Summary:
No functional change yet, it's just an object replacement for an enum.
It will allow us to gather ABI information in a single place so that we can
start testing for properties of the ABI's instead of the ABI itself.
For example we will eventually be able to use:
ABI.MinStackAlignmentInBytes()
instead of:
(isABI_N32() || isABI_N64()) ? 16 : 8
which is clearer and more maintainable.
Reviewers: matheusalmeida
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220568 91177308-0d34-0410-b5e6-96231b3b80d8
This works because uuid's are always little endian so it's not swapped.
Fixes use-after-return reported by asan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220567 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Most structs were fixed by r218451 but those of between >32-bits and
<64-bits remained broken since they were not marked with [ASZ]ExtUpper.
This patch fixes the remaining cases by using
CCPromoteToUpperBitsInType<i64> on i64's in addition to i32 and smaller.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220556 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a miscompilation in the AArch64 fast-isel which was
triggered when a branch is based on an icmp with condition eq or ne,
and type i1, i8 or i16. The cbz instruction compares the whole 32-bit
register, so values with the bottom 1, 8 or 16 bits clear would cause
the wrong branch to be taken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220553 91177308-0d34-0410-b5e6-96231b3b80d8
This is asm/diasm-only support, similar to AVX.
For ISeling the register variant, they are no different from 213 other than
whether the multiplication or the addition operand is destructed.
For ISeling the memory variant, i.e. to fold a load, they are no different
than the 132 variant. The addition operand (op3) in both cases can come from
memory. Again the ony difference is which operand is destructed.
There could be a post-RA pass that would convert a 213 or 132 into a 231.
Part of <rdar://problem/17082571>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220540 91177308-0d34-0410-b5e6-96231b3b80d8
This multiclass generates the different forms: 213, 231, 132 in AVX.
132 in AVX512 is a separate class but I am planning to use this same
multiclass to generate 231 relying on the nice the null_frag trick from AVX to
disable codegen pattern for 231.
No functionality change, no change in X86.td.expanded except for the different
instruction definition names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220539 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for legalization of instructions of the form:
[fp_conv] <1 x i1> %op to <1 x double>
where fp_conv is one of fpto[us]i, [us]itofp. This used to assert
because they were simply missing from the vector operand scalarizer.
A similar problem arose in r190830, with trunc instead.
Fixes PR20778.
Differential Revision: http://reviews.llvm.org/D5810
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220533 91177308-0d34-0410-b5e6-96231b3b80d8
x86's CMPXCHG -> EFLAGS consumer wasn't being recorded as a real EFLAGS
dependency because it was represented by a pair of CopyFromReg(EFLAGS) ->
CopyToReg(EFLAGS) nodes. ScheduleDAG was expecting the source to be an
implicit-def on the instruction, where the result numbers in the DAG and the
Uses list in TableGen matched up precisely.
The Copy notation seems much more robust, so this patch extends ScheduleDAG
rather than refactoring x86.
Should fix PR20376.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220529 91177308-0d34-0410-b5e6-96231b3b80d8
While refactoring this code I was confused by both the name I had
introduced (addNonArgumentVariable... but it has all this logic to
handle argument numbering and keep things in order?) and by the
redundancy. Seems when I fixed the misordered inlined argument handling,
I didn't realize it was mostly redundant with the argument ordering code
(which I may've also written, I'm not sure). So let's just rely on the
more general case.
The only oddity in output this produces is that it means when we emit
all the variables for the current function, we don't track when we've
finished the argument variables and are about to start the local
variables and insert DW_AT_unspecified_parameters (for varargs
functions) there. Instead it ends up after the local variables, scopes,
etc. But this isn't invalid and doesn't cause DWARF consumers problems
that I know of... so we'll just go with that because it makes the code
nice & simple.
(though, let's see what the buildbots have to say about this - *crosses
fingers*)
There will be some cleanup commits to follow to remove the now trivial
wrappers, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220527 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, @llvm.smul.with.overflow.i8 expands to 9 instructions, where
3 are really needed.
This adds X86ISD::UMUL8/SMUL8 SD nodes, and custom lowers them to
MUL8/IMUL8 + SETO.
i8 is a special case because there is no two/three operand variants of
(I)MUL8, so the first operand and return value need to go in AL/AX.
Also, we can't write patterns for these instructions: TableGen refuses
patterns where output operands don't match SDNode results. In this case,
instructions where the output operand is an implicitly defined register.
A related special case (and FIXME) exists for MUL8 (X86InstrArith.td):
// FIXME: Used for 8-bit mul, ignore result upper 8 bits.
// This probably ought to be moved to a def : Pat<> if the
// syntax can be accepted.
[(set AL, (mul AL, GR8:$src)), (implicit EFLAGS)]
Ideally, these go away with UMUL8, but we still need to improve TableGen
support of implicit operands in patterns.
Before this change:
movsbl %sil, %eax
movsbl %dil, %ecx
imull %eax, %ecx
movb %cl, %al
sarb $7, %al
movzbl %al, %eax
movzbl %ch, %esi
cmpl %eax, %esi
setne %al
After:
movb %dil, %al
imulb %sil
seto %al
Also, remove a made-redundant testcase for PR19858, and enable more FastISel
ALU-overflow tests for SelectionDAG too.
Differential Revision: http://reviews.llvm.org/D5809
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220516 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes a chunk of special case logic for folding
(float)sqrt((double)x) -> sqrtf(x)
in InstCombineCasts and handles it in the mainstream path of SimplifyLibCalls.
No functional change intended, but I loosened the restriction on the existing
sqrt testcases to allow for this optimization even without unsafe-fp-math because
that's the existing behavior.
I also added a missing test case for not shrinking the llvm.sqrt.f64 intrinsic
in case the result is used as a double.
Differential Revision: http://reviews.llvm.org/D5919
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220514 91177308-0d34-0410-b5e6-96231b3b80d8
* Read modules lazily
* Don't treat the first file specially, instead merge all inputs into an empty
module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220501 91177308-0d34-0410-b5e6-96231b3b80d8
This prints disassembly comments for Objective-C references to CFStrings,
Selectors, Classes and method calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220500 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a bug (introduced by fixing the IR emitted from Clang where
the definition of a static member would be scoped within the class,
rather than within its lexical decl context) where the definition of a
static variable would be placed inside a class.
It also improves source fidelity by scoping static class member
definitions inside the lexical decl context in which tehy are written
(eg: namespace n { class foo { static int i; } int foo::i; } - the
definition of 'i' will be within the namespace 'n' in the DWARF output
now).
Lastly, and the original goal, this reduces debug info size slightly
(and makes debug info easier to read, etc) by placing the definitions of
non-member global variables within their namespace, rather than using a
separate namespace-scoped declaration along with a definition at global
scope.
Based on patches and discussion with Frédéric.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220497 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r214981.
I'm not sure what I was thinking when I wrote this. Testing with MSVC
shows that this function is mangled to '@f@8':
int __fastcall f(int a, int b);
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220492 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds a new CMake build setting LLVM_BUILD_LLVM_DYLIB, which defaults to OFF. When set to ON, this will generate a shared library containing most of LLVM. The contents of the shared library can be overriden by specifying LLVM_DYLIB_COMPONENTS. LLVM_DYLIB_COMPONENTS can be set to a semi-colon delimited list of any LLVM components that you llvm-config can resolve.
On Windows, unless you are using Cygwin, you must specify an explicit symbol export file using LLVM_EXPORTED_SYMBOL_FILE. On Cygwin and all unix-like platforms if you do not specify LLVM_EXPORTED_SYMBOL_FILE, an export file containing only the LLVM C API will be auto-generated from the list of LLVM components specified in LLVM_DYLIB_COMPONENTS.
Reviewers: rnk
Reviewed By: rnk
Subscribers: rnk, llvm-commits
Differential Revision: http://reviews.llvm.org/D5890
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220490 91177308-0d34-0410-b5e6-96231b3b80d8
This updates check for double precision zero floating point constant to allow
use of instruction with immediate value rather than temporary register.
Currently "a == 0.0", where "a" is of "double" type generates:
vmov.i32 d16, #0x0
vcmpe.f64 d0, d16
With this change it becomes:
vcmpe.f64 d0, #0
Patch by Sergey Dmitrouk.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@220486 91177308-0d34-0410-b5e6-96231b3b80d8
