This change fixes a bug that I introduced in r178058. After a register is
scavenged using one of the available spills slots the instruction defining the
virtual register needs to be moved to after the spill code. The scavenger has
already processed the defining instruction so that registers killed by that
instruction are available for definition in that same instruction. Unfortunately,
after this, the scavenger needs to iterate through the spill code and then
visit, again, the instruction that defines the now-scavenged register. In order
to avoid confusion, the register scavenger needs the ability to 'back up'
through the spill code so that it can again process the instructions in the
appropriate order. Prior to this fix, once the scavenger reached the
just-moved instruction, it would assert if it killed any registers because,
having already processed the instruction, it believed they were undefined.
Unfortunately, I don't yet have a small test case. Thanks to Pranav Bhandarkar
for diagnosing the problem and testing this fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178845 91177308-0d34-0410-b5e6-96231b3b80d8
For now, just save the compile time since the ConvergingScheduler
heuristics don't use this analysis. We'll probably enable it later
after compile-time investigation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178822 91177308-0d34-0410-b5e6-96231b3b80d8
Pass down the fact that an operand is going to be a vector of constants.
This should bring the performance of MultiSource/Benchmarks/PAQ8p/paq8p on x86
back. It had degraded to scalar performance due to my pervious shift cost change
that made all shifts expensive on x86.
radar://13576547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178809 91177308-0d34-0410-b5e6-96231b3b80d8
SSE2 has efficient support for shifts by a scalar. My previous change of making
shifts expensive did not take this into account marking all shifts as expensive.
This would prevent vectorization from happening where it is actually beneficial.
With this change we differentiate between shifts of constants and other shifts.
radar://13576547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178808 91177308-0d34-0410-b5e6-96231b3b80d8
On certain architectures we can support efficient vectorized version of
instructions if the operand value is uniform (splat) or a constant scalar.
An example of this is a vector shift on x86.
We can efficiently support
for (i = 0 ; i < ; i += 4)
w[0:3] = v[0:3] << <2, 2, 2, 2>
but not
for (i = 0; i < ; i += 4)
w[0:3] = v[0:3] << x[0:3]
This patch adds a parameter to getArithmeticInstrCost to further qualify operand
values as uniform or uniform constant.
Targets can then choose to return a different cost for instructions with such
operand values.
A follow-up commit will test this feature on x86.
radar://13576547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178807 91177308-0d34-0410-b5e6-96231b3b80d8
There is a difference for FORM_ref_addr between DWARF 2 and DWARF 3+.
Since Eric is against guarding DWARF 2 ref_addr with DarwinGDBCompat, we are
still in discussion on how to handle this.
The correct solution is to update our header to say version 4 instead of version
2 and update tool chains as well.
rdar://problem/13559431
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178806 91177308-0d34-0410-b5e6-96231b3b80d8
BCL is normally a conditional branch-and-link instruction, but has
an unconditional form (which is used in the SjLj code, for example).
To make clear that this BCL instruction definition is specifically
the special unconditional form (which does not meaningfully take
a condition-register input), rename it to BCLalways.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178803 91177308-0d34-0410-b5e6-96231b3b80d8
The DAGCombine logic that recognized a/sqrt(b) and transformed it into
a multiplication by the reciprocal sqrt did not handle cases where the
sqrt and the division were separated by an fpext or fptrunc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178801 91177308-0d34-0410-b5e6-96231b3b80d8
It fixes following tests for Hexagon:
CodeGen/Generic/2003-07-29-BadConstSbyte.ll
CodeGen/Generic/2005-10-21-longlonggtu.ll
CodeGen/Generic/2009-04-28-i128-cmp-crash.ll
CodeGen/Generic/MachineBranchProb.ll
CodeGen/Generic/builtin-expect.ll
CodeGen/Generic/pr12507.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178794 91177308-0d34-0410-b5e6-96231b3b80d8
OpndPtrs stored pointers into the Opnd vector that became invalid when the
vector grows. Store indices instead. Sadly I only have a large testcase that
only triggers under valgrind, so I didn't include it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178793 91177308-0d34-0410-b5e6-96231b3b80d8
It had been dropped during the switch to yaml::IO. Also add a test going
from yaml2obj to llvm-readobj. It can be extended as we add more
fields/formats to yaml2obj.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178786 91177308-0d34-0410-b5e6-96231b3b80d8
At the time when the XCore backend was added there were some issues with
with overlapping register classes but these all seem to be fixed now.
Describing the register classes correctly allow us to get rid of a
codegen only instruction (LDAWSP_lru6_RRegs) and it means we can
disassemble ru6 instructions that use registers above r11.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178782 91177308-0d34-0410-b5e6-96231b3b80d8
The Thumb2SizeReduction pass avoids false CPSR dependencies, except it
still aggressively creates tMOVi8 instructions because they are so
common.
Avoid creating false CPSR dependencies even for tMOVi8 instructions when
the the CPSR flags are known to have high latency. This allows integer
computation to overlap floating point computations.
Also process blocks in a reverse post-order and propagate high-latency
flags to successors.
<rdar://problem/13468102>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178773 91177308-0d34-0410-b5e6-96231b3b80d8
This requires v9 cmov instructions using the %xcc flags instead of the
%icc flags.
Still missing:
- Select floats on %xcc flags.
- Select i64 on %fcc flags.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178737 91177308-0d34-0410-b5e6-96231b3b80d8
Looks like cmake on windows is not expanding ENABLE_EXPORTS to
-Wl,--export-all-symbols on mingw or cygwin, so add this back.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178730 91177308-0d34-0410-b5e6-96231b3b80d8
On freebsd this makes sure that symbols are exported on the binaries that need
them. The net result is that we should get symbols in the binaries that need
them on every platform.
On linux x86-64 this reduces the size of the bin directory from 262MB to 250MB.
Patch by Stephen Checkoway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178725 91177308-0d34-0410-b5e6-96231b3b80d8
the target system.
It was hard-coded to 4 bytes before. I can't get llvm to generate a
ref_addr on a reasonably sized testing case.
rdar://problem/13559431
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178722 91177308-0d34-0410-b5e6-96231b3b80d8
Cleaned up trailing whitespace and added extra slashes in front of a
function level comment so that it follow the convention of having 3
slashes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178712 91177308-0d34-0410-b5e6-96231b3b80d8
