Before the fix Thumb2 instructions of type "add rD, rN, #imm" (T3 encoding, see ARM ARM A8.8.4) with rD and rN both being low registers (r0-r7) were classified as having the T4 encoding.
The T4 encoding doesn't have a cc_out operand so for above instructions the operand gets erroneously removed, corrupting the token stream and leading to parse errors later in the process.
This bug prevented "add r1, r7, #0xcbcbcbcb" from being assembled correctly.
Fixes <rdar://problem/14224440>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185575 91177308-0d34-0410-b5e6-96231b3b80d8
1. it should accept only 4-byte aligned addresses
2. the maximum offset should be 1020
3. it should be encoded with the offset scaled by two bits
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185528 91177308-0d34-0410-b5e6-96231b3b80d8
According to ARM EHABI section 9.2, if the
__aeabi_unwind_cpp_pr1() or __aeabi_unwind_cpp_pr2() is
used, then the handler data must be emitted after the unwind
opcodes. The handler data consists of several words, and
should be terminated by zero.
In case that the .handlerdata directive is not specified by
the programmer, we should emit zero to terminate the handler
data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185422 91177308-0d34-0410-b5e6-96231b3b80d8
The mapping between SRS pseudo-instructions and SRS native instructions was incorrect, the correct mapping is:
srsfa -> srsib
srsea -> srsia
srsfd -> srsdb
srsed -> srsda
This fixes <rdar://problem/14214734>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185155 91177308-0d34-0410-b5e6-96231b3b80d8
algorithm when assigning EnumValues to the synthesized registers.
The current algorithm, LessRecord, uses the StringRef compare_numeric
function. This function compares strings, while handling embedded numbers.
For example, the R600 backend registers are sorted as follows:
T1
T1_W
T1_X
T1_XYZW
T1_Y
T1_Z
T2
T2_W
T2_X
T2_XYZW
T2_Y
T2_Z
In this example, the 'scaling factor' is dEnum/dN = 6 because T0, T1, T2
have an EnumValue offset of 6 from one another. However, in other parts
of the register bank, the scaling factors are different:
dEnum/dN = 5:
KC0_128_W
KC0_128_X
KC0_128_XYZW
KC0_128_Y
KC0_128_Z
KC0_129_W
KC0_129_X
KC0_129_XYZW
KC0_129_Y
KC0_129_Z
The diff lists do not work correctly because different kinds of registers have
different 'scaling factors'. This new algorithm, LessRecordRegister, tries to
enforce a scaling factor of 1. For example, the registers are now sorted as
follows:
T1
T2
T3
...
T0_W
T1_W
T2_W
...
T0_X
T1_X
T2_X
...
KC0_128_W
KC0_129_W
KC0_130_W
...
For the Mips and R600 I see a 19% and 6% reduction in size, respectively. I
did see a few small regressions, but the differences were on the order of a
few bytes (e.g., AArch64 was 16 bytes). I suspect there will be even
greater wins for targets with larger register files.
Patch reviewed by Jakob.
rdar://14006013
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185094 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately this addresses two issues (by the time I'd disentangled the logic
it wasn't worth putting it back to half-broken):
+ Coprocessor instructions should all be predicable in Thumb mode.
+ BKPT should never be predicable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184965 91177308-0d34-0410-b5e6-96231b3b80d8
The barrier instructions are only "always-execute" in ARM mode, they can quite
happily sit inside an IT block in Thumb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184964 91177308-0d34-0410-b5e6-96231b3b80d8
In thumb1, NOP is a pseudo-instruction equivalent to mov r8, r8.
However the disassembler should not use this alias.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184703 91177308-0d34-0410-b5e6-96231b3b80d8
The cdp2 instruction should have the same restrictions as cdp on the
co-processor registers.
VFP instructions on v8/AArch32 share the same encoding space as cdp2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184445 91177308-0d34-0410-b5e6-96231b3b80d8
"When assembling to the ARM instruction set, the .N qualifier produces
an assembler error and the .W qualifier has no effect."
In the pre-matcher handler in the asm parser the ".w" (wide) qualifier
when in ARM mode is now discarded. And an error message is now
produced when the ".n" (narrow) qualifier is used in ARM mode.
Test cases for these were added.
rdar://14064574
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184224 91177308-0d34-0410-b5e6-96231b3b80d8
When using a positive offset, literal loads where encoded
as if it was negative, because:
- The sign bit was not assigned to an operand
- The addrmode_imm12 operand was not encoding the sign bit correctly
This patch also makes the assembler look at the .w/.n specifier for
loads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184182 91177308-0d34-0410-b5e6-96231b3b80d8
Negative zero is returned by the primary expression parser as INT32_MIN, so all that the method needs to do is to accept this value.
Behavior already present for Thumb2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183734 91177308-0d34-0410-b5e6-96231b3b80d8
- Don't use assert(0), or tests may pass or fail according to assertions.
- For now, The tests are marked as XFAIL for win32 hosts.
FIXME: Could we avoid XFAIL to specify triple in the RUN lines?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183728 91177308-0d34-0410-b5e6-96231b3b80d8
Some ARM CPUs only support ARM mode (ancient v4 ones, for example) and some
only support Thumb mode (M-class ones currently). This makes sure such CPUs
default to the correct mode and makes the AsmParser diagnose an attempt to
switch modes incorrectly.
rdar://14024354
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183710 91177308-0d34-0410-b5e6-96231b3b80d8
Changes to ARM unwind opcode assembler:
* Fix multiple .save or .vsave directives. Besides, the
order is preserved now.
* For the directives which will generate multiple opcodes,
such as ".save {r0-r11}", the order of the unwind opcode
is fixed now, i.e. the registers with less encoding value
are popped first.
* Fix the $sp offset calculation. Now, we can use the
.setfp, .pad, .save, and .vsave directives at any order.
Changes to test cases:
* Add test cases to check the order of multiple opcodes
for the .save directive.
* Fix the incorrect $sp offset in the test case. The
stack pointer offset specified in the test case was
incorrect. (Changed test cases: ehabi-mc-section.ll and
ehabi-mc.ll)
* The opcode to restore $sp are slightly reordered. The
behavior are not changed, and the new output is same
as the output of GNU as. (Changed test cases:
eh-directive-pad.s and eh-directive-setfp.s)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183627 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions are deprecated oddities, but we still need to be able to
disassemble (and reassemble) them if and when they're encountered.
Patch by Amaury de la Vieuville.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183011 91177308-0d34-0410-b5e6-96231b3b80d8
For COFF and MachO, sections semantically have relocations that apply to them.
That is not the case on ELF.
In relocatable objects (.o), a section with relocations in ELF has offsets to
another section where the relocations should be applied.
In dynamic objects and executables, relocations don't have an offset, they have
a virtual address. The section sh_info may or may not point to another section,
but that is not actually used for resolving the relocations.
This patch exposes that in the ObjectFile API. It has the following advantages:
* Most (all?) clients can handle this more efficiently. They will normally walk
all relocations, so doing an effort to iterate in a particular order doesn't
save time.
* llvm-readobj now prints relocations in the same way the native readelf does.
* probably most important, relocations that don't point to any section are now
visible. This is the case of relocations in the rela.dyn section. See the
updated relocation-executable.test for example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182908 91177308-0d34-0410-b5e6-96231b3b80d8
ARM FastISel is currently only enabled for iOS non-Thumb1, and I'm working on
enabling it for other targets. As a first step I've fixed some of the tests.
Changes to ARM FastISel tests:
- Different triples don't generate the same relocations (especially
movw/movt versus constant pool loads). Use a regex to allow either.
- Mangling is different. Use a regex to allow either.
- The reserved registers are sometimes different, so registers get
allocated in a different order. Capture the names only where this
occurs.
- Add -verify-machineinstrs to some tests where it works. It doesn't
work everywhere it should yet.
- Add -fast-isel-abort to many tests that didn't have it before.
- Split out the VarArg test from fast-isel-call.ll into its own
test. This simplifies test setup because of --check-prefix.
Patch by JF Bastien
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181801 91177308-0d34-0410-b5e6-96231b3b80d8
This commit implements the AsmParser for fnstart, fnend,
cantunwind, personality, handlerdata, pad, setfp, save, and
vsave directives.
This commit fixes some minor issue in the ARMELFStreamer:
* The switch back to corresponding section after the .fnend
directive.
* Emit the unwind opcode while processing .fnend directive
if there is no .handlerdata directive.
* Emit the unwind opcode to .ARM.extab while processing
.handlerdata even if .personality directive does not exist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181603 91177308-0d34-0410-b5e6-96231b3b80d8
The reference encoding is correct, but written in the wrong byte order (these are Thumb tests, while the reference is in ARM byte order).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181420 91177308-0d34-0410-b5e6-96231b3b80d8
"hint" space for Thumb actually overlaps the encoding space of the CPS
instruction. In actuality, hints can be defined as CPS instructions where imod
and M bits are all nil.
Handle decoding of permitted nop-compatible hints (i.e. nop, yield, wfi, wfe,
sev) in DecodeT2CPSInstruction.
This commit adds a proper diagnostic message for Imm0_4 and updates all tests.
Patch by Mihail Popa <Mihail.Popa@arm.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180617 91177308-0d34-0410-b5e6-96231b3b80d8
The reference manual defines only 5 permitted values for the immediate field of the "hint" instruction:
1. nop (imm == 0)
2. yield (imm == 1)
3. wfe (imm == 2)
4. wfi (imm == 3)
5. sev (imm == 4)
Therefore, restrict the permitted values for the "hint" instruction to 0 through 4.
Patch by Mihail Popa <Mihail.Popa@arm.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179707 91177308-0d34-0410-b5e6-96231b3b80d8
These are aliases for VACGT and VACGE, respectively, with the source
operands reversed.
rdar://13638090
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179575 91177308-0d34-0410-b5e6-96231b3b80d8
According to the ARM reference manual, constant offsets are mandatory for pre-indexed addressing modes.
The MC disassembler was not obeying this when the offset is 0.
It was producing instructions like: str r0, [r1]!.
Correct syntax is: str r0, [r1, #0]!.
This change modifies the dumping of operands so that the offset is always printed, regardless of its value, when pre-indexed addressing mode is used.
Patch by Mihail Popa <Mihail.Popa@arm.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179398 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions aren't universally available, but depend on a specific
extension to the normal ARM architecture (rather than, say, v6/v7/...) so a new
feature is appropriate.
This also enables the feature by default on A-class cores which usually have
these extensions, to avoid breaking existing code and act as a sensible
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179171 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an issue where trying to assemlbe valid ADR instructions would cause
LLVM to hit a failed assertion.
Patch by Keith Walker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176189 91177308-0d34-0410-b5e6-96231b3b80d8
The Printer will now print instructions with the correct alignment specifier syntax, like
vld1.8 {d16}, [r0:64]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175884 91177308-0d34-0410-b5e6-96231b3b80d8
With bundle alignment, instructions all get their own MCFragments
(unless they are in a bundle-locked group). For instructions with
fixups, this is an MCDataFragment. Emitting actual data (e.g. for
.long) attempts to re-use MCDataFragments, which we don't want int
this case since it leads to fragments which exceed the bundle size.
So, don't reuse them in this case.
Also adds a test and fixes some formatting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175316 91177308-0d34-0410-b5e6-96231b3b80d8
assembler should also accept a two arg form, as the docuemntation specifies that
the first (destination) register is optional.
This patch uses TwoOperandAliasConstraint to add the two argument form.
It also fixes an 80-column formatting problem in:
test/MC/ARM/neon-bitwise-encoding
<rdar://problem/12909419> Clang rejects ARM NEON assembly instructions
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175221 91177308-0d34-0410-b5e6-96231b3b80d8
The parser will now accept instructions with alignment specifiers written like
vld1.8 {d16}, [r0:64]
, while also still accepting the incorrect syntax
vld1.8 {d16}, [r0, :64]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175164 91177308-0d34-0410-b5e6-96231b3b80d8
and update ELF header e_flags.
Currently gathering information such as symbol,
section and data is done by collecting it in an
MCAssembler object. From MCAssembler and MCAsmLayout
objects ELFObjectWriter::WriteObject() forms and
streams out the ELF object file.
This patch just adds a few members to the MCAssember
class to store and access the e_flag settings. It
allows for runtime additions to the e_flag by
assembler directives. The standalone assembler can
get to MCAssembler from getParser().getStreamer().getAssembler().
This patch is the generic infrastructure and will be
followed by patches for ARM and Mips for their target
specific use.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173882 91177308-0d34-0410-b5e6-96231b3b80d8
make into the last commit.
Also, update the test-generation script to generate an exhaustive test for
align_to_end as well, and include the generated test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171811 91177308-0d34-0410-b5e6-96231b3b80d8
