library for color support detection. This still will use a curses
library if that is all we have available on the system. This change
tries to use a smaller subset of the curses library, specifically the
subset that is on some systems split off into a separate library. For
example, if you install ncurses configured --with-tinfo, a 'libtinfo' is
install that provides just the terminfo querying functionality. That
library is now used instead of curses when it is available.
This happens to fix a build error on systems with that library because
when we tried to link ncurses into the binary, we didn't pull tinfo in
as well. =]
It should also provide an easy path for supporting the NetBSD
libterminfo library, but as I don't have access to a NetBSD system I'm
leaving adding that support to those folks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188160 91177308-0d34-0410-b5e6-96231b3b80d8
LLVMConfig.cmake file that is (I think) used in the stand-alone Clang
build, and causing link errors there w.r.t. curses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187950 91177308-0d34-0410-b5e6-96231b3b80d8
using it to detect whether or not a terminal supports colors. This
replaces a particularly egregious hack that merely compared the TERM
environment variable to "dumb". That doesn't really translate to
a reasonable experience for users that have actually ensured their
terminal's capabilities are accurately reflected.
This makes testing a terminal for color support somewhat more expensive,
but it is called very rarely anyways. The important fast path when the
output is being piped somewhere is already in place.
The global lock may seem excessive, but the spec for calling into curses
is *terrible*. The whole library is terrible, and I spent quite a bit of
time looking for a better way of doing this before convincing myself
that this was the fundamentally correct way to behave. The damage of the
curses library is very narrowly confined, and we continue to use raw
escape codes for actually manipulating the colors which is a much sane
system than directly using curses here (IMO).
If this causes trouble for folks, please let me know. I've tested it on
Linux and will watch the bots carefully. I've also worked to account for
the variances of curses interfaces that I could finde documentation for,
but that may not have been sufficient.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187874 91177308-0d34-0410-b5e6-96231b3b80d8
The issue is that CMAKE_BUILD_TYPE=RelWithDebInfo LLVM_ENABLE_ASSERTIONS=ON was
not building with assertions enabled. (I was unable to find what in the LLVM
source tree was adding -DNDEBUG to the build line in this case, so decided that
it must be cmake itself that was adding it - this may depend on the cmake
version). The fix treats any mode that is not Debug as being the same as
Release for this purpose (previously it was being assumed that cmake would only
add -DNDEBUG for Release and not for RelWithDebInfo or MinSizeRel). If other
versions of cmake don't add -DNDEBUG for RelWithDebInfo then that's OK: with
this change you just get a useless but harmless -UNDEBUG or -DNDEBUG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186499 91177308-0d34-0410-b5e6-96231b3b80d8
to have them appear in the right order. Instead append all warnings explicitly
to the language flags. This was already the case for many warnings. Fixes the
issue of -Wno-maybe-uninitialized not being effective because -Wall was being
placed after it rather than before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177866 91177308-0d34-0410-b5e6-96231b3b80d8
CMake and autotools disagree on what "host" means in a cross-compilation
context. Autotools (and lit) take it to be the machine the binaries being
compiled now will run on. CMake takes it to be the machine actually compiling
the binaries now.
This change makes lit.site-cfg more consistent between autotools and CMake,
allowing lit tests (particularly in ExecutionEngine) to run correctly when
cross-compiled with CMake
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175179 91177308-0d34-0410-b5e6-96231b3b80d8
Added support to the cmake build to turn off uninitialized use warnings
for gcc. This cleans the build up somewhat.
Used logic simpler than found in autoconf by making use of the fact that
although gcc won't complain about unsupported -Wno-* flags it *will*
complain about unsupported -W flags.
Reviewers: gribozavr, doug.gregor, chandlerc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174299 91177308-0d34-0410-b5e6-96231b3b80d8
catches uses of an extremely minor and widely-available C++ extension (which
every C++ compiler I could find supports, but EDG and Clang reject in strict
mode).
The diagnosed code pattern looks like this:
struct X {
union {
struct {
int a;
int b;
} S;
};
};
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174103 91177308-0d34-0410-b5e6-96231b3b80d8
gcc produces false positives for empty braces so turning the warning off.
Instead, turning the warning on for clang so proper warnings aren't missed.
Reviewers: dblaikie, chandlerc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174073 91177308-0d34-0410-b5e6-96231b3b80d8
For example,
cur) unittests/ADT/Release/ADTTests
new) unittests/ADT/ADTTests
RUNTIME_BUILD_MODE can be substituted to CMAKE_CFG_INTDIR.
With Make and Ninja, the tree is not built with multiple configurations.
Then, including the build type in target directory doesn't make sense.
See also "How can I build multiple modes without switching?"
http://www.cmake.org/Wiki/CMake_FAQ
CMAKE_CFG_INTDIR is set to "."
With multiple-configuration-aware build system, like Visual Studio, each unittest is built on appropriate directory, for example,
unittests/ADT/Release/ADTTests.exe
CMAKE_CFG_INTDIR is set to build system's variable, like "$(Configuration)" or "$(OutDir)".
Thus, "--param build_config" is also deprecated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173616 91177308-0d34-0410-b5e6-96231b3b80d8
This warning fires on:
Operator::~Operator() {
llvm_unreachable("should never destroy an Operator");
}
That seems like a false positive. I don't see any good way to silence
the warning here, so I'm disabling it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173455 91177308-0d34-0410-b5e6-96231b3b80d8
wall time, user time, and system time since a process started.
For walltime, we currently use TimeValue's interface and a global
initializer to compute a close approximation of total process runtime.
For user time, this adds support for an somewhat more precise timing
mechanism -- clock_gettime with the CLOCK_PROCESS_CPUTIME_ID clock
selected.
For system time, we have to do a full getrusage call to extract the
system time from the OS. This is expensive but unavoidable.
In passing, clean up the implementation of the old APIs and fix some
latent bugs in the Windows code. This might have manifested on Windows
ARM systems or other systems with strange 64-bit integer behavior.
The old API for this both user time and system time simultaneously from
a single getrusage call. While this results in fewer system calls, it
also results in a lower precision user time and if only user time is
desired, it introduces a higher overhead. It may be worthwhile to switch
some of the pass timers to not track system time and directly track user
and wall time. The old API also tracked walltime in a confusing way --
it just set it to the current walltime rather than providing any measure
of wall time since the process started the way buth user and system time
are tracked. The new API is more consistent here.
The plan is to eventually implement these methods for a *child* process
by using the wait3(2) system call to populate an rusage struct
representing the whole subprocess execution. That way, after waiting on
a child process its stats will become accurate and cheap to query.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171551 91177308-0d34-0410-b5e6-96231b3b80d8
"check-all" can be executed with 0 status, "check-all does nothing, no tools built."
LLVM_EXTERNAL_CLANG_BUILD=OFF LLVM_BUILD_TOOLS=OFF can reproduce this.
Oscar Fuentes reported this. Thank you.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171046 91177308-0d34-0410-b5e6-96231b3b80d8
If the local checkout does not have 'git svn' references set up, don't try
to use 'git svn' for version information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169749 91177308-0d34-0410-b5e6-96231b3b80d8
Adding CXX_SUPPORTS_COVERED_SWITCH_DEFAULT_FLAG
C_SUPPORTS_COVERED_SWITCH_DEFAULT_FLAG
This is to handle the wackiness on a Mac host where cmake detects:
CMAKE_CXX_COMPILER == "/usr/bin/c++"
CMAKE_C_COMPILER == "/usr/bin/gcc"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168577 91177308-0d34-0410-b5e6-96231b3b80d8
- Substitute hyphen to underscore, s/-/_/g, as the variable name.
- Additional parameter can be specified as the name of directory.
e.g.) add_llvm_external_project(clang-tools-extra extra)
- LLVM_EXTERNAL_CLANG_TOOLS_EXTRA_SOURCE_DIR=/path/to/llvm-srcroot/tools/clang/tools/extra, by default.
- Build directory is in ${CMAKE_CURRENT_BINARY_DIR}/extra
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165311 91177308-0d34-0410-b5e6-96231b3b80d8
in the abstraction for lit test suites so that the various other layers
of abstraction pick up the same behavioral fix, and so that we still get
a complete list of dependencies for the 'check-all' target.
This should fix the follow-on issues of the same nature with various
other build targets, including Clang targets. Sorry for the churn, and
again thanks to Matt for testing and breaking this more thoroughly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159593 91177308-0d34-0410-b5e6-96231b3b80d8