Per the October 12, 2012 Proposal for annotated disassembly output sent out by
Jim Grosbach this set of changes implements this for X86 and arm. The llvm-mc
tool now has a -mdis option to produced the marked up disassembly and a couple
of small example test cases have been added.
rdar://11764962
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166445 91177308-0d34-0410-b5e6-96231b3b80d8
a memory operand. Retain this information and then add the sizing directives
to the IR. This allows the backend to do proper instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166316 91177308-0d34-0410-b5e6-96231b3b80d8
*NamedDecl. In turn, build the expressions after we're finished parsing the
asm. This avoids a crasher if the lookup fails.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166212 91177308-0d34-0410-b5e6-96231b3b80d8
layer. Add the ParseMSInlineAsm() function, which is the new interface to
clang. Also expose the new MCAsmParserSemaCallback interface, which is used
by the back-end to do name lookup in Sema. Finally, remove the now defunct
APIs introduced in r165946.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166183 91177308-0d34-0410-b5e6-96231b3b80d8
inline assembly. For the time being, these will be called directly by clang.
However, in the near future I expect these to be sunk back into the MC layer
and more basic APIs (e.g., getClobbers(), getConstraints(), etc.) will be called
by clang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165946 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces the EmitRawText by a EmitTCEntry class (specialized for
each Streamer) in PowerPC64 TOC entry creation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165940 91177308-0d34-0410-b5e6-96231b3b80d8
the interface between the front-end and the MC layer when parsing inline
assembly. Unfortunately, this is too deep into the parsing stack. Specifically,
we're unable to handle target-independent assembly (i.e., assembly directives,
labels, etc.). Note the MatchAndEmitInstruction() isn't the correct
abstraction either. I'll be exposing target-independent hooks shortly, so this
is really just a cleanup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165858 91177308-0d34-0410-b5e6-96231b3b80d8
This adds 'elf' as a recognized target triple environment value and overrides the default generated object format on Windows platforms if that value is present. This patch also enables MCJIT tests on Windows using the new environment value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165030 91177308-0d34-0410-b5e6-96231b3b80d8
The target backend can support data-in-code load commands even when
the assembler doesn't, or vice-versa. Allow targets to opt-in for
direct-to-object.
PR13973.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164974 91177308-0d34-0410-b5e6-96231b3b80d8
Reduces runtime of i386-large-relocations.s by 10x in Release builds, even more
in Debug+Asserts builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164945 91177308-0d34-0410-b5e6-96231b3b80d8
to improve compatibility with GNU as.
Based on a patch by PaX Team.
Fixed assertion failures on non-Darwin and added additional test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164248 91177308-0d34-0410-b5e6-96231b3b80d8
Now where we used to call ReInitMCSubtargetInfo, we actually recompute
the same information as InitMCSubtargetInfo instead of only setting
the feature bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164105 91177308-0d34-0410-b5e6-96231b3b80d8
* wrap code blocks in \code ... \endcode;
* refer to parameter names in paragraphs correctly (\arg is not what most
people want -- it starts a new paragraph);
* use \param instead of \arg to document parameters in order to be consistent
with the rest of the codebase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163902 91177308-0d34-0410-b5e6-96231b3b80d8
.set a, b - c + CONSTANT
d = b - c + CONSTANT
Both 'a' and 'd' should be marked as absolute symbols (N_ABS).
rdar://12219394
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163853 91177308-0d34-0410-b5e6-96231b3b80d8
Apparently, NumSubRegIndices was completely unused before. Adjust it by
one to include the null subreg index, just like getNumRegs() includes
the null register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163628 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason .lcomm uses byte alignment and .comm log2 alignment so we can't
use the same setting for both. Fix this by reintroducing the LCOMM enum.
I verified this against mingw's gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163420 91177308-0d34-0410-b5e6-96231b3b80d8
- Darwin lied about not supporting .lcomm and turned it into zerofill in the
asm parser. Push the zerofill-conversion down into macho-specific code.
- This makes the tri-state LCOMMType enum superfluous, there are no targets
without .lcomm.
- Do proper error reporting when trying to use .lcomm with alignment on a target
that doesn't support it.
- .comm and .lcomm alignment was parsed in bytes on COFF, should be power of 2.
- Fixes PR13755 (.lcomm crashes on ELF).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163395 91177308-0d34-0410-b5e6-96231b3b80d8
within the codegen EK_GPRel64BlockAddress. This was not
supported for direct object output and resulted in an assertion.
This change adds support for EK_GPRel64BlockAddress for
direct object.
One fallout from this is to turn on rela relocations
for mips64 to match gas.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162334 91177308-0d34-0410-b5e6-96231b3b80d8
consistent with the other "expected identifier" errors.
Extracted from the Andy/PaX patch. I added the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162291 91177308-0d34-0410-b5e6-96231b3b80d8
There are situations where inline ASM may want to change the section -- for
instance, to create a variable in the .data section. However, it cannot do this
without (potentially) restoring to the wrong section. E.g.:
asm volatile (".section __DATA, __data\n\t"
".globl _fnord\n\t"
"_fnord: .quad 1f\n\t"
".text\n\t"
"1:" :::);
This may be wrong if this is inlined into a function that has a "section"
attribute. The user should use `.pushsection' and `.popsection' here instead.
The addition of `.previous' is added for completeness.
<rdar://problem/12048387>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161477 91177308-0d34-0410-b5e6-96231b3b80d8
Empty macro arguments at the end of the list should be as-if not specified at
all, but those in the middle of the list need to be kept so as not to screw
up the positional numbering. E.g.:
.macro foo
foo_-bash___:
nop
.endm
foo 1, 2, 3, 4
foo 1, , 3, 4
Should create two labels, "foo_1_2_3_4" and "foo_1__3_4".
rdar://11948769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161002 91177308-0d34-0410-b5e6-96231b3b80d8
subtarget CPU descriptions and support new features of
MachineScheduler.
MachineModel has three categories of data:
1) Basic properties for coarse grained instruction cost model.
2) Scheduler Read/Write resources for simple per-opcode and operand cost model (TBD).
3) Instruction itineraties for detailed per-cycle reservation tables.
These will all live side-by-side. Any subtarget can use any
combination of them. Instruction itineraries will not change in the
near term. In the long run, I expect them to only be relevant for
in-order VLIW machines that have complex contraints and require a
precise scheduling/bundling model. Once itineraries are only actively
used by VLIW-ish targets, they could be replaced by something more
appropriate for those targets.
This tablegen backend rewrite sets things up for introducing
MachineModel type #2: per opcode/operand cost model.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159891 91177308-0d34-0410-b5e6-96231b3b80d8
which many Mips 64 ABIs use than for O64 which many
if not all other target ABIs use.
Most architectures have the following 64 bit relocation record format:
typedef struct
{
Elf64_Addr r_offset; /* Address of reference */
Elf64_Xword r_info; /* Symbol index and type of relocation */
} Elf64_Rel;
typedef struct
{
Elf64_Addr r_offset;
Elf64_Xword r_info;
Elf64_Sxword r_addend;
} Elf64_Rela;
Whereas N64 has the following format:
typedef struct
{
Elf64_Addr r_offset;/* Address of reference */
Elf64_Word r_sym; /* Symbol index */
Elf64_Byte r_ssym; /* Special symbol */
Elf64_Byte r_type3; /* Relocation type */
Elf64_Byte r_type2; /* Relocation type */
Elf64_Byte r_type; /* Relocation type */
} Elf64_Rel;
typedef struct
{
Elf64_Addr r_offset;/* Address of reference */
Elf64_Word r_sym; /* Symbol index */
Elf64_Byte r_ssym; /* Special symbol */
Elf64_Byte r_type3; /* Relocation type */
Elf64_Byte r_type2; /* Relocation type */
Elf64_Byte r_type; /* Relocation type */
Elf64_Sxword r_addend;
} Elf64_Rela;
The structure is the same size, but the r_info data element
is now 5 separate elements. Besides the content aspects,
endian byte reordering will be different for the area with
each element being endianized separately.
I treat this as generic and continue to pass r_type as
an integer masking and unmasking the byte sized N64
values for N64 mode. I've implemented this and it causes no
affect on other current targets.
This passes make check.
Jack
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159299 91177308-0d34-0410-b5e6-96231b3b80d8
Patch extracted from a larger one by the PaX team. I added the testcases
and tightened error handling a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158523 91177308-0d34-0410-b5e6-96231b3b80d8
This allows a subtarget to explicitly specify the issue width and
other properties without providing pipeline stage details for every
instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157979 91177308-0d34-0410-b5e6-96231b3b80d8
Use a dedicated MachO load command to annotate data-in-code regions.
This is the same format the linker produces for final executable images,
allowing consistency of representation and use of introspection tools
for both object and executable files.
Data-in-code regions are annotated via ".data_region"/".end_data_region"
directive pairs, with an optional region type.
data_region_directive := ".data_region" { region_type }
region_type := "jt8" | "jt16" | "jt32" | "jta32"
end_data_region_directive := ".end_data_region"
The previous handling of ARM-style "$d.*" labels was broken and has
been removed. Specifically, it didn't handle ARM vs. Thumb mode when
marking the end of the section.
rdar://11459456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@157062 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, an unsupported/unknown assembler directive issued a warning.
That's generally unsafe, and inconsistent with the behaviour of pretty
much every system assembler. Now that the MC assemblers are mature
enough to be the default on multiple targets, it's reasonable to
issue errors for these.
For target or platform directives that need to stay warnings, we
should add explicit handlers for them in, e.g., ELFAsmParser.cpp,
DarwinAsmParser.cpp, et. al., and issue the warning there.
rdar://9246275
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155926 91177308-0d34-0410-b5e6-96231b3b80d8
The caller is already responsible for eating any additional input on the
line. Putting an additional EatToEndOfStatement() in ParseStatement()
causes an entire extra statement to be consumed when treating warnings
as errors. For example, test/MC/macros.s will assert() because the
.endmacro directive is missed as a result.
rdar://11355843
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155925 91177308-0d34-0410-b5e6-96231b3b80d8
A trailing comma means no argument at all (i.e., as if the comma were not
present), not an empty argument to the invokee.
rdar://11252521
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154863 91177308-0d34-0410-b5e6-96231b3b80d8
by default.
This is a behaviour configurable in the MCAsmInfo. I've decided to turn
it on by default in (possibly optimistic) hopes that most assemblers are
reasonably sane. If this proves a problem, switching to default seems
reasonable.
I'm not sure if this is the opportune place to test, but it seemed good
to make sure it was tested somewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154235 91177308-0d34-0410-b5e6-96231b3b80d8
disassembler requires a MCSubtargetInfo and a
MCInstrInfo to exist in order to initialize the
instruction printer and disassembler; however,
although the printer and disassembler keep
references to these objects they do not own them.
Previously, the MCSubtargetInfo and MCInstrInfo
objects were just leaked.
I have extended LLVMDisasmContext to own these
objects and delete them when it is destroyed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154192 91177308-0d34-0410-b5e6-96231b3b80d8
This needs a test, but it will take some time to figure
out the best way to get an input that will produce > 2^16 relocs.
Patch by Graydon Hoare!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152787 91177308-0d34-0410-b5e6-96231b3b80d8
debug info for assembly files. We were already doing the right thing when
producing debug info for C/C++.
ELF linkers don't know dwarf, so they depend on these relocations to produce
valid dwarf output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151655 91177308-0d34-0410-b5e6-96231b3b80d8
We on the linker to resolve calls to the appropriate BL/BLX instruction
to make interworking function correctly. It uses the symbol in the
relocation to do that, so we need to be careful about being too clever.
To enable this for ARM mode, split the BL/BLX fixup kind off from the
unconditional-branch fixups.
rdar://10927209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151571 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for a missed case when the symbols in a difference
expression are in the same section but not the same fragment.
rdar://10924681
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151345 91177308-0d34-0410-b5e6-96231b3b80d8
construction. Simplify its interface, implementation, and users
accordingly as there is no longer an 'uninitialized' state to check for.
Also, fixes a bug lurking in the interface as there was one method that
didn't correctly check for initialization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151024 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the type of eh_frame on Solaris so that Sun ld doesn't fail to combine them (thus making it impossible for the unwind library to find them and breaking exceptions).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150814 91177308-0d34-0410-b5e6-96231b3b80d8
This CL delays reading of function bodies from initial parse until
materialization, allowing overlap of compilation with bitcode download.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149918 91177308-0d34-0410-b5e6-96231b3b80d8
cache disassemblers according to the string value
of the target triple, not according to the enum
of the triple CPU. The reason for this is that
certain attributes of the instruction set are not
reflected in the enum, but only in the string.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149773 91177308-0d34-0410-b5e6-96231b3b80d8
needed to emit a 64-bit gp-relative relocation entry. Make changes necessary
for emitting jump tables which have entries with directive .gpdword. This patch
does not implement the parts needed for direct object emission or JIT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149668 91177308-0d34-0410-b5e6-96231b3b80d8
symbol from an assignment. In this case the symbol did not have a fragment so
MCObjectWriter::IsSymbolRefDifferenceFullyResolved() should not have been
calling IsSymbolRefDifferenceFullyResolvedImpl() with a NULL fragment and should
just have returned false in that case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149442 91177308-0d34-0410-b5e6-96231b3b80d8
This enables the linker to match concrete relocation types (absolute or relative) with whatever library or C++ support code is being linked against.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149057 91177308-0d34-0410-b5e6-96231b3b80d8
When not using subsections via symbols, the assembler can resolve
symbol differences (including pcrel references) to non-local
labels at assembly time, not just those in the same atom.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148865 91177308-0d34-0410-b5e6-96231b3b80d8
If the two fragments are in the same Atom, then the difference
expression is resolvable at compile time. Previously we were checking
that they were in the same fragment, but that breaks down in the
presence of instruction relaxation which has multiple fragments in the
same atom.
rdar://10711829
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148423 91177308-0d34-0410-b5e6-96231b3b80d8
When the non-local symbol in the expression is in the same fragment
as the second symbol, the assembler can still evaluate the expression
without needing a relocation.
For example, on ARM:
_foo:
ldr lr, (_foo - 4)
rdar://10348687
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@148341 91177308-0d34-0410-b5e6-96231b3b80d8
directives was in the wrong place and getting triggered incorectly with a
cpp .file directive. This change fixes that and adds a test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147951 91177308-0d34-0410-b5e6-96231b3b80d8
functional change in r147860 to use DW_TAG_label's instead TAG_subprogram's.
This only changes names and updates comments. No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147877 91177308-0d34-0410-b5e6-96231b3b80d8
of several newly un-defaulted switches. This also helps optimizers
(including LLVM's) recognize that every case is covered, and we should
assume as much.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147861 91177308-0d34-0410-b5e6-96231b3b80d8
assembly source when it generates the TAG_subprogram dwarf debug info for
the labels that have nothing between them as in this bit of assembly source:
% cat ZeroLength.s
_func1:
_func2:
nop
One solution would be to not emit the subsequent labels with the same address
and use the next label with a different address or the end of the section for
the AT_high_pc value of the TAG_subprogram.
Turns out in llvm-mc it is not possible in all cases to determine of two
symbols have the same value at the point we put out the TAG_subprogram dwarf
debug info.
So we will have llvm-mc instead of putting out TAG_subprogram's put out
DW_TAG_label's. And the DW_TAG_label does not have a AT_high_pc value which
avoids the problem.
This commit is only the functional change to make the diffs clear as to what is
really being changed. The next commit will be to clean up the names of such
things like MCGenDwarfSubprogramEntry to something like MCGenDwarfLabelEntry.
rdar://10666925
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147860 91177308-0d34-0410-b5e6-96231b3b80d8
file error checking. Use that to error on an unfinished cfi_startproc.
The error is not nice, but is already better than a segmentation fault.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147717 91177308-0d34-0410-b5e6-96231b3b80d8
test cases where there were a lot of relocations applied relative to a large
rodata section. Gas would create a symbol for each of these whereas we would
be relative to the beginning of the rodata section. This change mimics what
gas does.
Patch by Jack Carter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146468 91177308-0d34-0410-b5e6-96231b3b80d8
subdirectories to traverse into.
- Originally I wanted to avoid this and just autoscan, but this has one key
flaw in that new subdirectories can not automatically trigger a rerun of the
llvm-build tool. This is particularly a pain when switching back and forth
between trees where one has added a subdirectory, as the dependencies will
tend to be wrong. This will also eliminates FIXME implicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146436 91177308-0d34-0410-b5e6-96231b3b80d8
generates the dwarf Compile Unit DIE and a dwarf subprogram DIE for each
non-temporary label.
The next part will be to get the clang driver to enable this when assembling
a .s file. rdar://9275556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146262 91177308-0d34-0410-b5e6-96231b3b80d8
symbol difference. This matches gas behavior and fixes PR11513.
We still don't handle _GLOBAL_OFFSET_TABLE_ in data sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146238 91177308-0d34-0410-b5e6-96231b3b80d8
When the file isn't being built with subsections-via-symbols, symbol
differences involving non-local symbols can be resolved more aggressively.
Needed for gas compatibility.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146054 91177308-0d34-0410-b5e6-96231b3b80d8
Whether a fixup needs relaxation for the associated instruction is a
target-specific function, as the FIXME indicated. Create a hook for that
and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145881 91177308-0d34-0410-b5e6-96231b3b80d8
as MC is the only assembler we support.
This splits MS/Windows and GNU/Windows ASM infos into two seperate classes.
While there is currently only one difference, full MS C++ ABI support will
require many more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145409 91177308-0d34-0410-b5e6-96231b3b80d8
and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144788 91177308-0d34-0410-b5e6-96231b3b80d8
This will break users of the LLVMCreateDisasm API (not that I know of any). They have to call the
LLVMInitializeAll* functions from llvm-c/Target.h themselves now. edis' C API in all its horribleness
should be unaffected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144385 91177308-0d34-0410-b5e6-96231b3b80d8
