trampoline forms. Both of these were correct in LLVM 3.0, and we don't
need to support LLVM 2.9 and earlier in mainline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145174 91177308-0d34-0410-b5e6-96231b3b80d8
I think this is the last of autoupgrade that can be removed in 3.1.
Can the atomic upgrade stuff also go?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145169 91177308-0d34-0410-b5e6-96231b3b80d8
init.trampoline and adjust.trampoline intrinsics, into two intrinsics
like in GCC. While having one combined intrinsic is tempting, it is
not natural because typically the trampoline initialization needs to
be done in one function, and the result of adjust trampoline is needed
in a different (nested) function. To get around this llvm-gcc hacks the
nested function lowering code to insert an additional parent variable
holding the adjust.trampoline result that can be accessed from the child
function. Dragonegg doesn't have the luxury of tweaking GCC code, so it
stored the result of adjust.trampoline in the memory GCC set aside for
the trampoline itself (this is always available in the child function),
and set up some new memory (using an alloca) to hold the trampoline.
Unfortunately this breaks Go which allocates trampoline memory on the
heap and wants to use it even after the parent has exited (!). Rather
than doing even more hacks to get Go working, it seemed best to just use
two intrinsics like in GCC. Patch mostly by Sanjoy Das.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139140 91177308-0d34-0410-b5e6-96231b3b80d8
call. The call may be in the same BB as the landingpad instruction. If that's
the case, then inserting the loads after the landingpad inst, but before the
extractvalues, causes undefined behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139088 91177308-0d34-0410-b5e6-96231b3b80d8
slots. This fixes a bug where the number of nodes coming into the PHI node may
not equal the number of predecessors. E.g., two or more landingpad instructions
may require a PHI before reaching the eh.exception and eh.selector instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139035 91177308-0d34-0410-b5e6-96231b3b80d8
Perform the upgrading in steps.
* First, create a map of the invokes to the EH intrinsics.
* Next, take that mapping and determine if the invoke's unwind destination has a
single predecessor. If not, then create a new empty block to hold the new
landingpad instruction.
* Create a landingpad instruction into the uwnind destination. Fill it with the
values from the old selector. Map the old intrinsic calls to the new
landingpad values (there may be multiple landingpad instructions per instrinic
call pairs).
* Go through the old intrinsic calls, create a PHI node when necessary, and then
replace their values with the new values from the landingpad instructions.
* Delete all dead instructions.
* ???
* Profit!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138990 91177308-0d34-0410-b5e6-96231b3b80d8
This upgrade suffers from the problems of the old EH scheme - i.e., that the
calls to llvm.eh.exception() and llvm.eh.selector() can wander off and get
lost. It makes a valiant effort to reclaim these little lost lambs.
This is a first draft, so it hasn't yet been hooked up to the parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138602 91177308-0d34-0410-b5e6-96231b3b80d8
for pre-2.9 bitcode files. We keep x86 unaligned loads, movnt, crc32, and the
target indep prefetch change.
As usual, updating the testsuite is a PITA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133337 91177308-0d34-0410-b5e6-96231b3b80d8
fixes aliasing issues with the old and new names as well as adds test
cases for the auto-upgrader.
Fixes rdar 9472944.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132207 91177308-0d34-0410-b5e6-96231b3b80d8
crc32.[8|16|32] have been renamed to .crc32.32.[8|16|32] and
crc64.[8|16|32] have been renamed to .crc32.64.[8|64].
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132163 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have a first-class way to represent unaligned loads, the unaligned
load intrinsics are superfluous.
First part of <rdar://problem/8460511>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129401 91177308-0d34-0410-b5e6-96231b3b80d8
was lowering them to sext / uxt + mul instructions. Unfortunately the
optimization passes may hoist the extensions out of the loop and separate them.
When that happens, the long multiplication instructions can be broken into
several scalar instructions, causing significant performance issue.
Note the vmla and vmls intrinsics are not added back. Frontend will codegen them
as intrinsics vmull* + add / sub. Also note the isel optimizations for catching
mul + sext / zext are not changed either.
First part of rdar://8832507, rdar://9203134
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@128502 91177308-0d34-0410-b5e6-96231b3b80d8
it in with the SSSE3 instructions.
Steward! Could you place this chair by the aft sun deck? I'm trying to get away
from the Astors. They are such boors!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115552 91177308-0d34-0410-b5e6-96231b3b80d8
The x86_mmx type is used for MMX intrinsics, parameters and
return values where these use MMX registers, and is also
supported in load, store, and bitcast.
Only the above operations generate MMX instructions, and optimizations
do not operate on or produce MMX intrinsics.
MMX-sized vectors <2 x i32> etc. are lowered to XMM or split into
smaller pieces. Optimizations may occur on these forms and the
result casted back to x86_mmx, provided the result feeds into a
previous existing x86_mmx operation.
The point of all this is prevent optimizations from introducing
MMX operations, which is unsafe due to the EMMS problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115243 91177308-0d34-0410-b5e6-96231b3b80d8
vabd intrinsic and add and/or zext operations. In the case of vaba, this
also avoids the need for a DAG combine pattern to combine vabd with add.
Update tests. Auto-upgrade the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112941 91177308-0d34-0410-b5e6-96231b3b80d8
add, and subtract operations with zero-extended or sign-extended vectors.
Update tests. Add auto-upgrade support for the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112773 91177308-0d34-0410-b5e6-96231b3b80d8
IR add/sub operations with one or both operands sign- or zero-extended.
Auto-upgrade the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112416 91177308-0d34-0410-b5e6-96231b3b80d8
Update all the tests using those intrinsics and add support for
auto-upgrading bitcode files with the old versions of the intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112271 91177308-0d34-0410-b5e6-96231b3b80d8
shifts and null vectors. Autoupgrade these to what we'd lower them to.
Add a testcase to exercise this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101851 91177308-0d34-0410-b5e6-96231b3b80d8
Probably the best way to know that all getOperand() calls have been handled
is to replace that API instead of updating.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101579 91177308-0d34-0410-b5e6-96231b3b80d8
with a fix for self-hosting
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101465 91177308-0d34-0410-b5e6-96231b3b80d8
with a fix
rotate CallInst operands, i.e. move callee to the back
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101397 91177308-0d34-0410-b5e6-96231b3b80d8
of the operand array
the motivation for this patch are laid out in my mail to llvm-commits:
more efficient access to operands and callee, faster callgraph-construction,
smaller compiler binary
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101364 91177308-0d34-0410-b5e6-96231b3b80d8
