generates the dwarf Compile Unit DIE and a dwarf subprogram DIE for each
non-temporary label.
The next part will be to get the clang driver to enable this when assembling
a .s file. rdar://9275556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146262 91177308-0d34-0410-b5e6-96231b3b80d8
-g flag. In this part we generate the .file for the source being assembled and
the .loc's for the assembled instructions.
The next part will be to generate the dwarf Compile Unit DIE and a dwarf
subprogram DIE for each non-temporary label.
Once the next part is done test cases will be added. rdar://9275556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143509 91177308-0d34-0410-b5e6-96231b3b80d8
.file filenumber "directory" "filename"
This removes one join+split of the directory+filename in MC internals. Because
bitcode files have independent fields for directory and filenames in debug info,
this patch may change the .o files written by existing .bc files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142300 91177308-0d34-0410-b5e6-96231b3b80d8
the X86 asmparser to produce ranges in the one case that was annoying me, for example:
test.s:10:15: error: invalid operand for instruction
movl 0(%rax), 0(%edx)
^~~~~~~
It should be straight-forward to enhance filecheck, tblgen, and/or the .ll parser to use
ranges where appropriate if someone is interested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142106 91177308-0d34-0410-b5e6-96231b3b80d8
for cpp pre-processed assembly we give correct filename and line numbers when
reporting errors in assembly files when using clang and -integrated-as on .s
files. rdar://8998895
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141814 91177308-0d34-0410-b5e6-96231b3b80d8
Assembler private local symbols aren't legal targets of symbol attributes,
so issue a diagnostic for them.
Based on patch by Stepan Dyatkovskiy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139807 91177308-0d34-0410-b5e6-96231b3b80d8
If we see an EOF w/o a preceding end-of-line, return an EndOfStatement
token before returning the Eof token.
Based on patch by Stepan Dyatkovskiy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139798 91177308-0d34-0410-b5e6-96231b3b80d8
#line directives with the needed support in the lexer. Next will be to build
a simple file/line# table mapping source SMLoc's for later use by diagnostics.
And the last step will be to get the diagnostics to use the mapping for file
and line numbers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139669 91177308-0d34-0410-b5e6-96231b3b80d8
specified in the same file that the library itself is created. This is
more idiomatic for CMake builds, and also allows us to correctly specify
dependencies that are missed due to bugs in the GenLibDeps perl script,
or change from compiler to compiler. On Linux, this returns CMake to
a place where it can relably rebuild several targets of LLVM.
I have tried not to change the dependencies from the ones in the current
auto-generated file. The only places I've really diverged are in places
where I was seeing link failures, and added a dependency. The goal of
this patch is not to start changing the dependencies, merely to move
them into the correct location, and an explicit form that we can control
and change when necessary.
This also removes a serialization point in the build because we don't
have to scan all the libraries before we begin building various tools.
We no longer have a step of the build that regenerates a file inside the
source tree. A few other associated cleanups fall out of this.
This isn't really finished yet though. After talking to dgregor he urged
switching to a single CMake macro to construct libraries with both
sources and dependencies in the arguments. Migrating from the two macros
to that style will be a follow-up patch.
Also, llvm-config is still generated with GenLibDeps.pl, which means it
still has slightly buggy dependencies. The internal CMake
'llvm-config-like' macro uses the correct explicitly specified
dependencies however. A future patch will switch llvm-config generation
(when using CMake) to be based on these deps as well.
This may well break Windows. I'm getting a machine set up now to dig
into any failures there. If anyone can chime in with problems they see
or ideas of how to solve them for Windows, much appreciated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136433 91177308-0d34-0410-b5e6-96231b3b80d8
The .local, .hidden, .internal, and .protected are not legal for all supported
file formats (in particular, they're invalid for MachO). Move the parsing for
them into the ELF assembly parser since that's the format they're for.
Similarly, .weak is used by COFF and ELF, but not MachO, so move the parsing
to the COFF and ELF asm parsers. Previously, using any of these directives
on Darwin would result in an assertion failure in the parser; now we get
a diagnostic as we should.
rdar://9827089
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135921 91177308-0d34-0410-b5e6-96231b3b80d8
There is still a bit more refactoring left to do in Targets. But we are now very
close to fixing all the layering issues in MC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135611 91177308-0d34-0410-b5e6-96231b3b80d8
TargetLoweringObjectFileImpl down to MCObjectFileInfo.
TargetAsmInfo is done to one last method. It's *almost* gone!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135569 91177308-0d34-0410-b5e6-96231b3b80d8
to MCRegisterInfo. Also initialize the mapping at construction time.
This patch eliminate TargetRegisterInfo from TargetAsmInfo. It's another step
towards fixing the layering violation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135424 91177308-0d34-0410-b5e6-96231b3b80d8
Update the debug output interface for MCParsedAsmOperand to have a print()
method which takes an output stream argument, an << operator which invokes
the print method using the given stream, and a dump() method which prints
the operand to the dbgs() stream. This makes the interface more consistent
with the rest of LLVM, and more convenient to use at the debugger command
line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135043 91177308-0d34-0410-b5e6-96231b3b80d8
For example, ".byte 256" would previously assert() when emitting an object
file. Now it generates a diagnostic that the literal value is out of range.
rdar://9686950
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134069 91177308-0d34-0410-b5e6-96231b3b80d8
Re-apply 133010, with fixes for inline assembler.
Original commit message:
"When an assembler local symbol is used but not defined in a module, a
Darwin assembler wants to issue a diagnostic to that effect."
Added fix to only perform the check when finalizing, as otherwise we're not
done and undefined symbols may simply not have been encountered yet.
Passes "make check" and a self-host check on Darwin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133071 91177308-0d34-0410-b5e6-96231b3b80d8
When an assembler local symbol is used but not defined in a module, a
Darwin assembler wants to issue a diagnostic to that effect.
rdar://9559714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@133010 91177308-0d34-0410-b5e6-96231b3b80d8
Parsing a register name/number for .cfi directives can't assume that a
register name starts with a '%' token. Be more flexible and check for a
register number instead. Still unlikely to be perfect, but it allows us
to parse both plain identifiers as register names and integers as register
numbers, which is what we're wanting to support at this point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132466 91177308-0d34-0410-b5e6-96231b3b80d8
them.
I had to add a special SwitchSectionNoChange method to MCStreamer just for
.seh_handlerdata. If this isn't OK, please let me know, and I'll find some
other way to fix .seh_handlerdata streaming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132084 91177308-0d34-0410-b5e6-96231b3b80d8
