- Clean up the code generated by tablegen:
* AddToISelQueue now takes one argument.
* ComplexPattern matching condition can now be shared.
* Eliminate passing unnecessary arguments to emit routines.
* Eliminate some unneeded SDOperand declarations in select routines.
* Other minor clean ups.
- This reduces foot print slightly: X86ISelDAGToDAG.o is reduced from 971k
to 823k.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29892 91177308-0d34-0410-b5e6-96231b3b80d8
code that emit target specific nodes into emit functions that are uniquified
and shared among selection routines.
e.g. This reduces X86ISelDAGToDAG.o (release) from ~2M to ~1.5M. Stack frame
size of Select_store from ~13k down to ~8k.
This is the first step. Further work to enable more sharing will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29158 91177308-0d34-0410-b5e6-96231b3b80d8
intrinsics that don't take pointer arguments now work. For example, we can
compile this:
int test3( __m128d *A) {
return _mm_movemask_pd(*A);
}
int test4( __m128 *A) {
return _mm_movemask_ps(*A);
}
to this:
_test3:
movl 4(%esp), %eax
movapd (%eax), %xmm0
movmskpd %xmm0, %eax
ret
_test4:
movl 4(%esp), %eax
movaps (%eax), %xmm0
movmskps %xmm0, %eax
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27090 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction patterns do not contain enough information to resolve the
exact type of the destination if it of a generic vector type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26892 91177308-0d34-0410-b5e6-96231b3b80d8
due to ordering issue. i.e. they were selected for chain use first.
Now at load select time, check if it is being selected for a chain use and if
it has only a single real use. If so, return a HANDLENODE (with the load as
its operand) in its place and record it.
When it is folded or the load is selected for a real use, the isel records it
as the replacement for the HANDLENODE. The replacement is done when all nodes
are selected.
This scheme exposed a couple of problems where cycles can happen. (See comments
in EmitMatchCode() for descriptions of the problems and their workaround /
solutions.) These problems have been resolved with a small compile time
penality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25995 91177308-0d34-0410-b5e6-96231b3b80d8
SNDPOutFlag to DAG nodes. These properties do not belong to target specific
instructions.
* Added DAG node property SNDPOptInFlag. It's same as SNDPInFlag except it's
optional. Used by ret / call, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25154 91177308-0d34-0410-b5e6-96231b3b80d8
it has more than one real use (non-chain uses).
* Record folded chain producing node in CodeGenMap.
* Do not fold a chain producing node if it has already been selected as an
operand of a chain use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24647 91177308-0d34-0410-b5e6-96231b3b80d8
matching code that is not currently auto-generated by tblgen, e.g. X86
addressing mode. Selection routines for complex patterns can return multiple operands, e.g. X86 addressing mode returns 4.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24634 91177308-0d34-0410-b5e6-96231b3b80d8
* Enhanced tblgen to handle instructions which have chain operand and writes a
chain result.
* Enhanced tblgen to handle instructions which produces no results. Part of
the change is a temporary hack which relies on instruction property (e.g.
isReturn, isBranch). The proper fix would be to change the .td syntax to
separate results dag from ops dag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24587 91177308-0d34-0410-b5e6-96231b3b80d8
def SHL8rCL : I<0xD2, MRM4r, (ops R8 :$dst, R8 :$src),
"shl{b} {%cl, $dst|$dst, %CL}",
[(set R8:$dst, (shl R8:$src, CL))]>, Imp<[CL],[]>;
This generates a CopyToReg operand and added its 2nd result to the shl as
a flag operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24557 91177308-0d34-0410-b5e6-96231b3b80d8
ValueType from the RegisterClass or Operands. This step is necessary to
allow RegisterClasses to have multiple ValueTypes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24555 91177308-0d34-0410-b5e6-96231b3b80d8
tblgen: In ZAPNOTi: Cannot use 'IZAPX' in an input pattern!
for a bad pattern, instead of an ugly assertion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23854 91177308-0d34-0410-b5e6-96231b3b80d8
1. If an operation has to be int or fp and the target only supports one
int or fp type, relize that the op has to have that type.
2. If a target has operations on multiple types, do not emit matching code
for patterns involving those operators, since we do not emit the code to
check for them yet. This prevents PPC from generating FP ops currently.
Also move some code around into more logical places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23724 91177308-0d34-0410-b5e6-96231b3b80d8
doesn't have to specify them manually. It currently handles associativity,
e.g. knowing that (X*Y)+Z also matches X+(Y*Z) and will be extended in
the future.
It is smart enough to not introduce duplicate patterns or patterns that can
never match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23526 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we check that immediate values live on the RHS of commutative
operators. Defining ORI like this, for example:
def ORI : DForm_4<24, (ops GPRC:$dst, GPRC:$src1, u16imm:$src2),
"ori $dst, $src1, $src2",
[(set GPRC:$dst, (or immZExt16:$src2, GPRC:$src1))]>;
results in:
tblgen: In ORI: Instruction can never match: Immediate values must be on the RHS of commutative operators!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23501 91177308-0d34-0410-b5e6-96231b3b80d8
This does not check that types match yet, but PPC only has one integer type
;-).
This also doesn't have the code to build the resultant dag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23414 91177308-0d34-0410-b5e6-96231b3b80d8
