Add HAVE_PTHREAD to makefiles with support from configure and use it to
determine whether to build examples/ParallelJIT.
Patch by Anton Korobeynikov.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32054 91177308-0d34-0410-b5e6-96231b3b80d8
premature, these libraries will be going away for the 2.0 release. Other
arrangements for profiling, gc, etc. should be made in the next few months.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31807 91177308-0d34-0410-b5e6-96231b3b80d8
stands a chance of being compiled with a non C99 C compiler. The default
is enabled so you must specifically disable this feature if you want the
CBE output compiled with an older C compiler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31461 91177308-0d34-0410-b5e6-96231b3b80d8
Demote check for bison from error to warning and make sure that the
makefile can handle an empty definition for BISON variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29861 91177308-0d34-0410-b5e6-96231b3b80d8
Fix problem setting the USE_{program} variable. It should be set to a
Makefile variable definition line, not just "1". Problem noted by
Kenneth Hoste.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29682 91177308-0d34-0410-b5e6-96231b3b80d8
Fix problem noticed by Kenneth Hoste. The wrong name for a variable was
being set and subsequently uses of the correct name were empty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29681 91177308-0d34-0410-b5e6-96231b3b80d8
Update ltld.[ch] to version 1.5.22.
Correct the notes about updating these tools (autoconf/README.TXT)
Add configure options for getting the correct option for including a whole
archive when linking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29529 91177308-0d34-0410-b5e6-96231b3b80d8
1. Get the path to the pwd binary (/bin/pwd usually) from configure.
2. Use that path to run pwd in all path variables set in Makefile.config.in
The hope is that these changes will resolve symlinks to physical paths. This
should work on all platforms where the binary pwd defaults to printing
physical paths. The shell version of pwd generally doesn't (it will print
the symlink path).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29381 91177308-0d34-0410-b5e6-96231b3b80d8
have a compile-host version of "nm", not build-host. In order to effect this
we must use autoconf to determine the correct "nm" to use and propagate that
through the makefiles, through llvm-config and finally to GenLibDeps.pl as
an optional argument.
Patch contributed by Anton Korobeynikov. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29368 91177308-0d34-0410-b5e6-96231b3b80d8
Provide support for making cross-compiling builds. See the PR for details.
Patch provided by Anton Korobeynikov. Thanks, Anton!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29309 91177308-0d34-0410-b5e6-96231b3b80d8
Add a macro for getting the build host extension for executable. Patch
contributed by Anton Korobeynikov. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29304 91177308-0d34-0410-b5e6-96231b3b80d8
Add configure checks for setjmp/longjmp for Chris. I can't believe this easy
PR has been outstanding for so long. If I don't get to something, please
remind me! :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28686 91177308-0d34-0410-b5e6-96231b3b80d8
are available. These libraries are used in lib/System and should be
included on the link line or if not available generate an error when
building lib/System.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28628 91177308-0d34-0410-b5e6-96231b3b80d8
This assists with getting around configure's late binding values so that
our LLVM variables don't end up with a "NONE" prefix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28325 91177308-0d34-0410-b5e6-96231b3b80d8
and is unlikely to change in future releases. This also simplifies the
parsing of the full and major llvm-gcc version numbers in the script.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28180 91177308-0d34-0410-b5e6-96231b3b80d8
If we fail to find a required program, simply set that program to echo
out something that tells the user the situation. That is, instead of just
"true runtest" we now get "echo 'Skipped: runtest not found'".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27990 91177308-0d34-0410-b5e6-96231b3b80d8
the arguments to the macro. This better supports the AutoRegen.sh script
in projects/sample/autoconf.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27797 91177308-0d34-0410-b5e6-96231b3b80d8
1. Assertions now default to on for all builds
2. If you want them disabled you must (a) --disable-assertions to configure
or DISABLE_ASSERTIONS=1 to make.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27548 91177308-0d34-0410-b5e6-96231b3b80d8
Support detection of a "CVS" directory at configure time to distinguish
whether this is a release build or a "from tree" build. This knowledge is
used to set the defaults for --enable-optimzied and --enable-assertions
options.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27487 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-gcc command. This will help distinguish which version is being used
so the makefiles can accommodate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27461 91177308-0d34-0410-b5e6-96231b3b80d8
1. Check for Perl and only build llvm-config if its available.
2. Add some virtual components
3. Don't depend on "standard" location for Perl, but configured location
4. Document the tool with a POD file.
This version is now ready for testing by users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27005 91177308-0d34-0410-b5e6-96231b3b80d8
is a handy tool for users of LLVM who want to be able to quickly get
information about LLVM's configuration. It is intended to be used in the
command line of other tools. Documentation will be forthcoming in a
subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26952 91177308-0d34-0410-b5e6-96231b3b80d8
go through, but we do want to know if we're using GCC/ICC since they
share certain funky command line options (for dependency generation
stuff)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26198 91177308-0d34-0410-b5e6-96231b3b80d8
* Make it possible to pass a fourth argument to the CHECK_PROGRAM_SANITY
macro that controls whether a non-sane program generates an error or
a warning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24931 91177308-0d34-0410-b5e6-96231b3b80d8
* Add --enable-debug-runtime option, defaults to disabled
* Pass the new config var, DEBUG_RUNTIME, to Makefiles
* Don't use -Wa,-strip-debug if debug-runtime is enabled
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24891 91177308-0d34-0410-b5e6-96231b3b80d8
Make any header files that are automatically generated be preconditions of
the compilation. This ensures that if a *.h.in file is changed then its
corresponding *.h file gets updated on the next rebuild. Note that this can
lead to confusing (but correct) results if the *.h.in file changed
unsubstantially so that autoheader doesn't update the *.h file. In that case,
manually touch the *.h file in question to restore order. Moral of the story,
if you're going to "touch" a *.in file then modify it substantially.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23006 91177308-0d34-0410-b5e6-96231b3b80d8
These patches make threading optional in LLVM. The configuration scripts are now
modified to accept a --disable-threads switch. If this is used, the Mutex class
will be implemented with all functions as no-op. Furthermore, linking against
libpthread will not be done. Finally, the ParallelJIT example needs libpthread
so its makefile was changed to always add -lpthread to the link line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23003 91177308-0d34-0410-b5e6-96231b3b80d8
Previously the script assumed the version number was the last field, now
it assumes it is the first sequence of digits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22527 91177308-0d34-0410-b5e6-96231b3b80d8
for the command line options. This helps with situations where the executable
name sought is too generic and a more meaningful name needs to be used for
the command line options. It also helps satisfy picky project leaders.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22461 91177308-0d34-0410-b5e6-96231b3b80d8
* FIND_STD_PROGRAM will find a program in the path or using --with options
and verify that the path/bin/program is executable. Also allows checking
for include files and libraries. If found, USE_PROGRAM is set, otherwise
its not set. Also sets PROGRAM_BIN (bin directory), and PROGRAM_DIR (top
level directory). If headers are found, sets PROGRAM_INC. If libraries
are found, sets PROGRAM_LIB.
* CHECK_PROGRAM_SANITY can be used to run a program with some option that
only produces information output and requires no input. If the output
matches a regular expression, the program passes the sanity check.
Otherwise, an error occurs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22458 91177308-0d34-0410-b5e6-96231b3b80d8
we actually get the path and not $GRAPHVIZ as the value.
* Add a #define for the gv program (HAVE_GV) and its value LLVM_PATH_GV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22433 91177308-0d34-0410-b5e6-96231b3b80d8
GRAPHVIZ will contain the path to the program if its found (or "echo Graphviz"
if not) and the #define HAVE_GRAPHVIZ will be defined if its found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22424 91177308-0d34-0410-b5e6-96231b3b80d8
This patch completes the changes for making lli thread-safe. Here's the list
of changes:
* The Support/ThreadSupport* files were removed and replaced with the
MutexGuard.h file since all ThreadSupport* declared was a Mutex Guard.
The implementation of MutexGuard.h is now based on sys::Mutex which hides
its implementation and makes it unnecessary to have the -NoSupport.h and
-PThreads.h versions of ThreadSupport.
* All places in ExecutionEngine that previously referred to "Mutex" now
refer to sys::Mutex
* All places in ExecutionEngine that previously referred to "MutexLocker"
now refer to MutexGuard (this is frivolous but I believe the technically
correct name for such a class is "Guard" not a "Locker").
These changes passed all of llvm-test. All we need now are some test cases
that actually use multiple threads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22404 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure that -lpthread gets added to LIBS variable which puts it at the
end of the tools' link commands, if libpthread.a is found.
Add a test for pthread.h so we can use #ifdef HAVE_PTHREAD_H
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22401 91177308-0d34-0410-b5e6-96231b3b80d8
still possible to force V9 (even if configure doesn't think it's one) via
``./configure --target=sparcv9-sun-solaris2.8'' so nothing is lost.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22198 91177308-0d34-0410-b5e6-96231b3b80d8
.exe extension) on Cygwin. This fixes the last few remaining Cygwin
issues. Thanks to Aaron Gray for tracking this down.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22191 91177308-0d34-0410-b5e6-96231b3b80d8
* Check for availability of ffsll call in configure script
* Support ffs, ffsl, and ffsll conversion to constant value if the argument
is constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22027 91177308-0d34-0410-b5e6-96231b3b80d8
script was defaulting the LLVMGCC variable to "llvm-gcc" if it couldn't
find llvm-gcc and --with-llvmgccdir was not specified. In this case, there
is no llvm-gcc available on the system so we shouldn't assume that the
user's path will find it any better than configure could. The fix is to
default it to an empty string. If LLVMGCC is empty, the makefiles will
avoid building things that depend on llvm-gcc and give a nice warning
message to that effect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21953 91177308-0d34-0410-b5e6-96231b3b80d8
--enable-target which can take values "all", "host-only" or a comma
separated list of target names (alpha,ia64,powerpc,skeleton,sparc,x86)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21447 91177308-0d34-0410-b5e6-96231b3b80d8
options have been added to the configure script that control which targets
will be used. The options are:
--enable-target-this (default=disabled)
This will specify that the target corresponding to the build host is
the target that will be compiled/used. You can't use this with any of
the other options (they'll be ignored). This is what most people want.
--disable-target-x86 (default=enabled)
This will prevent the X86 target(s) from being compiled/used.
--disable-target-sparc (default=enabled)
This will prevent both SparcV8 and SparcV9 from being compiled/used.
--disable-target-powerpc (default=enabled)
This will prevent the PowerPC target from being compiled/used.
--disable-target-alpha (default=enabled)
This will prevent the Alpha target from being compiled/used.
--disable-target-ia64 (default=enabled)
This will prevent the IA64 target from being compiled/used.
Note that without any of these options, the default behavior is to build
all targets, as is the current practice.
All these options do is set up the substititution variable TARGETS_TO_BUILD
which contains the targets that should be compiled/used. The variable is
intended to be used in the makefiles. Those changes will come later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@21445 91177308-0d34-0410-b5e6-96231b3b80d8
in the config.status script. This allows the AC_CONFIG_MAKEFILE macro to
work properly after it was changed to support sub-projects.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20305 91177308-0d34-0410-b5e6-96231b3b80d8
is in ${srcdir}/autoconf because that is only true if the project is LLVM.
For other projects (e.g. sample), we don't want to have to distribute the
mkinstalldirs or install-sh programs because it opens a window of breakage
for projects. So, this change requires that the llvm_src variable be set
up via another AC_CONFIG_COMMANDS call. For LLVM this is done in the
configure.ac. For projects its done in the LLVM_CONFIG_PROJECT macro.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20304 91177308-0d34-0410-b5e6-96231b3b80d8
takes care of the --with-llvmsrc and --with-llvmobj options for the project
It was moved here from the project's configure.ac file because there is
some tricky handling of the llvm_src variable to tell the project where the
llvm source tree is (for mkinstalldirs and install-sh commands).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20303 91177308-0d34-0410-b5e6-96231b3b80d8
won't be propagated to the configure script until there's a need to change
configure.ac for some larger purpose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19762 91177308-0d34-0410-b5e6-96231b3b80d8
* Add CAN_DLOPEN_SELF so we can determine if dlopen(0) will open the
program or not.
* Correct a warning messages to be a little more specific on what it checks
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19184 91177308-0d34-0410-b5e6-96231b3b80d8
* Add checks for sterror and strerror_r functions
* Add check to determine if /dev/zero is needed for allocating RWX memory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19148 91177308-0d34-0410-b5e6-96231b3b80d8
* Make sure all headers used by lib/System have checks
* Use "standard" autoconf checks for certain problematic headers
For PR432:
* Resurrect --with-llvmgccdir so a specific llvm-gcc/llvm-g++ installation
can be specified.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19142 91177308-0d34-0410-b5e6-96231b3b80d8
Create new variables LLVM_ON_UNIX and LLVM_ON_WIN32 so we can start getting
rid of reliance upon a symbolic link to switch implementations in lib/System
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19131 91177308-0d34-0410-b5e6-96231b3b80d8
expands to a full path name. Substitute $outputname.exp" instead and it
makes a viable temporary file name. This gets around the problem with lli
on Cygwin linking but not having any "C" library functions linked into it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19123 91177308-0d34-0410-b5e6-96231b3b80d8
* Remove --with-llvmgccdir, not needed any more
* Search path for llvm-gcc and llvm-gxx
* Compute LLVMGCCDIR based on install path of llvm-gcc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@19093 91177308-0d34-0410-b5e6-96231b3b80d8
* Don't search a bunch of .. directories for something we'd never find,
because we don't imbed tclsh into LLVM.
* Look for various tclsh versions because some platforms don't install the
tclsh link but just have tclsh8.3 or tclsh8.4 or some such.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18414 91177308-0d34-0410-b5e6-96231b3b80d8
names that have version numbers in it so this macro, DJ_AC_PATH_TCLSH will
make the necessary checks. The makefile variable TCLSH is set to the path
found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18382 91177308-0d34-0410-b5e6-96231b3b80d8
our own library so that it is magically hidden and we don't have to depend
on linking with -lltdl option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18342 91177308-0d34-0410-b5e6-96231b3b80d8
* organize programs we test for properly
* add new programs needed for documentation generation
* Adjust install paths so llvm stuff doesn't muck up /usr/local or /usr if
$prefix is set to those.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18327 91177308-0d34-0410-b5e6-96231b3b80d8
* cache more values
* standardize cache value names
* organize configure script per autoconf recommendations (10 sections)
* Eliminate some redundancies and complexities in the script
* Provide better documentation in the script.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@18232 91177308-0d34-0410-b5e6-96231b3b80d8
tool runs Deja-gnu test suites. The 'make' variable RUNTEST is now set
automatically in the Makefile.config file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17599 91177308-0d34-0410-b5e6-96231b3b80d8
days of trying to figure it out. Despite some developer's penchant for
relaxing the tool versions, this just isn't possible. Only certain versions
work with certain other versions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16943 91177308-0d34-0410-b5e6-96231b3b80d8
version of the configure script. This is an early commit of the automake
support so that automake support can be tested on multiple platforms. Many
additional Makefile.am need to be added to LLVM before this is of any use.
Please wait until automake support is announced on llvmdev list before
using the --with-automake option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16837 91177308-0d34-0410-b5e6-96231b3b80d8
from the fray, so it gets noticed. This commit is made without the
corresponding configure script commit because it doesn't affect
functionality and we don't want to force everyone into another reconfigure
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16657 91177308-0d34-0410-b5e6-96231b3b80d8
from being re-generated if the new version is identical to the old version.
Hence, it should save us some recompiling after re-configures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16506 91177308-0d34-0410-b5e6-96231b3b80d8
Instead just create a warning message that says the directory cannot be
configured because it isn't recognized. This also gets rid of a bunch of
warning messages from the auto* tools.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16463 91177308-0d34-0410-b5e6-96231b3b80d8
function, not the whole main function. This problem resulted during
conversion of scripts to the new autoconf standard. The effect was that
the mmap_file test would fail and if it does there is currently an
#ifdef'd #error that causes compilation to fail. Bad, bad, bad.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16462 91177308-0d34-0410-b5e6-96231b3b80d8
necessary to ensure that a consistent configuration is created on each
platform. Certain definitions we use (like m4/libtool.m4) require certain
versions of the tools and we can no longer be slack about this or we'll
have problems with mis-configured builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16412 91177308-0d34-0410-b5e6-96231b3b80d8
This is a potential version mismatch problem because this file came from
libtool 1.5.10. If you're running a different version of libtool, the
checks in this file may not be quite right. Having our own version of this
file violates the spirit of libtool and is only provided to change the name
of "libtool" to "mklib". This is done so that the name "libtool" does not
conflict with the "lib" directory when doing tab completion and your
$objdir == $srcdir.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16411 91177308-0d34-0410-b5e6-96231b3b80d8
