------------------------------------------------------------------------
r222672 | uweigand | 2014-11-24 18:09:47 +0000 (Mon, 24 Nov 2014) | 10 lines
[PowerPC] Fix PR 21652 - copy st_other bits on symbol assignment
When processing an assignment in the integrated assembler that sets
a symbol to the value of another symbol, we need to copy the st_other
bits that encode the local entry point offset.
Modeled after MipsTargetELFStreamer::emitAssignment handling of the
ELF::STO_MIPS_MICROMIPS flag.
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@223743 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed in a previous checking to support the .localentry
directive on PowerPC, we need to inspect the actual target symbol
in needsRelocateWithSymbol to make the appropriate decision based
on that symbol's st_other bits.
Currently, needsRelocateWithSymbol does not get the target symbol.
However, it is directly available to its sole caller. This patch
therefore simply extends the needsRelocateWithSymbol by a new
parameter "const MCSymbolData &SD", passes in the target symbol,
and updates all derived implementations.
In particular, in the PowerPC implementation, this patch removes
the FIXME added by the previous checkin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213487 91177308-0d34-0410-b5e6-96231b3b80d8
A second binutils feature needed to support ELFv2 is the .localentry
directive. In the ELFv2 ABI, functions may have two entry points:
one for calling the routine locally via "bl", and one for calling the
function via function pointer (either at the source level, or implicitly
via a PLT stub for global calls). The two entry points share a single
ELF symbol, where the ELF symbol address identifies the global entry
point address, while the local entry point is found by adding a delta
offset to the symbol address. That offset is encoded into three
platform-specific bits of the ELF symbol st_other field.
The .localentry directive instructs the assembler to set those fields
to encode a particular offset. This is typically used by a function
prologue sequence like this:
func:
addis r2, r12, (.TOC.-func)@ha
addi r2, r2, (.TOC.-func)@l
.localentry func, .-func
Note that according to the ABI, when calling the global entry point,
r12 must be set to point the global entry point address itself; while
when calling the local entry point, r2 must be set to point to the TOC
base. The two instructions between the global and local entry point in
the above example translate the first requirement into the second.
This patch implements support in the PowerPC MC streamers to emit the
.localentry directive (both into assembler and ELF object output), as
well as support in the assembler parser to parse that directive.
In addition, there is another change required in MC fixup/relocation
handling to properly deal with relocations targeting function symbols
with two entry points: When the target function is known local, the MC
layer would immediately handle the fixup by inserting the target
address -- this is wrong, since the call may need to go to the local
entry point instead. The GNU assembler handles this case by *not*
directly resolving fixups targeting functions with two entry points,
but always emits the relocation and relies on the linker to handle
this case correctly. This patch changes LLVM MC to do the same (this
is done via the processFixupValue routine).
Similarly, there are cases where the assembler would normally emit a
relocation, but "simplify" it to a relocation targeting a *section*
instead of the actual symbol. For the same reason as above, this
may be wrong when the target symbol has two entry points. The GNU
assembler again handles this case by not performing this simplification
in that case, but leaving the relocation targeting the full symbol,
which is then resolved by the linker. This patch changes LLVM MC
to do the same (via the needsRelocateWithSymbol routine).
NOTE: The method used in this patch is overly pessimistic, since the
needsRelocateWithSymbol routine currently does not have access to the
actual target symbol, and thus must always assume that it might have
two entry points. This will be improved upon by a follow-on patch
that modifies common code to pass the target symbol when calling
needsRelocateWithSymbol.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213485 91177308-0d34-0410-b5e6-96231b3b80d8
ELFv2 binaries are marked by a bit in the ELF header e_flags field.
A new assembler directive .abiversion can be used to set that flag.
This patch implements support in the PowerPC MC streamers to emit the
.abiversion directive (both into assembler and ELF binary output),
as well as support in the assembler parser to parse the .abiversion
directive.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213484 91177308-0d34-0410-b5e6-96231b3b80d8
This adds initial support for PPC32 ELF PIC (Position Independent Code; the
-fPIC variety), thus rectifying a long-standing deficiency in the PowerPC
backend.
Patch by Justin Hibbits!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213427 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, llvm always emits a DWARF CIE with a version of 1, even when emitting
DWARF 3 or 4, which both support CIE version 3. This patch makes it emit the
newer CIE version when we are emitting DWARF 3 or 4. This will not reduce
compatibility, as we already emit other DWARF3/4 features, and is worth doing as
the DWARF3 spec removed some ambiguities in the interpretation of call frame
information.
It also fixes a minor bug where the "return address" field of the CIE was
encoded as a ULEB128, which is only valid when the CIE version is 3. There are
no test changes for this, because (as far as I can tell) none of the platforms
that we test have a return address register with a DWARF register number >127.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211272 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, we bind those directives with the last symbol, so if none
has been defined, this would lead to a crash of the compiler.
<rdar://problem/15939159>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206236 91177308-0d34-0410-b5e6-96231b3b80d8
As a first step towards real little-endian code generation, this patch
changes the PowerPC MC layer to actually generate little-endian object
files. This involves passing the little-endian flag through the various
layers, including down to createELFObjectWriter so we actually get basic
little-endian ELF objects, emitting instructions in little-endian order,
and handling fixups and relocations as appropriate for little-endian.
The bulk of the patch is to update most test cases in test/MC/PowerPC
to verify both big- and little-endian encodings. (The only test cases
*not* updated are those that create actual big-endian ABI code, like
the TLS tests.)
Note that while the object files are now little-endian, the generated
code itself is not yet updated, in particular, it still does not adhere
to the ELFv2 ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204634 91177308-0d34-0410-b5e6-96231b3b80d8
VSX is an ISA extension supported on the POWER7 and later cores that enhances
floating-point vector and scalar capabilities. Among other things, this adds
<2 x double> support and generally helps to reduce register pressure.
The interesting part of this ISA feature is the register configuration: there
are 64 new 128-bit vector registers, the 32 of which are super-registers of the
existing 32 scalar floating-point registers, and the second 32 of which overlap
with the 32 Altivec vector registers. This makes things like vector insertion
and extraction tricky: this can be free but only if we force a restriction to
the right register subclass when needed. A new "minipass" PPCVSXCopy takes care
of this (although it could do a more-optimal job of it; see the comment about
unnecessary copies below).
Please note that, currently, VSX is not enabled by default when targeting
anything because it is not yet ready for that. The assembler and disassembler
are fully implemented and tested. However:
- CodeGen support causes miscompiles; test-suite runtime failures:
MultiSource/Benchmarks/FreeBench/distray/distray
MultiSource/Benchmarks/McCat/08-main/main
MultiSource/Benchmarks/Olden/voronoi/voronoi
MultiSource/Benchmarks/mafft/pairlocalalign
MultiSource/Benchmarks/tramp3d-v4/tramp3d-v4
SingleSource/Benchmarks/CoyoteBench/almabench
SingleSource/Benchmarks/Misc/matmul_f64_4x4
- The lowering currently falls back to using Altivec instructions far more
than it should. Worse, there are some things that are scalarized through the
stack that shouldn't be.
- A lot of unnecessary copies make it past the optimizers, and this needs to
be fixed.
- Many more regression tests are needed.
Normally, I'd fix these things prior to committing, but there are some
students and other contributors who would like to work this, and so it makes
sense to move this development process upstream where it can be subject to the
regular code-review procedures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203768 91177308-0d34-0410-b5e6-96231b3b80d8
When printing assembly we don't have a Layout object, but we can still
try to fold some constants.
Testcase by Ulrich Weigand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203677 91177308-0d34-0410-b5e6-96231b3b80d8
When asked to pad an irregular number of bytes, we should fill with
zeros. This is consistent with the behavior specified in the AIX
Assembler Language Reference as well as other LLVM and binutils
assemblers.
N.B. There is a small deviation from binutils' PPC assembler:
when handling pads which are greater than 4 bytes but not mod 4,
binutils will not emit any NOP sequences at all and only use zeros.
This may or may not be a bug but there is no excellent rationale as to
why that behavior is important to emulate. If that behavior is needed,
we can change writeNopData() to behave in the same way.
This fixes PR17352.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191426 91177308-0d34-0410-b5e6-96231b3b80d8
Encodings were checked against the Power ISA documents and double
checked against binutils.
This fixes PR17350.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191419 91177308-0d34-0410-b5e6-96231b3b80d8
The binutils assembler supports a mode called DOLLAR_DOT which treats
the dollar sign token as a reference to the current program counter if
the dollar sign doesn't precede a constant or identifier.
This commit adds a new MCAsmInfo flag stating whether or not a given
target supports this interpretation of the dollar sign token; by
default, this flag is not enabled.
Further, enable this flag for PPC. The system assembler for AIX and
binutils both support using the dollar sign in this manner.
This fixes PR17353.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191368 91177308-0d34-0410-b5e6-96231b3b80d8
Use the new instruction deprecation feature to mark mftb (now replaced with
mfspr) and dst (along with the other Altivec cache control instructions) as
deprecated when targeting cores supporting at least ISA v2.03.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190605 91177308-0d34-0410-b5e6-96231b3b80d8
first. Use this to turn the PPC modifiers into PPC specific expressions,
allowing them to work on constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189400 91177308-0d34-0410-b5e6-96231b3b80d8
Modern PPC cores support a floating-point copysign instruction, and we can use
this to lower the FCOPYSIGN node (which is created from calls to the libm
copysign function). A couple of extra patterns are necessary because the
operand types of FCOPYSIGN need not agree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188653 91177308-0d34-0410-b5e6-96231b3b80d8
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188513 91177308-0d34-0410-b5e6-96231b3b80d8
Various tests had sprung up over the years which had --check-prefix=ABC on the
RUN line, but "CHECK-ABC:" later on. This happened to work before, but was
strictly incorrect. FileCheck is getting stricter soon though.
Patch by Ron Ofir.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188173 91177308-0d34-0410-b5e6-96231b3b80d8
In the commit message to r185476 I wrote:
>The PowerPC-specific modifiers VK_PPC_TLSGD and VK_PPC_TLSLD
>correspond exactly to the generic modifiers VK_TLSGD and VK_TLSLD.
>This causes some confusion with the asm parser, since VK_PPC_TLSGD
>is output as @tlsgd, which is then read back in as VK_TLSGD.
>
>To avoid this confusion, this patch removes the PowerPC-specific
>modifiers and uses the generic modifiers throughout. (The only
>drawback is that the generic modifiers are printed in upper case
>while the usual convention on PowerPC is to use lower-case modifiers.
>But this is just a cosmetic issue.)
This was unfortunately incorrect, there is is fact another,
serious drawback to using the default VK_TLSLD/VK_TLSGD
variant kinds: using these causes ELFObjectWriter::RelocNeedsGOT
to return true, which in turn causes the ELFObjectWriter to emit
an undefined reference to _GLOBAL_OFFSET_TABLE_.
This is a problem on powerpc64, because it uses the TOC instead
of the GOT, and the linker does not provide _GLOBAL_OFFSET_TABLE_,
so the symbol remains undefined. This means shared libraries
using TLS built with the integrated assembler are currently
broken.
While the whole RelocNeedsGOT / _GLOBAL_OFFSET_TABLE_ situation
probably ought to be properly fixed at some point, for now I'm
simply reverting the r185476 commit. Now this in turn exposes
the breakage of handling @tlsgd/@tlsld in the asm parser that
this check-in was originally intended to fix.
To avoid this regression, I'm also adding a different fix for
this problem: while common code now parses @tlsgd as VK_TLSGD,
a special hack in the asm parser translates this code to the
platform-specific VK_PPC_TLSGD that the back-end now expects.
While this is not really pretty, it's self-contained and
shouldn't hurt anything else for now. One the underlying
problem is fixed, this hack can be reverted again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185945 91177308-0d34-0410-b5e6-96231b3b80d8
The PowerPC assembler is supposed to provide a directive .machine
that allows switching the supported CPU instruction set on the fly.
Since we do not yet check CPU feature sets at all and always accept
any available instruction, this is not really useful at this point.
However, it makes sense to accept (and ignore) ".machine any" to
avoid spuriously rejecting existing assembler files that use this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185924 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the .llong PowerPC-specifc assembler directive.
In doing so, I notices that .word is currently incorrect: it is
supposed to define a 2-byte data element, not a 4-byte one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185911 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the old-style time base instructions;
while new programs are supposed to use mfspr, the mftb instructions
are still supported and in use by existing assembler files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185829 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the basic mnemoics (with the L operand) for the
fixed-point compare instructions. These are defined as aliases for the
already existing CMPW/CMPD patterns, depending on the value of L.
This requires use of InstAlias patterns with immediate literal operands.
To make this work, we need two further changes:
- define a RegisterPrefix, because otherwise literals 0 and 1 would
be parsed as literal register names
- provide a PPCAsmParser::validateTargetOperandClass routine to
recognize immediate literals (like ARM does)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185826 91177308-0d34-0410-b5e6-96231b3b80d8
When a target@got@tprel or target@got@tprel@l symbol variant is used in
a fixup_ppc_half16 (*not* fixup_ppc_half16ds) context, we currently fail,
since the corresponding R_PPC64_GOT_TPREL16 / R_PPC64_GOT_TPREL16_LO
relocation types do not exist.
However, since such symbol variants resolve to GOT offsets which are
always 4-aligned, we can simply instead use the _DS variants of the
relocation types, which *do* exist.
The same applies for the @got@dtprel variants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185700 91177308-0d34-0410-b5e6-96231b3b80d8
The ppc64-fixups.s test currently fails to build with GNU as, since it
does not support plain symbols as arguments to li/lis. Rewrite the test
for R_PPC64_ADDR16 and R_PPC64_REL16 to use lwz instead.
Allowing the test case to be built with both LLVM and GNU as makes it
easier to spot unwanted difference in the output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185694 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the last missing construct to parse TLS-related
assembler code:
add 3, 4, symbol@tls
The ADD8TLS currently hard-codes the @tls into the assembler string.
This cannot be handled by the asm parser, since @tls is parsed as
a symbol variant. This patch changes ADD8TLS to have the @tls suffix
printed as symbol variant on output too, which allows us to remove
the isCodeGenOnly marker from ADD8TLS. This in turn means that we
can add a AsmOperand to accept @tls marked symbols on input.
As a side effect, this means that the fixup_ppc_tlsreg fixup type
is no longer necessary and can be merged into fixup_ppc_nofixup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185692 91177308-0d34-0410-b5e6-96231b3b80d8
This implements a proper PPCAsmBackend::writeNopData routine
that actually writes PowerPC nop instructions.
This fixes the last remaining difference in object file output
(text section) between the integrated assembler and GNU as
that I've seen anywhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185662 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for specifying condition registers and
condition register fields via expressions using the symbols
defined by the PowerISA, like "4*cr2+eq".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185633 91177308-0d34-0410-b5e6-96231b3b80d8
Just as with mfocrf, it is also preferable to use mtocrf instead of
mtcrf when only a single CR register is to be written.
Current code however always emits mtcrf. This probably does not matter
when using an external assembler, since the GNU assembler will in fact
automatically replace mtcrf with mtocrf when possible. It does create
inefficient code with the integrated assembler, however.
To fix this, this patch adds MTOCRF/MTOCRF8 instruction patterns and
uses those instead of MTCRF/MTCRF8 everything. Just as done in the
MFOCRF patch committed as 185556, these patterns will be converted
back to MTCRF if MTOCRF is not available on the machine.
As a side effect, this allows to modify the MTCRF pattern to accept
the full range of mask operands for the benefit of the asm parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185561 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the generic forms of mtspr/mfspr
for the asm parser. The compiler will continue to use
the specialized patters for mtlr etc. since those are
needed to correctly describe data flow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185532 91177308-0d34-0410-b5e6-96231b3b80d8
This patch now adds support for recognizing TLS call sequences in
the asm parser. This needs a new pattern BL8_TLS, which is like
BL8_NOP_TLS except without nop. That pattern is used for the
asm parser only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185478 91177308-0d34-0410-b5e6-96231b3b80d8
There are a couple of (small) related changes here:
1. The printed name of the VRSAVE register has been changed from VRsave to
vrsave in order to match the name accepted by GNU binutils.
2. Support for parsing vrsave has been added to the asm parser (it seems that
there was no test case specifically covering this code, so I've added one).
3. The list of Altivec registers, which was common to all calling conventions,
has been separated out. This allows us to define the base CSR lists, and then
lists for each ABI with Altivec included. This allows SjLj, for example, to
work correctly on non-Altivec targets without using unnatural definitions of
the NoRegs CSR list.
4. VRSAVE is now always reserved on non-Darwin targets and all Altivec
registers are reserved when Altivec is disabled.
With these changes, it is now possible to compile a function containing
__builtin_unwind_init() on Linux/PPC64 with debugging information. This did not
work previously because GNU binutils assumes that all .cfi_offset offsets will
be 8-byte aligned on PPC64 (and errors out if you provide a non-8-byte-aligned
offset). This is not true for the vrsave register, however, because this
register is used only on Darwin, GCC does not bother printing a .cfi_offset
entry for it (even though there is a slot in the stack frame for it as
specified by the ABI). This change allows us to do the same: we will also not
print .cfi_offset directives for vrsave.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185409 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for TLS data relocations and modifiers:
.quad target@dtpmod
.quad target@tprel
.quad target@dtprel
Currently exploited by the asm parser only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185394 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for all missing condition register logical
instructions and extended mnemonics to the asm parser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185387 91177308-0d34-0410-b5e6-96231b3b80d8
A @got reference must always result in a relocation, so that
the linker has a chance to set up the GOT entry, even if the
symbol happens to be local.
Add a PPCELFObjectWriter::ExplicitRelSym routine that enforces
a relocation to be emitted for GOT references.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185353 91177308-0d34-0410-b5e6-96231b3b80d8
The test case had a couple of FIXMEs where the instruction is in
fact already supported by the back-end. In some other case, while
the generic form of the instruction is not yet supported, a
specialized form is. This adds tests for those already supported
instructions / instruction forms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185347 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the "sync $L" instruction with operand,
and provides aliases for "lwsync" and "ptesync".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185344 91177308-0d34-0410-b5e6-96231b3b80d8
The assembler currently strictly verifies that immediates for
s16imm operands are in range (-32768 ... 32767). This matches
the behaviour of the GNU assembler, with one exception: gas
allows, as a special case, operands in an extended range
(-65536 .. 65535) for the addis instruction only (and its
extended mnemonic lis).
The main reason for this seems to be to allow using unsigned
16-bit operands for lis, e.g. like lis %r1, 0xfedc.
Since this has been supported by gas for a long time, and
assembler source code seen "in the wild" actually exploits
this feature, this patch adds equivalent support to LLVM
for compatibility reasons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184946 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, all instructions taking s16imm operands support symbolic
operands. However, for u16imm operands, we only support actual
immediate integers. This causes the assembler to reject code like
ori %r5, %r5, symbol@l
This patch changes the u16imm operand definition to likewise
accept symbolic operands. In fact, s16imm and u16imm can
share the same encoding routine, now renamed to getImm16Encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184944 91177308-0d34-0410-b5e6-96231b3b80d8
