* Check for availability of ffsll call in configure script
* Support ffs, ffsl, and ffsll conversion to constant value if the argument
is constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22027 91177308-0d34-0410-b5e6-96231b3b80d8
script was defaulting the LLVMGCC variable to "llvm-gcc" if it couldn't
find llvm-gcc and --with-llvmgccdir was not specified. In this case, there
is no llvm-gcc available on the system so we shouldn't assume that the
user's path will find it any better than configure could. The fix is to
default it to an empty string. If LLVMGCC is empty, the makefiles will
avoid building things that depend on llvm-gcc and give a nice warning
message to that effect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21953 91177308-0d34-0410-b5e6-96231b3b80d8
--enable-target which can take values "all", "host-only" or a comma
separated list of target names (alpha,ia64,powerpc,skeleton,sparc,x86)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21447 91177308-0d34-0410-b5e6-96231b3b80d8
options have been added to the configure script that control which targets
will be used. The options are:
--enable-target-this (default=disabled)
This will specify that the target corresponding to the build host is
the target that will be compiled/used. You can't use this with any of
the other options (they'll be ignored). This is what most people want.
--disable-target-x86 (default=enabled)
This will prevent the X86 target(s) from being compiled/used.
--disable-target-sparc (default=enabled)
This will prevent both SparcV8 and SparcV9 from being compiled/used.
--disable-target-powerpc (default=enabled)
This will prevent the PowerPC target from being compiled/used.
--disable-target-alpha (default=enabled)
This will prevent the Alpha target from being compiled/used.
--disable-target-ia64 (default=enabled)
This will prevent the IA64 target from being compiled/used.
Note that without any of these options, the default behavior is to build
all targets, as is the current practice.
All these options do is set up the substititution variable TARGETS_TO_BUILD
which contains the targets that should be compiled/used. The variable is
intended to be used in the makefiles. Those changes will come later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21445 91177308-0d34-0410-b5e6-96231b3b80d8
in the config.status script. This allows the AC_CONFIG_MAKEFILE macro to
work properly after it was changed to support sub-projects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20305 91177308-0d34-0410-b5e6-96231b3b80d8
is in ${srcdir}/autoconf because that is only true if the project is LLVM.
For other projects (e.g. sample), we don't want to have to distribute the
mkinstalldirs or install-sh programs because it opens a window of breakage
for projects. So, this change requires that the llvm_src variable be set
up via another AC_CONFIG_COMMANDS call. For LLVM this is done in the
configure.ac. For projects its done in the LLVM_CONFIG_PROJECT macro.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20304 91177308-0d34-0410-b5e6-96231b3b80d8
takes care of the --with-llvmsrc and --with-llvmobj options for the project
It was moved here from the project's configure.ac file because there is
some tricky handling of the llvm_src variable to tell the project where the
llvm source tree is (for mkinstalldirs and install-sh commands).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20303 91177308-0d34-0410-b5e6-96231b3b80d8
won't be propagated to the configure script until there's a need to change
configure.ac for some larger purpose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19762 91177308-0d34-0410-b5e6-96231b3b80d8
* Add CAN_DLOPEN_SELF so we can determine if dlopen(0) will open the
program or not.
* Correct a warning messages to be a little more specific on what it checks
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19184 91177308-0d34-0410-b5e6-96231b3b80d8
* Add checks for sterror and strerror_r functions
* Add check to determine if /dev/zero is needed for allocating RWX memory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19148 91177308-0d34-0410-b5e6-96231b3b80d8
* Make sure all headers used by lib/System have checks
* Use "standard" autoconf checks for certain problematic headers
For PR432:
* Resurrect --with-llvmgccdir so a specific llvm-gcc/llvm-g++ installation
can be specified.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19142 91177308-0d34-0410-b5e6-96231b3b80d8
Create new variables LLVM_ON_UNIX and LLVM_ON_WIN32 so we can start getting
rid of reliance upon a symbolic link to switch implementations in lib/System
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19131 91177308-0d34-0410-b5e6-96231b3b80d8
expands to a full path name. Substitute $outputname.exp" instead and it
makes a viable temporary file name. This gets around the problem with lli
on Cygwin linking but not having any "C" library functions linked into it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19123 91177308-0d34-0410-b5e6-96231b3b80d8
* Remove --with-llvmgccdir, not needed any more
* Search path for llvm-gcc and llvm-gxx
* Compute LLVMGCCDIR based on install path of llvm-gcc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19093 91177308-0d34-0410-b5e6-96231b3b80d8
* Don't search a bunch of .. directories for something we'd never find,
because we don't imbed tclsh into LLVM.
* Look for various tclsh versions because some platforms don't install the
tclsh link but just have tclsh8.3 or tclsh8.4 or some such.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18414 91177308-0d34-0410-b5e6-96231b3b80d8
names that have version numbers in it so this macro, DJ_AC_PATH_TCLSH will
make the necessary checks. The makefile variable TCLSH is set to the path
found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18382 91177308-0d34-0410-b5e6-96231b3b80d8
our own library so that it is magically hidden and we don't have to depend
on linking with -lltdl option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18342 91177308-0d34-0410-b5e6-96231b3b80d8
* organize programs we test for properly
* add new programs needed for documentation generation
* Adjust install paths so llvm stuff doesn't muck up /usr/local or /usr if
$prefix is set to those.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18327 91177308-0d34-0410-b5e6-96231b3b80d8
* cache more values
* standardize cache value names
* organize configure script per autoconf recommendations (10 sections)
* Eliminate some redundancies and complexities in the script
* Provide better documentation in the script.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18232 91177308-0d34-0410-b5e6-96231b3b80d8
tool runs Deja-gnu test suites. The 'make' variable RUNTEST is now set
automatically in the Makefile.config file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17599 91177308-0d34-0410-b5e6-96231b3b80d8
days of trying to figure it out. Despite some developer's penchant for
relaxing the tool versions, this just isn't possible. Only certain versions
work with certain other versions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16943 91177308-0d34-0410-b5e6-96231b3b80d8
version of the configure script. This is an early commit of the automake
support so that automake support can be tested on multiple platforms. Many
additional Makefile.am need to be added to LLVM before this is of any use.
Please wait until automake support is announced on llvmdev list before
using the --with-automake option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16837 91177308-0d34-0410-b5e6-96231b3b80d8
from the fray, so it gets noticed. This commit is made without the
corresponding configure script commit because it doesn't affect
functionality and we don't want to force everyone into another reconfigure
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16657 91177308-0d34-0410-b5e6-96231b3b80d8
from being re-generated if the new version is identical to the old version.
Hence, it should save us some recompiling after re-configures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16506 91177308-0d34-0410-b5e6-96231b3b80d8
Instead just create a warning message that says the directory cannot be
configured because it isn't recognized. This also gets rid of a bunch of
warning messages from the auto* tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16463 91177308-0d34-0410-b5e6-96231b3b80d8
function, not the whole main function. This problem resulted during
conversion of scripts to the new autoconf standard. The effect was that
the mmap_file test would fail and if it does there is currently an
#ifdef'd #error that causes compilation to fail. Bad, bad, bad.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16462 91177308-0d34-0410-b5e6-96231b3b80d8
necessary to ensure that a consistent configuration is created on each
platform. Certain definitions we use (like m4/libtool.m4) require certain
versions of the tools and we can no longer be slack about this or we'll
have problems with mis-configured builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16412 91177308-0d34-0410-b5e6-96231b3b80d8
This is a potential version mismatch problem because this file came from
libtool 1.5.10. If you're running a different version of libtool, the
checks in this file may not be quite right. Having our own version of this
file violates the spirit of libtool and is only provided to change the name
of "libtool" to "mklib". This is done so that the name "libtool" does not
conflict with the "lib" directory when doing tab completion and your
$objdir == $srcdir.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16411 91177308-0d34-0410-b5e6-96231b3b80d8
while still retaining the ability to configure unknown ones.
- Excise crud left over from when test/Projects was still part of the main
LLVM module. These removed tests are now all in
llvm-test/autoconf/configure.ac
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16230 91177308-0d34-0410-b5e6-96231b3b80d8
- Use the -I parameter to aclocal to tell it where the autoconf/m4
directory is located so it can find needed autoconf functions
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16225 91177308-0d34-0410-b5e6-96231b3b80d8
per the recommended style guide for autoconf and so that individual
autoconf functions can more easily be shared across projects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16223 91177308-0d34-0410-b5e6-96231b3b80d8
give preference to uint64_t if it exists. If not, check for u_int64_t. If
that doesn't exist either, then error out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16149 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
$BUILD_SRC_ROOT/lib/System/$build which gives us the ability to
configure the lib/System for the current type of operating system.
Also cleaned up some indentation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16082 91177308-0d34-0410-b5e6-96231b3b80d8
Add basic installation directories as AC_DEFINES and AC_SUBST so they can
be used by llvm programs with a simple #include <Config/config.h>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@15942 91177308-0d34-0410-b5e6-96231b3b80d8
DataTypes.h. So far, it doesn't seem to break Linux, Solaris, or MacOS X.
This should automatically include it for those people who need it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@15006 91177308-0d34-0410-b5e6-96231b3b80d8
a hack that allows users to fight through a build if they don't have mmap().
When I get into the office, I'll make something better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13801 91177308-0d34-0410-b5e6-96231b3b80d8
Remove checks for many common Unix programs. Our build process currently
assumes they are there and makes no provisions for any other world-views.
(We can add some of these checks back at some later time if it should prove
useful, but right now, we do not need to check to see whether "rm" exists.)
Remove checks for many common standard C headers and functions. We assume
ISO/ANSI C++, and we always use the <cfoo> versions of ANSI C's <foo.h>
headers, so these checks will not help anything.
Edit configure's warning messages for clarity and content.
Change checks for "optional" programs to default to using "true" instead of
"false", so that a failure to find, e.g., etags, will be less likely to result
in make failing.
No longer shall we check for --enable-purify or --with-purify options.
No longer shall we propagate these to the Makefiles.
configure regenerated using autoconf-2.57.
Please feel free to send me any questions or comments you have. :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10814 91177308-0d34-0410-b5e6-96231b3b80d8
YACC as bison -y. In this way, we ensure that bison is being used, but
the Makefiles have macros for using bison itself and for getting bison to
act like it is traditional yacc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10774 91177308-0d34-0410-b5e6-96231b3b80d8
do the following:
% cd llvm/autoconf
% aclocal
% autoconf -o ../configure
This changes facilitaties the following:
1) It should be easier to incorporate new autoconf macros.
2) It allows for conversion to Automake (should we ever desire it).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10655 91177308-0d34-0410-b5e6-96231b3b80d8
The autoconf program will generate a warning about how we should use a
literal in AC_CONFIG_SUBDIRS. This warning can be ignored.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10222 91177308-0d34-0410-b5e6-96231b3b80d8
object tree if it is missing. This means that new Makefiles should get
picked up automagically, requiring less bothersome re-configuring after
updates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10209 91177308-0d34-0410-b5e6-96231b3b80d8
Set OS (build OS) and ARCH (target arch) based on the proper elements (SYSTEM,
and CPU, respectively) of the CPU-COMPANY-SYSTEM tuples.
Add OS and ARCH settings for PowerPC/Darwin (Mac OS X).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10047 91177308-0d34-0410-b5e6-96231b3b80d8
Only warn if python version is not right; don't abort.
Add sanity checks for --with-llvmgccdir, with a big warning message at the end.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10024 91177308-0d34-0410-b5e6-96231b3b80d8
Check for strsignal(), which isn't found everywhere, and sys_siglist,
which can be used to implement it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8973 91177308-0d34-0410-b5e6-96231b3b80d8
The pathname to SPEC2000 is now given with the -use-spec2000 option.
On our machines, SPEC2000 will be enabled by default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8949 91177308-0d34-0410-b5e6-96231b3b80d8
1) MAP_FAILED is declared to be a pointer
2) can't include sys/mman.h before sys/types.h without getting an error :-(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8947 91177308-0d34-0410-b5e6-96231b3b80d8
Adding new qmt files should no longer be necessary.
QMTest should know just "magically" know what sort of test each file is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8945 91177308-0d34-0410-b5e6-96231b3b80d8
error message. This should hopefully allow our nightly tester to run, which
does not run the QMTest tests at present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8691 91177308-0d34-0410-b5e6-96231b3b80d8
The QMTest program can then use that as the location for loading test and
resource class, thus compiling the Python code into the object root as
desired.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8551 91177308-0d34-0410-b5e6-96231b3b80d8
already. This should help prevent strange errors from happening, but will
make re-configuring the source directory more difficult when it is shared with
the object directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8539 91177308-0d34-0410-b5e6-96231b3b80d8
Added the AC_CONFIG_MAKEFILE macro to configure akefiles which don't need .in
templates.
Removed the --with-objroot option.
Added commands to configure.ac to configure all of the LLVM Makefiles. Oof.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8378 91177308-0d34-0410-b5e6-96231b3b80d8
1. If USER is defined and localhome/$USER is a directory, set OBJ_ROOT
to /localhome/$USER
2. Otherwise, set OBJ_ROOT to .
This should hopefully fix the nightly tester.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7451 91177308-0d34-0410-b5e6-96231b3b80d8
Select /localhome/$USER when it exists.
Fix the checks for bidirectional and forward iterators so that they work with
version of GCC prior to 3.x.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7383 91177308-0d34-0410-b5e6-96231b3b80d8
the *action-if-not-given* code when the --disable option is used.
Rather, the AC_ARG_ENABLE macro sets the $enableval variable, which then needs
to be checked to determine if --enable, --disable, or neither was specified.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@7238 91177308-0d34-0410-b5e6-96231b3b80d8
