruction> with
<offset into a common large alloca>, it should also patch
llvm.dbg.declare calls and replace debug info descriptors to mark
that we've replaced alloca with a value that stores an address
of the user variable, not the user variable itself.
See PR11818 for more context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169984 91177308-0d34-0410-b5e6-96231b3b80d8
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
We're iterating over a non-deterministically ordered container looking
for two saturating flags. To do this correctly, we have to saturate
both, and only stop looping if both saturate to their final value.
Otherwise, which flag we see first changes the result.
This is also a micro-optimization of the previous version as now we
don't go into the (possibly expensive) test logic once the first
violation of either constraint is detected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168989 91177308-0d34-0410-b5e6-96231b3b80d8
functionality changed.
Evan's commit r168970 moved the code that the primary comment in this
function referred to to the other end of the function without moving the
comment, and there has been a steady creep of "boolean" logic in it that
is simpler if handled via early exit. That way each special case can
have its own comments. I've also made the variable name a bit more
explanatory than "AllFit". This is in preparation to fix the
non-deterministic output of this function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168988 91177308-0d34-0410-b5e6-96231b3b80d8
