FPROUND_F80_F32, FPROUND_PPCF128_F32,
FPROUND_F80_F64, FPROUND_PPCF128_F64
Support for soften float fp_round operands is added, Mips
needs this to round f64->f32.
Also added support to soften float FABS result, Mips doesn't
support double fabs results while in 'single float only' mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54484 91177308-0d34-0410-b5e6-96231b3b80d8
SINT_TO_FP libcall plus additional operations:
it might as well be a direct UINT_TO_FP libcall.
So only turn it into an SINT_TO_FP if the target
has special handling for SINT_TO_FP.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53461 91177308-0d34-0410-b5e6-96231b3b80d8
Lack of these caused a bootstrap failure with Fortran
on x86-64 with LegalizeTypes turned on. While there,
be nice to 16 bit machines and support expansion of
i32 too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53408 91177308-0d34-0410-b5e6-96231b3b80d8
For this it is convenient to permit floats to
be used with EXTRACT_ELEMENT, so I tweaked
things to allow that. I also added libcalls
for ppcf128 to i32 forms of FP_TO_XINT, since
they exist in libgcc and this case can certainly
occur (and does occur in the testsuite) - before
the i64 libcall was being used. Also, the
XINT_TO_FP result seemed to be wrong when
the argument is an i128: the wrong fudge
factor was added (the i32 and i64 cases were
handled directly, but the i128 code fell
through to some generic softening code which
seemed to think it was i64 to f32!). So I
fixed it by adding a fudge factor that I
found in my breakfast cereal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52739 91177308-0d34-0410-b5e6-96231b3b80d8
of apint codegen failure is the DAG combiner doing
the wrong thing because it was comparing MVT's using
< rather than comparing the number of bits. Removing
the < method makes this mistake impossible to commit.
Instead, add helper methods for comparing bits and use
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52098 91177308-0d34-0410-b5e6-96231b3b80d8
and better control the abstraction. Rename the type
to MVT. To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits(). Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52044 91177308-0d34-0410-b5e6-96231b3b80d8
ComputeMaskedBits handles, just use a 'default:'. This avoids
TargetLowering's list getting out of date with SelectionDAG's.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50693 91177308-0d34-0410-b5e6-96231b3b80d8
When choosing between constraints with multiple options,
like "ir", test to see if we can use the 'i' constraint and
go with that if possible. This produces more optimal ASM in
all cases (sparing a register and an instruction to load it),
and fixes inline asm like this:
void test () {
asm volatile (" %c0 %1 " : : "imr" (42), "imr"(14));
}
Previously we would dump "42" into a memory location (which
is ok for the 'm' constraint) which would cause a problem
because the 'c' modifier is not valid on memory operands.
Isn't it great how inline asm turns 'missed optimization'
into 'compile failed'??
Incidentally, this was the todo in
PowerPC/2007-04-24-InlineAsm-I-Modifier.ll
Please do NOT pull this into Tak.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50315 91177308-0d34-0410-b5e6-96231b3b80d8
- Make targetlowering.h fit in 80 cols.
- Make LowerAsmOperandForConstraint const.
- Make lowerXConstraint -> LowerXConstraint
- Make LowerXConstraint return a const char* instead of taking a string byref.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@50312 91177308-0d34-0410-b5e6-96231b3b80d8
on any current target and aren't optimized in DAGCombiner. Instead
of using intermediate nodes, expand the operations, choosing between
simple loads/stores, target-specific code, and library calls,
immediately.
Previously, the code to emit optimized code for these operations
was only used at initial SelectionDAG construction time; now it is
used at all times. This fixes some cases where rep;movs was being
used for small copies where simple loads/stores would be better.
This also cleans up code that checks for alignments less than 4;
let the targets make that decision instead of doing it in
target-independent code. This allows x86 to use rep;movs in
low-alignment cases.
Also, this fixes a bug that resulted in the use of rep;stos for
memsets of 0 with non-constant memory size when the alignment was
at least 4. It's better to use the library in this case, which
can be significantly faster when the size is large.
This also preserves more SourceValue information when memory
intrinsics are lowered into simple loads/stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49572 91177308-0d34-0410-b5e6-96231b3b80d8
If it cannot be expanded, it will keep the old behaviour and try to shrink the constant.
Part of enhancement for PR2191.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49280 91177308-0d34-0410-b5e6-96231b3b80d8
return ValueType can depend its operands' ValueType.
This is a cosmetic change, no functionality impacted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@48145 91177308-0d34-0410-b5e6-96231b3b80d8
generic & x86 versions; change generic to follow x86
and improve comments. Add PPC version (not right
for non-Darwin.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47734 91177308-0d34-0410-b5e6-96231b3b80d8
Change several cases in SimplifyDemandedMask that don't ever do any
simplifying to reuse the logic in ComputeMaskedBits instead of
duplicating it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47648 91177308-0d34-0410-b5e6-96231b3b80d8
the return value is zero-extended if it isn't
sign-extended. It may also be any-extended.
Also, if a floating point value was returned
in a larger floating point type, pass 1 as the
second operand to FP_ROUND, which tells it
that all the precision is in the original type.
I think this is right but I could be wrong.
Finally, when doing libcalls, set isZExt on
a parameter if it is "unsigned". Currently
isSExt is set when signed, and nothing is
set otherwise. This should be right for all
calls to standard library routines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47122 91177308-0d34-0410-b5e6-96231b3b80d8
1) ConstantFP is now expand by default
2) ConstantFP is not turned into TargetConstantFP during Legalize
if it is legal.
This allows ConstantFP to be handled like Constant, allowing for
targets that can encode FP immediates as MachineOperands.
As a bonus, fix up Itanium FP constants, which now correctly match,
and match more constants! Hooray.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47121 91177308-0d34-0410-b5e6-96231b3b80d8
Add an overload that supports the uint64_t interface for use by clients
that haven't been updated yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@47039 91177308-0d34-0410-b5e6-96231b3b80d8
and StoreSDNode into their common base class LSBaseSDNode. Member
functions getLoadedVT and getStoredVT are replaced with the common
getMemoryVT to simplify code that will handle both loads and stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46538 91177308-0d34-0410-b5e6-96231b3b80d8
1. Legalize now always promotes truncstore of i1 to i8.
2. Remove patterns and gunk related to truncstore i1 from targets.
3. Rename the StoreXAction stuff to TruncStoreAction in TLI.
4. Make the TLI TruncStoreAction table a 2d table to handle from/to conversions.
5. Mark a wide variety of invalid truncstores as such in various targets, e.g.
X86 currently doesn't support truncstore of any of its integer types.
6. Add legalize support for truncstores with invalid value input types.
7. Add a dag combine transform to turn store(truncate) into truncstore when
safe.
The later allows us to compile CodeGen/X86/storetrunc-fp.ll to:
_foo:
fldt 20(%esp)
fldt 4(%esp)
faddp %st(1)
movl 36(%esp), %eax
fstps (%eax)
ret
instead of:
_foo:
subl $4, %esp
fldt 24(%esp)
fldt 8(%esp)
faddp %st(1)
fstps (%esp)
movl 40(%esp), %eax
movss (%esp), %xmm0
movss %xmm0, (%eax)
addl $4, %esp
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@46140 91177308-0d34-0410-b5e6-96231b3b80d8
