It appears that the -filename-equivalence option for testing llvm-cov
doesn't work correctly with -show-expansions. I'm reverting this test
to get the bots green while I look into fixing that.
This partially reverts r217476
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217478 91177308-0d34-0410-b5e6-96231b3b80d8
This commit expands llvm-cov's functionality by adding support for a new code coverage
tool that uses LLVM's coverage mapping format and clang's instrumentation based profiling.
The gcov compatible tool can be invoked by supplying the 'gcov' command as the first argument,
or by modifying the tool's name to end with 'gcov'.
Differential Revision: http://reviews.llvm.org/D4445
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216300 91177308-0d34-0410-b5e6-96231b3b80d8
Make llvm-cov compatible with gcov for cases where multiple files are
specified on the command line. That is, loop over each one and report
coverage, and report errors on stderr only rather than via return
code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211959 91177308-0d34-0410-b5e6-96231b3b80d8
All tests in test/tools/llvm-cov fail on big-endian targets and are
supposed to be XFAILed there. However, including "powerpc64" in the
XFAIL line is now incorrect, since that matches both powerpc64- and
powerpc64le- targets, and the tests pass on the latter.
Update the XFAIL lines to use powerpc64- instead (like mips64-).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211172 91177308-0d34-0410-b5e6-96231b3b80d8
If the source files referenced by a gcno file are missing, gcov
outputs a coverage file where every line is simply /*EOF*/. This also
occurs for lines in the coverage that are past the end of a file that
is found.
This change mimics gcov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208149 91177308-0d34-0410-b5e6-96231b3b80d8
In gcov, there's a -n/--no-output option, which disables the writing
of any .gcov files, so that it emits only the summary info on stdout.
This implements the same behaviour in llvm-cov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208148 91177308-0d34-0410-b5e6-96231b3b80d8
Reading line tables in llvm-cov was pretty broken, but would happen to
work as long as no line in the table was 0. It's not clear to me
whether a line of zero *should* show up in these tables, but deciding
to read a string in the middle of the line table is certainly the
wrong thing to do if it does.
I've also added some comments, as trying to figure out what this block
of code was doing was fairly unpleasant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207866 91177308-0d34-0410-b5e6-96231b3b80d8
GCOV provides an option to prepend output file names with the source
file name, to disambiguate between covered data that's included from
multiple sources. Add a flag to llvm-cov that does the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207035 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-cov tests are sensitive to line number changes, so putting this
at the end will limit churn when we fix the XFAIL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204871 91177308-0d34-0410-b5e6-96231b3b80d8
Functions may in an instrumented binary but not in the original source
when they're inserted by the compiler or the runtime. These functions
aren't meaningful to the user, so teach llvm-cov to skip over them
instead of crashing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204863 91177308-0d34-0410-b5e6-96231b3b80d8
In gcov, the -o flag can accept either a directory or a file name.
When given a directory, the gcda and gcno files are expected to be in
that directory. When given a file, the gcda and gcno files are
expected to be named based on the stem of that file. Non-existent
paths are treated as files.
This implements compatible behaviour.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201555 91177308-0d34-0410-b5e6-96231b3b80d8
Until now, when a path in a gcno file included a directory, we would
emit our .gcov file in that directory, whereas gcov always emits the
file in the current directory. In doing so, this implements gcov's
strange name-mangling -p flag, which is needed to avoid clobbering
files when two with the same name exist in different directories.
The path mangling is a bit ugly and only handles unix-like paths, but
it's simple, and it doesn't make any guesses as to how it should
behave outside of what gcov documents. If we decide this should be
cross platform later, we can consider the compatibility implications
then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200754 91177308-0d34-0410-b5e6-96231b3b80d8
When gcov is run without gcda data, it acts as if the counts are all
zero and labels the file as - to indicate that there was no data. We
should do the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200740 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, llvm-cov isn't command-line compatible with gcov, which
accepts a source file name as its first parameter and infers the gcno
and gcda file names from that. This change keeps our -gcda and -gcno
options available for convenience in overriding this behaviour, but
adds the required parameter and inference behaviour as a compatible
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200417 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to the file summaries, the function summaries output line,
branching and call statistics. The file summaries have been moved
outside the initial loop so that all of the function summaries can be
outputted before file summaries.
Also updated test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197633 91177308-0d34-0410-b5e6-96231b3b80d8
File summaries will now be optionally outputted which will give line,
branching and call coverage info. Unfortunately, clang's current
instrumentation does not give enough information to deduce function
calls, something that gcc is able to do. Thus, no calls are always
outputted to be consistent with gcov output.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197606 91177308-0d34-0410-b5e6-96231b3b80d8
This will cause llvm-cov to output branch counts instead of branch
probabilities. -b must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197594 91177308-0d34-0410-b5e6-96231b3b80d8
Outputs branch information for unconditional branches in addition to
conditional branches. -b option must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197432 91177308-0d34-0410-b5e6-96231b3b80d8
This option tells llvm-cov to print out branch probabilities when
a basic block contains multiple branches. It also prints out some
function summary info including the number of times the function enters,
the percent of time it returns, and how many blocks were executed.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197198 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to gcov, llvm-cov will now print out the block count at the end
of each block. Multiple blocks can end on the same line.
One computational difference is by using -a, llvm-cov will no longer
simply add the block counts together to form a line count. Instead, it
will take the maximum of the block counts on that line. This has a
similar effect to what gcov does, but generates more correct counts in
certain scenarios.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196856 91177308-0d34-0410-b5e6-96231b3b80d8
This currently breaks clang/test/CodeGen/code-coverage.c. The root cause
is that the newly introduced access to Funcs[j] is out of bounds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196365 91177308-0d34-0410-b5e6-96231b3b80d8
Copy all test files to temporary directory, not just test.* files. Tests
didn't fail because the missing files occurred in XFAILS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196305 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that in some build systems, tests are executed in a
non-writable directory. Hopefully, this finally fixes the issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196256 91177308-0d34-0410-b5e6-96231b3b80d8
With r196184, llvm-cov creates a new file right next to the input file.
However, the Inputs-directory can't simply be assumed to be writable
under all build systems.
Also, this prevents a new source file from showing up in the source tree
if the test aborts before the call to "rm".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196228 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of asking the user to specify a single file to output coverage
info and defaulting to STDOUT, llvm-cov now creates files for each
source file with a naming system of: <source filename> + ".llcov".
This is what gcov does and although it can clutter the working directory
with numerous coverage files, it will be easier to hook the llvm-cov
output to tools which operate on this assumption (such as lcov).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196184 91177308-0d34-0410-b5e6-96231b3b80d8
XFAIL llvm-cov.test for MIPS until big-endian issues are fixed for llvm-cov.
The test does pass on MIPS little-endian.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195966 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of permanently outputting "MVLL" as the file checksum, clang
will create gcno and gcda checksums by hashing the destination block
numbers of every arc. This allows for llvm-cov to check if the two gcov
files are synchronized.
Regenerated the test files so they contain the checksum. Also added
negative test to ensure error when the checksums don't match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195191 91177308-0d34-0410-b5e6-96231b3b80d8
According to the hazy gcov documentation, it appeared to be technically
possible for lines within a block to belong to different source files.
However, upon further investigation, gcov does not actually support
multiple source files for a single block.
This change removes a level of separation between blocks and lines by
replacing the StringMap of GCOVLines with a SmallVector of ints
representing line numbers. This also means that the GCOVLines class is
no longer needed.
This paves the way for supporting the "-a" option, which will output
block information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194637 91177308-0d34-0410-b5e6-96231b3b80d8
Unified the interface for read functions. They all return a boolean
indicating if the read from file succeeded. Functions that previously
returned the read value now store it into a variable that is passed in
by reference instead. Callers will need to check the return value to
detect if an error occurred.
Also added a new test which ensures that no assertions occur when file
contains invalid data. llvm-cov should return with error code 1 upon
failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194635 91177308-0d34-0410-b5e6-96231b3b80d8
This test compares the output of llvm-cov against a coverage file
generated by gcov. Currently, llvm-cov does not work on certain
platforms (namely big-endian architectures such as PowerPC, among
others). These platforms are marked as XFAIL for now, but will be fixed
later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194616 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r194451.
Not sure why the tests are failing on the buildbot. They run fine on my
local machine. Could it possibly be because of the endianness of the
architectures? The GCNO and GCDA files are little-endian encoded, and
llvm-cov expects it to remain that way. Is this a safe assumption?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194454 91177308-0d34-0410-b5e6-96231b3b80d8
