using GEPs. Previously, it used a number of different heuristics for
analyzing the GEPs. Several of these were conservatively correct, but
failed to fall back to SCEV even when SCEV might have given a reasonable
answer. One was simply incorrect in how it was formulated.
There was good code already to recursively evaluate the constant offsets
in GEPs, look through pointer casts, etc. I gathered this into a form
code like the SLP code can use in a previous commit, which allows all of
this code to become quite simple.
There is some performance (compile time) concern here at first glance as
we're directly attempting to walk both pointers constant GEP chains.
However, a couple of thoughts:
1) The very common cases where there is a dynamic pointer, and a second
pointer at a constant offset (usually a stride) from it, this code
will actually not do any unnecessary work.
2) InstCombine and other passes work very hard to collapse constant
GEPs, so it will be rare that we iterate here for a long time.
That said, if there remain performance problems here, there are some
obvious things that can improve the situation immensely. Doing
a vectorizer-pass-wide memoizer for each individual layer of pointer
values, their base values, and the constant offset is likely to be able
to completely remove redundant work and strictly limit the scaling of
the work to scrape these GEPs. Since this optimization was not done on
the prior version (which would still benefit from it), I've not done it
here. But if folks have benchmarks that slow down it should be straight
forward for them to add.
I've added a test case, but I'm not really confident of the amount of
testing done for different access patterns, strides, and pointer
manipulation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189007 91177308-0d34-0410-b5e6-96231b3b80d8
Update iterator when the SLP vectorizer changes the instructions in the basic
block by restarting the traversal of the basic block.
Patch by Yi Jiang!
Fixes PR 16899.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188832 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a llvm.copysign intrinsic; We already have Libfunc recognition for
copysign (which is turned into the FCOPYSIGN SDAG node). In order to
autovectorize calls to copysign in the loop vectorizer, we need a corresponding
intrinsic as well.
In addition to the expected changes to the language reference, the loop
vectorizer, BasicTTI, and the SDAG builder (the intrinsic is transformed into
an FCOPYSIGN node, just like the function call), this also adds FCOPYSIGN to a
few lists in LegalizeVector{Ops,Types} so that vector copysigns can be
expanded.
In TargetLoweringBase::initActions, I've made the default action for FCOPYSIGN
be Expand for vector types. This seems correct for all in-tree targets, and I
think is the right thing to do because, previously, there was no way to generate
vector-values FCOPYSIGN nodes (and most targets don't specify an action for
vector-typed FCOPYSIGN).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188728 91177308-0d34-0410-b5e6-96231b3b80d8
When computing the use set of a store, we need to add the store to the write
set prior to iterating over later instructions. Otherwise, if there is a later
aliasing load of that store, that load will not be tagged as a use, and bad
things will happen.
trackUsesOfI still adds later dependent stores of an instruction to that
instruction's write set, but it never sees the original instruction, and so
when tracking uses of a store, the store must be added to the write set by the
caller.
Fixes PR16834.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188329 91177308-0d34-0410-b5e6-96231b3b80d8
Do not generate new vector values for the same entries because we know that the incoming values
from the same block must be identical.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188185 91177308-0d34-0410-b5e6-96231b3b80d8
All libm floating-point rounding functions, except for round(), had their own
ISD nodes. Recent PowerPC cores have an instruction for round(), and so here I'm
adding ISD::FROUND so that round() can be custom lowered as well.
For the most part, this is straightforward. I've added an intrinsic
and a matching ISD node just like those for nearbyint() and friends. The
SelectionDAG pattern I've named frnd (because ISD::FP_ROUND has already claimed
fround).
This will be used by the PowerPC backend in a follow-up commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187926 91177308-0d34-0410-b5e6-96231b3b80d8
We don't have tests for the effect of if-conversion loops because it requires a big test (that includes if-converted loops) and it is difficult to find and balance a loop to do the right thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186845 91177308-0d34-0410-b5e6-96231b3b80d8
This check does not always work because not all of the GEPs use a constant offset, but it happens often enough to reduce the number of times we use SCEV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186465 91177308-0d34-0410-b5e6-96231b3b80d8
If an outside loop user of the reduction value uses the header phi node we
cannot just reduce the vectorized phi value in the vector code epilog because
we would loose VF-1 reductions.
lp:
p = phi (0, lv)
lv = lv + 1
...
brcond , lp, outside
outside:
usr = add 0, p
(Say the loop iterates two times, the value of p coming out of the loop is one).
We cannot just transform this to:
vlp:
p = phi (<0,0>, lv)
lv = lv + <1,1>
..
brcond , lp, outside
outside:
p_reduced = p[0] + [1];
usr = add 0, p_reduced
(Because the original loop iterated two times the vectorized loop would iterate
one time, but p_reduced ends up being zero instead of one).
We would have to execute VF-1 iterations in the scalar remainder loop in such
cases. For now, just disable vectorization.
PR16522
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186256 91177308-0d34-0410-b5e6-96231b3b80d8
In general, one should always complete CFG modifications first, update
CFG-based analyses, like Dominatores and LoopInfo, then generate
instruction sequences.
LoopVectorizer was creating a new loop, calling SCEVExpander to
generate checks, then updating LoopInfo. I just changed the order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186241 91177308-0d34-0410-b5e6-96231b3b80d8
Address calculation for gather/scather in vectorized code can incur a
significant cost making vectorization unbeneficial. Add infrastructure to add
cost.
Tests and cost model for targets will be in follow-up commits.
radar://14351991
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186187 91177308-0d34-0410-b5e6-96231b3b80d8
Before we could vectorize PHINodes scanning successors was a good way of finding candidates. Now we can vectorize the phinodes which is simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186139 91177308-0d34-0410-b5e6-96231b3b80d8
We can vectorize them because in the case where we wrap in the address space the
unvectorized code would have had to access a pointer value of zero which is
undefined behavior in address space zero according to the LLVM IR semantics.
(Thank you Duncan, for pointing this out to me).
Fixes PR16592.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186088 91177308-0d34-0410-b5e6-96231b3b80d8
Commit 185883 fixes a bug in the IRBuilder that should fix the ASan bot. AssertingVH can help in exposing some RAUW problems.
Thanks Ben and Alexey!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185886 91177308-0d34-0410-b5e6-96231b3b80d8
