The LangRef warning wasn't formatting the way I intended it to anyway.
Surprisingly inalloca appears to work, even when optimizations are
enabled. We generate very bad code for it, but we can self-host and run
lots of big tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204888 91177308-0d34-0410-b5e6-96231b3b80d8
and v4i64->v4f64.
The new costs match what we did for SSE2 and reflect the reality of our codegen.
<rdar://problem/16381225>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204884 91177308-0d34-0410-b5e6-96231b3b80d8
It seems that gcov, when faced with a string that is apparently zero
length, just keeps reading words until it finds a length it likes
better. I'm not really sure why this is, but it's simple enough to
make llvm-cov follow suit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204881 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-cov tests are sensitive to line number changes, so putting this
at the end will limit churn when we fix the XFAIL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204871 91177308-0d34-0410-b5e6-96231b3b80d8
Functions may in an instrumented binary but not in the original source
when they're inserted by the compiler or the runtime. These functions
aren't meaningful to the user, so teach llvm-cov to skip over them
instead of crashing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204863 91177308-0d34-0410-b5e6-96231b3b80d8
vector list parameter that is using all lanes "{d0[], d2[]}" but can
match and instruction with a ”{d0, d2}" parameter.
I’m finishing up a fix for proper checking of the unsupported
alignments on vld/vst instructions and ran into this. Thus I don’t
have a test case at this time. And adding all code that will
demonstrate the bug would obscure the very simple one line fix.
So if you would indulge me on not having a test case at this
time I’ll instead offer up a detailed explanation of what is
going on in this commit message.
This instruction:
vld2.8 {d0[], d2[]}, [r4:64]
is not legal as the alignment can only be 16 when the size is 8.
Per this documentation:
A8.8.325 VLD2 (single 2-element structure to all lanes)
<align> The alignment. It can be one of:
16 2-byte alignment, available only if <size> is 8, encoded as a = 1.
32 4-byte alignment, available only if <size> is 16, encoded as a = 1.
64 8-byte alignment, available only if <size> is 32, encoded as a = 1.
omitted Standard alignment, see Unaligned data access on page A3-108.
So when code is added to the llvm integrated assembler to not match
that instruction because of the alignment it then goes on to try to match
other instructions and comes across this:
vld2.8 {d0, d2}, [r4:64]
and and matches it. This is because of the method
ARMOperand::isVecListDPairSpaced() is missing the check of the Kind.
In this case the Kind is k_VectorListAllLanes . While the name of the method
may suggest that this is OK it really should check that the Kind is
k_VectorList.
As the method ARMOperand::isDoubleSpacedVectorAllLanes() is what was
used to match {d0[], d2[]} and correctly checks the Kind:
bool isDoubleSpacedVectorAllLanes() const {
return Kind == k_VectorListAllLanes && VectorList.isDoubleSpaced;
}
where the original ARMOperand::isVecListDPairSpaced() does not check
the Kind:
bool isVecListDPairSpaced() const {
if (isSingleSpacedVectorList()) return false;
return (ARMMCRegisterClasses[ARM::DPairSpcRegClassID]
.contains(VectorList.RegNum));
}
Jim Grosbach has reviewed the change and said: Yep, that sounds right. …
And by "right" I mean, "wow, that's a nasty latent bug I'm really, really
glad to see fixed." :)
rdar://16436683
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204861 91177308-0d34-0410-b5e6-96231b3b80d8
This commit consist of two parts.
The first part fix the PR15967. The wrong conclusion was made when the MaxLookup
limit was reached. The fix introduce a out parameter (MaxLookupReached) to
DecomposeGEPExpression that the function aliasGEP can act upon.
The second part is introducing the constant MaxLookupSearchDepth to make sure
that DecomposeGEPExpression and GetUnderlyingObject use the same search depth.
This is a small cleanup to clarify the original algorithm.
Patch by Karl-Johan Karlsson!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204859 91177308-0d34-0410-b5e6-96231b3b80d8
In CallInst, op_end() points at the callee, which we don't want to iterate over
when just iterating over arguments. Now take this into account when returning
a iterator_range from arg_operands. Similar reasoning for InvokeInst.
Also adds a unit test to verify this actually works as expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204851 91177308-0d34-0410-b5e6-96231b3b80d8
I've not yet updated PPCTTI because I'm not sure what the actual relative cost
is compared to the aligned uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204848 91177308-0d34-0410-b5e6-96231b3b80d8
The edge data structure (EdgeEntry) now holds the indices of its entries in the
adjacency lists of the nodes it connects. This trades a little ugliness for
faster insertion/removal, which is now O(1) with a cheap constant factor. All
of this is implementation detail within the PBQP graph, the external API remains
unchanged.
Individual register allocations are likely to change, since the adjacency lists
will now be ordered differently (or rather, will now be unordered). This
shouldn't affect the average quality of allocations however.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204841 91177308-0d34-0410-b5e6-96231b3b80d8
These patterns are dead (because v4f32 stores are currently promoted to v4i32
and stored using Altivec instructions), and also are likely not correct
(because they'd store the vector elements in the opposite order from that
assumed by the rest of the Altivec code).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204839 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions have access to the complete VSX register file. In addition,
they "swap" the order of the elements so that element 0 (the scalar part) comes
first in memory and element 1 follows at a higher address.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204838 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is in similar vein to what done earlier to Module::globals/aliases
etc. It allows to iterate over function arguments like this:
for (Argument Arg : F.args()) {
...
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204835 91177308-0d34-0410-b5e6-96231b3b80d8
In some cases it is possible for CGP to attempt to reuse a base address from
another basic block. In those cases we have to be sure that all the address
math was either done at the same bit width, or that none of it overflowed
before it was extended.
Patch by Louis Gerbarg <lgg@apple.com>
rdar://16307442
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204833 91177308-0d34-0410-b5e6-96231b3b80d8
> For functions where esi is used as base pointer, we would previously fall ba
> from lowering memcpy with "rep movs" because that clobbers esi.
>
> With this patch, we just store esi in another physical register, and restore
> it afterwards. This adds a little bit of register preassure, but the more
> efficient memcpy should be worth it.
>
> Differential Revision: http://llvm-reviews.chandlerc.com/D2968
This didn't work. I was ending up with code like this:
lea edi,[esi+38h]
mov ecx,0Fh
mov edx,esi
mov esi,ebx
rep movs dword ptr es:[edi],dword ptr [esi]
lea ecx,[esi+74h] <-- Ooops, we're now using esi before restoring it from edx.
add ebx,3Ch
mov esi,edx
I guess if we want to do this we need stronger glue or something, or doing the expansion
much later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204829 91177308-0d34-0410-b5e6-96231b3b80d8
v2i64 needs to be a legal VSX type because it is the SetCC result type from
v2f64 comparisons. We need to expand all non-arithmetic v2i64 operations.
This fixes the lowering for v2f64 VSELECT.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204828 91177308-0d34-0410-b5e6-96231b3b80d8
This enables TableGen to generate an additional two operand matcher
for our ArithLogicR class of instructions (constituted by 3 register operands).
E.g.: and $1, $2 <=> and $1, $1, $2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204826 91177308-0d34-0410-b5e6-96231b3b80d8
The '.dword' directive accepts a list of expressions and emits
them in 8-byte chunks in successive locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204822 91177308-0d34-0410-b5e6-96231b3b80d8
parseDirectiveWord is a generic function that parses an expression which
means there's no need for it to have such an specific name. Renaming it to
parseDataDirective so that it can also be used to handle .dword directives[1].
[1]To be added in a follow up commit.
No functional changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204818 91177308-0d34-0410-b5e6-96231b3b80d8
The '.set mips64' directive enables the feature Mips:FeatureMips64
from assembly. Note that it doesn't modify the ELF header as opposed
to the use of -mips64 from the command-line. The reason for this
is that we want to be as compatible as possible with existing assemblers
like GAS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204817 91177308-0d34-0410-b5e6-96231b3b80d8
The '.set mips64r2' directive enables the feature Mips:FeatureMips64r2
from assembly. Note that it doesn't modify the ELF header as opposed
to the use of -mips64r2 from the command-line. The reason for this
is that we want to be as compatible as possible with existing assemblers
like GAS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204815 91177308-0d34-0410-b5e6-96231b3b80d8
We've already got versions without the barriers, so this just adds IR-level
support for generating the new v8 ones.
rdar://problem/16227836
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204813 91177308-0d34-0410-b5e6-96231b3b80d8
Given that we support multiple directives that enable a particular feature
(e.g. '.set mips16'), it's best to hoist that code into a new function
so that we don't repeat the same pattern w.r.t parsing and handling error cases.
No functional changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204811 91177308-0d34-0410-b5e6-96231b3b80d8
After some discussion on IRC, emitting a call to the library function seems
like a better default, since it will move from a compiler internal error to
a linker error, that the user can work around until LLVM is fixed.
I'm also adding a note on the responsibility of the user to confirm that
the cache was cleared on platforms where nothing is done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204806 91177308-0d34-0410-b5e6-96231b3b80d8
