not define a value that is used outside of it's block. This catches many
more simplifications, e.g. 854 in 176.gcc, 137 in vpr, etc.
This implements branch-phi-thread.ll:test3.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23397 91177308-0d34-0410-b5e6-96231b3b80d8
control across branches with determined outcomes. More generality to follow.
This triggers a couple thousand times in specint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23391 91177308-0d34-0410-b5e6-96231b3b80d8
a problem in LoopStrengthReduction, where it would split critical edges
then confused itself with outdated loop information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22776 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, just update the BB in-place. This is both faster, and it prevents
split-critical-edges from shuffling the PHI argument list unneccesarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22765 91177308-0d34-0410-b5e6-96231b3b80d8
into just Y. This often occurs when it seperates loops that have collapsed loop
headers. This implements LoopSimplify/phi-node-simplify.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22746 91177308-0d34-0410-b5e6-96231b3b80d8
BasicBlock's removePredecessor routine. This requires shuffling around
the definition and implementation of hasContantValue from Utils.h,cpp into
Instructions.h,cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22664 91177308-0d34-0410-b5e6-96231b3b80d8
consideration the case where a reference in an unreachable block could
occur. This fixes Transforms/SimplifyCFG/2005-08-01-PHIUpdateFail.ll,
something I ran into while bugpoint'ing another pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22584 91177308-0d34-0410-b5e6-96231b3b80d8
The optimization for locally used allocas was not safe for allocas that
were read before they were written. This change disables that optimization
in that case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22318 91177308-0d34-0410-b5e6-96231b3b80d8
a call. This fixes Prolangs-C++/deriv2, kimwitu++, and Misc-C++/bigfib
on X86 with -enable-x86-fastcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22023 91177308-0d34-0410-b5e6-96231b3b80d8
sinh, cosh, etc.
* Make the name comparisons for the fp libcalls a little more efficient by
switching on the first character of the name before doing comparisons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21611 91177308-0d34-0410-b5e6-96231b3b80d8
using Function::arg_{iterator|begin|end}. Likewise Module::g* -> Module::global_*.
This patch is contributed by Gabor Greif, thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20597 91177308-0d34-0410-b5e6-96231b3b80d8
This does a simple form of "jump threading", which eliminates CFG edges that
are provably dead. This triggers 90 times in the external tests, and
eliminating CFG edges is always always a good thing! :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20300 91177308-0d34-0410-b5e6-96231b3b80d8
SimplifyCFG is one of those passes that we use for final cleanup: it should
not rely on other passes to clean up its garbage. This fixes the "why are
trivially dead setcc's in the output of gccas" problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19212 91177308-0d34-0410-b5e6-96231b3b80d8
do not insert a prototype for malloc of: void* malloc(uint): on 64-bit u
targets this is not correct. Instead of prototype it as void *malloc(...),
and pass the correct intptr_t through the "...".
Finally, fix Regression/CodeGen/SparcV9/2004-12-13-MallocCrash.ll, by not
forming constantexpr casts from pointer to uint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18908 91177308-0d34-0410-b5e6-96231b3b80d8
if (x) {
code
...
} else {
code
...
}
Turn it into:
code
if (x) {
...
} else {
...
}
This reduces code size and in some common cases allows us to completely
eliminate the conditional. This turns several if/then/else blocks in loops
into straightline code in 179.art, turning the loops into single basic blocks
(good for modsched even!).
Maybe now brg will leave me alone ;-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18366 91177308-0d34-0410-b5e6-96231b3b80d8
Simplify code by simplifying terminators that branch to blocks that start
with an unreachable instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17116 91177308-0d34-0410-b5e6-96231b3b80d8
particular, invoke ret values are only live in the normal dest of the invoke
not in the unwind dest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17108 91177308-0d34-0410-b5e6-96231b3b80d8
If a function had no return instruction in it, and the result of the inlined
call instruction was used, we would crash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17104 91177308-0d34-0410-b5e6-96231b3b80d8
unneccesary. This allows us to delete several hundred phi nodes of the
form PHI(x,x,x,undef) from 253.perlbmk and probably other programs as well.
This implements Mem2Reg/UndefValuesMerge.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17098 91177308-0d34-0410-b5e6-96231b3b80d8
nodes unless we KNOW that we are able to promote all of them.
This fixes: test/Regression/Transforms/SimplifyCFG/PhiNoEliminate.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16973 91177308-0d34-0410-b5e6-96231b3b80d8
whose addresses where used by trivial phi nodes and select instructions. This
is now performed by the instcombine pass, which is more powerful, is much
simpler, and is faster. This allows the deletion of a bunch of code, two
FIXME's and two gotos.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16406 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
block (common in a switch), make sure to remove extra edges in successor
blocks. This fixes CodeExtractor/2004-08-12-BlockExtractPHI.ll and should
be pulled into LLVM 1.3 (though the regression test need not be, as that
would require pulling in the LoopExtract.cpp changes).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@15717 91177308-0d34-0410-b5e6-96231b3b80d8
This version takes about 1s longer than the previous one (down to 2.35s),
but on the positive side, it actually works :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14856 91177308-0d34-0410-b5e6-96231b3b80d8
This eliminates an N*N*logN algorithm from the loop simplify pass, replacing
it with a much simpler and faster alternative. In a debug build, this reduces
gccas time on eon from 85s to 42s.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14851 91177308-0d34-0410-b5e6-96231b3b80d8
since May 1st. In this code, the pred iterator was being invalidated sometimes
causing the wrong entries to be added to PHI nodes.
The fix for this is to defererence and safe the *PI value before we hack on
branch instructions, which changes use/def chains, which SOMETIMES invalidates
the iterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14278 91177308-0d34-0410-b5e6-96231b3b80d8
Fix another non-deterministic behavior, this one should actually speed up the
code though as it was doing silly things.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14258 91177308-0d34-0410-b5e6-96231b3b80d8
non-deterministic things like the ordering of blocks in the dominance
frontier of a BB. Unfortunately, I don't know of a better way to solve
this problem than to explicitly sort the BB's in function-order before
processing them. This is guaranteed to slow the pass down a bit, but
is absolutely necessary to get usable diffs between two different tools
executing the mem2reg or scalarrepl pass.
Before this, bazillions of spurious diff failures occurred all over the
place due to the different order of processing PHIs:
- %tmp.111 = getelementptr %struct.Connector_struct* %upcon.0.0, uint 0, uint 0
+ %tmp.111 = getelementptr %struct.Connector_struct* %upcon.0.1, uint 0, uint 0
Now, the diffs match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14244 91177308-0d34-0410-b5e6-96231b3b80d8
nondeterministic results that depend on where these objects land in memory.
Instead, sort by the value of the constant, which is stable.
Before this patch, the -simplifycfg pass run from two different compilers
could cause different code to be generated, though it was semantically the
same:
@@ -12258,8 +12258,8 @@
%s_addr.1 = phi sbyte* [ %s, %entry ], [ %inc.0, %no_exit ] ; <sbyte*> [#uses=5]
%tmp.1 = load sbyte* %s_addr.1 ; <sbyte> [#uses=1]
switch sbyte %tmp.1, label %no_exit [
- sbyte 0, label %loopexit
sbyte 46, label %loopexit
+ sbyte 0, label %loopexit
]
We need to stomp all of this stuff out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14243 91177308-0d34-0410-b5e6-96231b3b80d8
is write an autoconf macro that checks whether __isnan or isnan actually works
**using the C++ compiler after #include <cmath>**, instead of doing it the easy
way with AC_CHECK_FUNCS().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14171 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for acos/asin/atan. 188.ammp contains three calls to acos with
constant arguments. Constant folding it allows elimination of those 3 calls
and three FP divisions of the results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13821 91177308-0d34-0410-b5e6-96231b3b80d8
CloneTrace, and because it is primarily an operation on ValueMaps. It
is now a global (non-static) function which can be pulled in using
ValueMapper.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13600 91177308-0d34-0410-b5e6-96231b3b80d8
PHI node entries from multiple outside-the-region blocks. This also fixes
extraction of the entry block in a function. Yaay.
This has successfully block extracted all (but one) block from the score_move
function in obsequi (out of 33). Hrm, I wonder which block the bug is in. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13489 91177308-0d34-0410-b5e6-96231b3b80d8
* Add a stub for the severSplitPHINodes which will allow us to bbextract
bb's with PHI nodes in them soon.
* Remove unused arguments from findInputsOutputs
* Dramatically simplify the code in findInputsOutputs. In particular,
nothing really cares whether or not a PHI node is using something.
* Move moveCodeToFunction to after emitCallAndSwitchStatement as that's the
order they get called.
* Fix a bug where we would code extract a region that included a call to
vastart. Like 'alloca', calls to vastart must stay in the function that
they are defined in.
* Add some comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13482 91177308-0d34-0410-b5e6-96231b3b80d8
from the extracted region. If the return has 0 or 1 exit blocks, the new
function returns void. If it has 2 exits, it returns bool, otherwise it
returns a ushort as before.
This allows us to use a conditional branch instruction when there are two
exit blocks, as often happens during block extraction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13481 91177308-0d34-0410-b5e6-96231b3b80d8
1. Get rid of the silly abort block. When doing bb extraction, we get one
abort block for every block extracted, which is kinda annoying.
2. If the switch ends up having a single destination, turn it into an
unconditional branch.
I would like to add support for conditional branches, but to do this we will
want to have the function return a bool instead of a ushort.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13478 91177308-0d34-0410-b5e6-96231b3b80d8
structure to being dynamically computed on demand. This makes updating
loop information MUCH easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13045 91177308-0d34-0410-b5e6-96231b3b80d8
Basically we were using SimplifyCFG as a huge sledgehammer for a simple
optimization. Because simplifycfg does so many things, we can't use it
for this purpose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12977 91177308-0d34-0410-b5e6-96231b3b80d8
With this fix we now successfully extract all 149 loops from 256.bzip2 without
crashing or miscompiling the program!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12493 91177308-0d34-0410-b5e6-96231b3b80d8
1. Names were not put on the new arguments created (ok, this just helps sanity :)
2. Fix outgoing pointer values
3. Do not insert stores for values that had not been computed
4. Fix some wierd problems with the outset calculation
This fixes CodeExtractor/2004-03-14-DominanceProblem.ll, making the extractor
work on at least one simple case!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12484 91177308-0d34-0410-b5e6-96231b3b80d8
Simplify the input/output finder. All elements of a basic block are
instructions. Any used arguments are also inputs. An instruction can only
be used by another instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12405 91177308-0d34-0410-b5e6-96231b3b80d8
* Don't insert a branch to the switch instruction after the call, just
make it a single block.
* Insert the new alloca instructions in the entry block of the original
function instead of having them execute dynamically
* Don't make the default edge of the switch instruction go back to the switch.
The loop extractor shouldn't create new loops!
* Give meaningful names to the alloca slots and the reload instructions
* Some minor code simplifications
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12402 91177308-0d34-0410-b5e6-96231b3b80d8
This also implements a two minor improvements:
* Don't insert live-out stores IN the region, insert them on the code path
that exits the region
* If the region is exited to the same block from multiple paths, share the
switch statement entry, live-out store code, and the basic block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12401 91177308-0d34-0410-b5e6-96231b3b80d8
a member of the class. While we're at it, turn the collection into a set
instead of a vector to improve efficiency and make queries simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12400 91177308-0d34-0410-b5e6-96231b3b80d8
loop information won't see it, and we could have unreachable blocks pointing to
the non-header node of blocks in a natural loop. This isn't tidy, so have the
loopsimplify pass clean it up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12380 91177308-0d34-0410-b5e6-96231b3b80d8