Many targets always use the same bitwise encoding value for physical
registers in all (or most) instructions. Add this mapping to the
.td files and TableGen'erate the information and expose an accessor
in MCRegisterInfo.
patch by Tom Stellard.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156829 91177308-0d34-0410-b5e6-96231b3b80d8
Add the MCRegisterInfo to the factories and constructors.
Patch by Tom Stellard <Tom.Stellard@amd.com>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156828 91177308-0d34-0410-b5e6-96231b3b80d8
so that it can be reused in MemCpyOptimizer. This analysis is needed to remove
an unnecessary memcpy when returning a struct into a local variable.
rdar://11341081
PR12686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156776 91177308-0d34-0410-b5e6-96231b3b80d8
Returning a temporary BitVector is very expensive. If you must, create
the temporary explicitly: Use BitVector(A).flip() instead of ~A.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156768 91177308-0d34-0410-b5e6-96231b3b80d8
These operators were crazy slow, calling malloc to return a temporary
result. At the same time, they look very innocent when used in code.
If you need temporary BitVectors to compute your thing, create them
explicitly, and use the inplace logical operators. This makes the high
cost explicit in the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156767 91177308-0d34-0410-b5e6-96231b3b80d8
Ordinary patch for PR1255.
Added new case-ranges orientated methods for adding/removing cases in SwitchInst. After this patch cases will internally representated as ConstantArray-s instead of ConstantInt, externally cases wrapped within the ConstantRangesSet object.
Old methods of SwitchInst are also works well, but marked as deprecated. So on this stage we have no side effects except that I added support for case ranges in BitcodeReader/Writer, of course test for Bitcode is also added. Old "switch" format is also supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156704 91177308-0d34-0410-b5e6-96231b3b80d8
This new function provides a way to get the iOS version number from ios triples.
Part of rdar://11409204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156483 91177308-0d34-0410-b5e6-96231b3b80d8
This lets you save the textual representation of the LLVM IR to a file.
Before this patch it could only be printed to STDERR from llvm-c.
Patch by Carlo Kok!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156479 91177308-0d34-0410-b5e6-96231b3b80d8
Added new case-ranges orientated methods for adding/removing cases in SwitchInst. After this patch cases will internally representated as ConstantArray-s instead of ConstantInt, externally cases wrapped within the ConstantRangesSet object.
Old methods of SwitchInst are also works well, but marked as deprecated. So on this stage we have no side effects except that I added support for case ranges in BitcodeReader/Writer, of course test for Bitcode is also added. Old "switch" format is also supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156374 91177308-0d34-0410-b5e6-96231b3b80d8
The getPointerRegClass() hook can return register classes that depend on
the calling convention of the current function (ptr_rc_tailcall).
So far, we have been able to infer the calling convention from the
subtarget alone, but as we add support for multiple calling conventions
per target, that no longer works.
Patch by Yiannis Tsiouris!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156328 91177308-0d34-0410-b5e6-96231b3b80d8
This function is a generalization of getMatchingSuperRegClass() to the
symmetric case where both sides are using a sub-register index. It will
find a super-register class and sub-register indexes that make this
diagram commute:
PreA
SuperRC ----------> RCA
| |
| |
PreB | | SubA
| |
| |
V V
RCB ----------> SubRC
SubB
This can be used to coalesce copies like:
%vreg1:sub16 = COPY %vreg2:sub16; GR64:%vreg1, GR32: %vreg2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156317 91177308-0d34-0410-b5e6-96231b3b80d8
This will be used to determine whether it's profitable to turn a select into a
branch when the branch is likely to be predicted.
Currently enabled for everything but Atom on X86 and Cortex-A9 devices on ARM.
I'm not entirely happy with the name of this flag, suggestions welcome ;)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156233 91177308-0d34-0410-b5e6-96231b3b80d8
add a new Region::block_iterator which actually iterates over the basic
blocks of the region.
The old iterator, now call 'block_node_iterator' iterates over
RegionNodes which contain a single basic block. This works well with the
GraphTraits-based iterator design, however most users actually want an
iterator over the BasicBlocks inside these RegionNodes. Now the
'block_iterator' is a wrapper which exposes exactly this interface.
Internally it uses the block_node_iterator to walk all nodes which are
single basic blocks, but transparently unwraps the basic block to make
user code simpler.
While this patch is a bit of a wash, most of the updates are to internal
users, not external users of the RegionInfo. I have an accompanying
patch to Polly that is a strict simplification of every user of this
interface, and I'm working on a pass that also wants the same simplified
interface.
This patch alone should have no functional impact.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156202 91177308-0d34-0410-b5e6-96231b3b80d8
The new target machines are:
nvptx (old ptx32) => 32-bit PTX
nvptx64 (old ptx64) => 64-bit PTX
The sources are based on the internal NVIDIA NVPTX back-end, and
contain more functionality than the current PTX back-end currently
provides.
NV_CONTRIB
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156196 91177308-0d34-0410-b5e6-96231b3b80d8
of the CodeExtractor utility. This allows speculatively computing input
and output sets to measure the likely size impact of the code
extraction.
These sets cannot be reused sadly -- we mutate the function prior to
forming the final sets used by the actual extraction.
The interface has been revamped slightly to make it easier to use
correctly by making the interface const and sinking the computation of
the number of exit blocks into the full extraction function and away
from the rest of this logic which just computed two output parameters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156168 91177308-0d34-0410-b5e6-96231b3b80d8
and expose it as a utility class rather than as free function wrappers.
The simple free-function interface works well for the bugpoint-specific
pass's uses of code extraction, but in an upcoming patch for more
advanced code extraction, they simply don't expose a rich enough
interface. I need to expose various stages of the process of doing the
code extraction and query information to decide whether or not to
actually complete the extraction or give up.
Rather than build up a new predicate model and pass that into these
functions, just take the class that was actually implementing the
functions and lift it up into a proper interface that can be used to
perform code extraction. The interface is cleaned up and re-documented
to work better in a header. It also is now setup to accept the blocks to
be extracted in the constructor rather than in a method.
In passing this essentially reverts my previous commit here exposing
a block-level query for eligibility of extraction. That is no longer
necessary with the more rich interface as clients can query the
extraction object for eligibility directly. This will reduce the number
of walks of the input basic block sequence by quite a bit which is
useful if this enters the normal optimization pipeline.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156163 91177308-0d34-0410-b5e6-96231b3b80d8
This manually enumerated list of super-register classes has been
superceeded by the automatically computed super-register class masks
available through SuperRegClassIterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156151 91177308-0d34-0410-b5e6-96231b3b80d8
The masks returned by SuperRegClassIterator are computed automatically
by TableGen. This is better than depending on the manually specified
SuperRegClasses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156147 91177308-0d34-0410-b5e6-96231b3b80d8
This iterator class provides a more abstract interface to the (Idx,
Mask) lists of super-registers for a register class. The layout of the
tables shouldn't be exposed to clients.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156144 91177308-0d34-0410-b5e6-96231b3b80d8
minor behavior changes with this, but nothing I have seen evidence of in
the wild or expect to be meaningful. The real goal is unifying our logic
and simplifying the interfaces. A summary of the changes follows:
- Make 'callIsSmall' actually accept a callsite so it can handle
intrinsics, and simplify callers appropriately.
- Nuke a completely bogus declaration of 'callIsSmall' that was still
lurking in InlineCost.h... No idea how this got missed.
- Teach the 'isInstructionFree' about the various more intelligent
'free' heuristics that got added to the inline cost analysis during
review and testing. This mostly surrounds int->ptr and ptr->int casts.
- Switch most of the interesting parts of the inline cost analysis that
were essentially computing 'is this instruction free?' to use the code
metrics routine instead. This way we won't keep duplicating logic.
All of this is motivated by the desire to allow other passes to compute
a roughly equivalent 'cost' metric for a particular basic block as the
inline cost analysis. Sadly, re-using the same analysis for both is
really messy because only the actual inline cost analysis is ever going
to go to the contortions required for simplification, SROA analysis,
etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156140 91177308-0d34-0410-b5e6-96231b3b80d8
but using a FoldingSet underneath and with a largely compatible
interface to that of FoldingSet. This can be used anywhere a FoldingSet
would be natural, but iteration order is significant. The initial
intended use case is in Clang's template specialization lists to
preserve instantiation order iteration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156131 91177308-0d34-0410-b5e6-96231b3b80d8
This is a pointer into one of the tables used by
getMatchingSuperRegClass(). It makes it possible to use a shared
implementation of that function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156121 91177308-0d34-0410-b5e6-96231b3b80d8
extraction into a public interface. Also clean it up and apply it more
consistently such that we check for landing pads *anywhere* in the
extracted code, not just in single-block extraction.
This will be used to guide decisions in passes that are planning to
eventually perform a round of code extraction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156114 91177308-0d34-0410-b5e6-96231b3b80d8
Some targets have no sub-registers at all. Use the TargetRegisterInfo
versions of composeSubRegIndices(), getSubClassWithSubReg(), and
getMatchingSuperRegClass() for those targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156075 91177308-0d34-0410-b5e6-96231b3b80d8
The ensures that virtual registers always belong to an allocatable class.
If your target attempts to create a vreg for an operand that has no
allocatable register subclass, you will crash quickly.
This ensures that targets define register classes as intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156046 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids warnings when included in a application that
uses -Wstrict-prototypes.
e.g: AsmPrinters.def:27:1: warning: function declaration isn't a prototype [-Wstrict-prototypes]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155997 91177308-0d34-0410-b5e6-96231b3b80d8
Note that support for rvalue references does not imply support
for the full set of move-related STL operations.
I've preserved support for an odd little thing in insert() where
we're trying to support inserting a new element from an existing
one. If we actually want to support that, there's a lot more we
need to do: insert can call either grow or push_back, neither of
which is safe against this particular use pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155979 91177308-0d34-0410-b5e6-96231b3b80d8
The TargetPassManager's default constructor wants to initialize the PassManager
to 'null'. But it's illegal to bind a null reference to a null l-value. Make the
ivar a pointer instead.
PR12468
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155902 91177308-0d34-0410-b5e6-96231b3b80d8
Allow the "SplitCriticalEdge" function to split the edge to a landing pad. If
the pass is *sure* that it thinks it knows what it's doing, then it may go ahead
and specify that the landing pad can have its critical edge split. The loop
unswitch pass is one of these passes. It will split the critical edges of all
edges coming from a loop to a landing pad not within the loop. Doing so will
retain important loop analysis information, such as loop simplify.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155817 91177308-0d34-0410-b5e6-96231b3b80d8
This way we can enable the POD-like class optimization for a lot more classes,
saving ~120k of code in clang/i386/Release+Asserts when selfhosting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155761 91177308-0d34-0410-b5e6-96231b3b80d8
- FlatArrayMap. Very simple map container that uses flat array inside.
- MultiImplMap. Map container interface, that has two modes, one for small amount of elements and one for big amount.
- SmallMap. SmallMap is DenseMap compatible MultiImplMap. It uses FlatArrayMap for small mode, and DenseMap for big mode.
Also added unittests for new classes and update for ProgrammersManual.
For more details about new classes see ProgrammersManual and comments in sourcecode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155557 91177308-0d34-0410-b5e6-96231b3b80d8
When an instruction match is found, but the subtarget features it
requires are not available (missing floating point unit, or thumb vs arm
mode, for example), issue a diagnostic that identifies what the feature
mismatch is.
rdar://11257547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155499 91177308-0d34-0410-b5e6-96231b3b80d8
Strategy.
0. Implement new classes. Classes doesn't affect anything. They still work with ConstantInt base values at this stage.
1. Fictitious replacement of current ConstantInt case values with ConstantRangesSet. Case ranges set will still hold single value, and ConstantInt *getCaseValue() will return it. But additionally implement new method in SwitchInst that allows to work with case ranges. Currenly I think it should be some wrapper that returns either single value or ConstantRangesSet object.
2. Step-by-step replacement of old "ConstantInt* getCaseValue()" with new alternative. Modify algorithms for all passes that works with SwitchInst. But don't modify LLParser and BitcodeReader/Writer. Still hold single value in each ConstantRangesSet object. On this stage some parts of LLVM will use old-style methods, and some ones new-style.
3. After all getCaseValue() usages will removed and whole LLVM and its clients will work in new style - modify LLParser, Reader and Writer. Remove getCaseValue().
4. Replace ConstantInt*-based case ranges set items with APInt ones.
Currently we are on Zero Stage: New classes.
ConstantRangesSet.
I selected ConstantArrays as case ranges set "holder" object (it is a temporary decision, I'll explain why below). The array items are may be ConstantVectors with single item, and ConstantVectors with two items (that means single number and range respectively).
The ConstantInt will used as basic value representation. It will replaced with APInt then. Of course ConstantArray and ConstantVector will go away after ConstantInt => APInt replacement.
New class mandatory features:
- bool isSatisfies(ConstantInt *V) method (need better name?). Returns true if the given value satisfies this case.
- Case's ranges and values enumeration. In some passes we need to analize each case (SwitchLowering for example).
Factory + unified clusterify.
I also propose to implement the factory that allows to build case object with user friendly way. I called it CRSBuilder by now.
Currenly I implemented the factory that allows add,remove pairs of range+successor. It also allows add existing ConstantRangesSet decompiling it to separated ranges. Factory can emit either clusters set (single case range + successor) or the set of "ConstantRangesSet + Successor" pairs.
So you can use it either as builder for new cases set for SwitchInst, or for clusterification of existing cases set.
Just call Factory.optimize() and it emits optimized and sorted clusters collection for you!
I tested clusterification on SelectionDAGBuilder - it works fine. Don't worry it was not included in this patch. Just new classes.
Factory is a template. There are two params: SuccessorClass and IsReadonly. So you can specify what successor you need (BB or MBB). And you can also restrict your factory to use values in read-only mode (SelectionDAGBuilder need IsReadonly=true). Read-only factory couldn't build the cases ranges.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155464 91177308-0d34-0410-b5e6-96231b3b80d8
The DAG builder is a convenient place to do it. Hopefully this is more
efficient than a separate traversal over the same region.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155456 91177308-0d34-0410-b5e6-96231b3b80d8
on X86 Atom. Some of our tests failed because the tail merging part of
the BranchFolding pass was creating new basic blocks which did not
contain live-in information. When the anti-dependency code in the Post-RA
scheduler ran, it would sometimes rename the register containing
the function return value because the fact that the return value was
live-in to the subsequent block had been lost. To fix this, it is necessary
to run the RegisterScavenging code in the BranchFolding pass.
This patch makes sure that the register scavenging code is invoked
in the X86 subtarget only when post-RA scheduling is being done.
Post RA scheduling in the X86 subtarget is only done for Atom.
This patch adds a new function to the TargetRegisterClass to control
whether or not live-ins should be preserved during branch folding.
This is necessary in order for the anti-dependency optimizations done
during the PostRASchedulerList pass to work properly when doing
Post-RA scheduling for the X86 in general and for the Intel Atom in particular.
The patch adds and invokes the new function trackLivenessAfterRegAlloc()
instead of using the existing requiresRegisterScavenging().
It changes BranchFolding.cpp to call trackLivenessAfterRegAlloc() instead of
requiresRegisterScavenging(). It changes the all the targets that
implemented requiresRegisterScavenging() to also implement
trackLivenessAfterRegAlloc().
It adds an assertion in the Post RA scheduler to make sure that post RA
liveness information is available when it is needed.
It changes the X86 break-anti-dependencies test to use –mcpu=atom, in order
to avoid running into the added assertion.
Finally, this patch restores the use of anti-dependency checking
(which was turned off temporarily for the 3.1 release) for
Intel Atom in the Post RA scheduler.
Patch by Andy Zhang!
Thanks to Jakob and Anton for their reviews.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155395 91177308-0d34-0410-b5e6-96231b3b80d8
test suite failures. The failures occur at each stage, and only get
worse, so I'm reverting all of them.
Please resubmit these patches, one at a time, after verifying that the
regression test suite passes. Never submit a patch without running the
regression test suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155372 91177308-0d34-0410-b5e6-96231b3b80d8
The problem is that the struct file_status on UNIX systems has two
members called st_dev and st_ino; those are also members of the
struct stat, and they are reserved identifiers which can also be
provided as #define (and this is the case for st_dev on Hurd).
The solution (attached) is to rename them, for example adding a
"fs_" prefix (= file status) to them.
Patch by Pino Toscano
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155354 91177308-0d34-0410-b5e6-96231b3b80d8
It set NumLowBitAvailable = 3 which may not be true on all platforms. We only
ever use 2 bits (the default) so this assumption can be safely removed
Should fix PR12612.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155288 91177308-0d34-0410-b5e6-96231b3b80d8
Now that multiple DAGUpdateListeners can be active at the same time,
ISelPosition can become a local variable in DoInstructionSelection.
We simply register an ISelUpdater with CurDAG while ISelPosition exists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155249 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of passing listener pointers to RAUW, let SelectionDAG itself
keep a linked list of interested listeners.
This makes it possible to have multiple listeners active at once, like
RAUWUpdateListener was already doing. It also makes it possible to
register listeners up the call stack without controlling all RAUW calls
below.
DAGUpdateListener uses an RAII pattern to add itself to the SelectionDAG
list of active listeners.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155248 91177308-0d34-0410-b5e6-96231b3b80d8
This nicely handles the most common case of virtual register sets, but
also handles anticipated cases where we will map pointers to IDs.
The goal is not to develop a completely generic SparseSet
template. Instead we want to handle the expected uses within llvm
without any template antics in the client code. I'm adding a bit of
template nastiness here, and some assumption about expected usage in
order to make the client code very clean.
The expected common uses cases I'm designing for:
- integer keys that need to be reindexed, and may map to additional
data
- densely numbered objects where we want pointer keys because no
number->object map exists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155227 91177308-0d34-0410-b5e6-96231b3b80d8
Assembly matchers for instructions with a two-operand form. ARM is full
of these, for example:
add {Rd}, Rn, Rm // Rd is optional and is the same as Rn if omitted.
The property TwoOperandAliasConstraint on the instruction definition controls
when, and if, an alias will be formed. No explicit InstAlias definitions
are required.
rdar://11255754
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155172 91177308-0d34-0410-b5e6-96231b3b80d8
commits have had several major issues pointed out in review, and those
issues are not being addressed in a timely fashion. Furthermore, this
was all committed leading up to the v3.1 branch, and we don't need piles
of code with outstanding issues in the branch.
It is possible that not all of these commits were necessary to revert to
get us back to a green state, but I'm going to let the Hexagon
maintainer sort that out. They can recommit, in order, after addressing
the feedback.
Reverted commits, with some notes:
Primary commit r154616: HexagonPacketizer
- There are lots of review comments here. This is the primary reason
for reverting. In particular, it introduced large amount of warnings
due to a bad construct in tablegen.
- Follow-up commits that should be folded back into this when
reposting:
- r154622: CMake fixes
- r154660: Fix numerous build warnings in release builds.
- Please don't resubmit this until the three commits above are
included, and the issues in review addressed.
Primary commit r154695: Pass to replace transfer/copy ...
- Reverted to minimize merge conflicts. I'm not aware of specific
issues with this patch.
Primary commit r154703: New Value Jump.
- Primarily reverted due to merge conflicts.
- Follow-up commits that should be folded back into this when
reposting:
- r154703: Remove iostream usage
- r154758: Fix CMake builds
- r154759: Fix build warnings in release builds
- Please incorporate these fixes and and review feedback before
resubmitting.
Primary commit r154829: Hexagon V5 (floating point) support.
- Primarily reverted due to merge conflicts.
- Follow-up commits that should be folded back into this when
reposting:
- r154841: Remove unused variable (fixing build warnings)
There are also accompanying Clang commits that will be reverted for
consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155047 91177308-0d34-0410-b5e6-96231b3b80d8
DenseMap's hash function uses slightly more entropy and reduces hash collisions
significantly. I also experimented with Hashing.h, but it didn't gave a lot of
improvement while being much more expensive to compute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154996 91177308-0d34-0410-b5e6-96231b3b80d8
also fix SimplifyLibCalls to use TLI rather than compile-time conditionals to enable optimizations on floor, ceil, round, rint, and nearbyint
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154960 91177308-0d34-0410-b5e6-96231b3b80d8
for the life of me remember why I wrote it this way, but I can't see any good
reason for it now. This patch replaces the custom linked list with an ilist.
This change should preserve the existing numberings exactly, so no generated code
should change (if it does, file a bug!).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154904 91177308-0d34-0410-b5e6-96231b3b80d8
the MCJIT execution engine.
The GDB JIT debugging integration support works by registering a loaded
object image with a pre-defined function that GDB will monitor if GDB
is attached. GDB integration support is implemented for ELF only at this
time. This integration requires GDB version 7.0 or newer.
Patch by Andy Kaylor!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154868 91177308-0d34-0410-b5e6-96231b3b80d8
through the use of 'fpmath' metadata. Currently this only provides a 'fpaccuracy'
value, which may be a number in ULPs or the keyword 'fast', however the intent is
that this will be extended with additional information about NaN's, infinities
etc later. No optimizations have been hooked up to this so far.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154822 91177308-0d34-0410-b5e6-96231b3b80d8
and retrieving it from instructions. I don't have a use for this but is seems
logical for it to exist. While there, remove some 'const' markings from methods
which are in fact 'const' in practice, but aren't logically 'const'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154811 91177308-0d34-0410-b5e6-96231b3b80d8
so we don't want it to show up in the stable 3.1 interface.
While at it, add a comment about why LTOCodeGenerator manually creates the
internalize pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154807 91177308-0d34-0410-b5e6-96231b3b80d8
To be used in printing unprintable source in clang diagnostics.
Patch by Seth Cantrell, with a minor fix for mingw by me.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154805 91177308-0d34-0410-b5e6-96231b3b80d8
thinking of generalizing it to be able to specify other freedoms beyond accuracy
(such as that NaN's don't have to be respected). I'd like the 3.1 release (the
first one with this metadata) to have the more generic name already rather than
having to auto-upgrade it in 3.2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154744 91177308-0d34-0410-b5e6-96231b3b80d8
This is a special flag for targets that really want their block
terminators in the DAG. The default scheduler cannot handle this
correctly, so it becomes the specialized scheduler's responsibility to
schedule terminators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154712 91177308-0d34-0410-b5e6-96231b3b80d8
directly instead of a user Instruction. This allows them to test
whether a def dominates a particular operand if the user instruction
is a PHI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154631 91177308-0d34-0410-b5e6-96231b3b80d8
of zero-initialized sections, virtual sections and common symbols
and preventing the loading of sections which are not required for
execution such as debug information.
Patch by Andy Kaylor!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154610 91177308-0d34-0410-b5e6-96231b3b80d8
FoldingSet is implemented as a chained hash table. When there is a hash
collision during insertion, which is common as we fill the table until a
load factor of 2.0 is hit, we walk the chained elements, comparing every
operand with the new element's operands. This can be very expensive if the
MDNode has many operands.
We sacrifice a word of space in MDNode to cache the full hash value, reducing
compares on collision to a minimum. MDNode grows from 28 to 32 bytes + operands
on x86. On x86_64 the new bits fit nicely into existing padding, not growing
the struct at all.
The actual speedup depends a lot on the test case and is typically between
1% and 2% for C++ code with clang -c -O0 -g.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154497 91177308-0d34-0410-b5e6-96231b3b80d8
binary and assembly. Patch by Carlo Kok. Emitting was inspired by but not based
on the D llvm bindings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154493 91177308-0d34-0410-b5e6-96231b3b80d8
StringMap. This was redundant and unnecessarily bloated the MDString class.
Because the MDString class is a "Value" and will never have a "name", and
because the Name field in the Value class is a pointer to a StringMap entry, we
repurpose the Name field for an MDString. It stores the StringMap entry in the
Name field, and uses the normal methods to get the string (name) back.
PR12474
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154429 91177308-0d34-0410-b5e6-96231b3b80d8
Take this opportunity to generalize the indirectbr bailout logic for
loop transformations. CFG transformations will never get indirectbr
right, and there's no point trying.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154386 91177308-0d34-0410-b5e6-96231b3b80d8
legalizer always use the DAG entry node. This is wrong when the libcall is
emitted as a tail call since it effectively folds the return node. If
the return node's input chain is not the entry (i.e. call, load, or store)
use that as the tail call input chain.
PR12419
rdar://9770785
rdar://11195178
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154370 91177308-0d34-0410-b5e6-96231b3b80d8
A couple of cases where we were accidentally creating constant conditions by
something like "x == a || b" instead of "x == a || x == b". In one case a
conditional & then unreachable was used - I transformed this into a direct
assert instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154324 91177308-0d34-0410-b5e6-96231b3b80d8
optimizations which are valid for position independent code being linked
into a single executable, but not for such code being linked into
a shared library.
I discussed the design of this with Eric Christopher, and the decision
was to support an optional bit rather than a completely separate
relocation model. Fundamentally, this is still PIC relocation, its just
that certain optimizations are only valid under a PIC relocation model
when the resulting code won't be in a shared library. The simplest path
to here is to expose a single bit option in the TargetOptions. If folks
have different/better designs, I'm all ears. =]
I've included the first optimization based upon this: changing TLS
models to the *Exec models when PIE is enabled. This is the LLVM
component of PR12380 and is all of the hard work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154294 91177308-0d34-0410-b5e6-96231b3b80d8
in TargetLowering. There was already a FIXME about this location being
odd. The interface is simplified as a consequence. This will also make
it easier to change TLS models when compiling with PIE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154292 91177308-0d34-0410-b5e6-96231b3b80d8
optimizers could do this for us, but expecting partial SROA of classes
with template methods through cloning is probably expecting too much
heroics. With this change, the begin/end pointer pairs which indicate
the status of each loop iteration are actually passed directly into each
layer of the combine_data calls, and the inliner has a chance to see
when most of the combine_data function could be deleted by inlining.
Similarly for 'length'.
We have to be careful to limit the places where in/out reference
parameters are used as those will also defeat the inliner / optimizers
from properly propagating constants.
With this change, LLVM is able to fully inline and unroll the hash
computation of small sets of values, such as two or three pointers.
These now decompose into essentially straight-line code with no loops or
function calls.
There is still one code quality problem to be solved with the hashing --
LLVM is failing to nuke the alloca. It removes all loads from the
alloca, leaving only lifetime intrinsics and dead(!!) stores to the
alloca. =/ Very unfortunate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154264 91177308-0d34-0410-b5e6-96231b3b80d8
by default.
This is a behaviour configurable in the MCAsmInfo. I've decided to turn
it on by default in (possibly optimistic) hopes that most assemblers are
reasonably sane. If this proves a problem, switching to default seems
reasonable.
I'm not sure if this is the opportune place to test, but it seemed good
to make sure it was tested somewhere.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154235 91177308-0d34-0410-b5e6-96231b3b80d8
The empty 1-argument operator delete is for the benefit of the
destructor. A couple of spot checks of running yaml-bench under
valgrind against a few of the files under test/YAMLParser did
not reveal any leaks introduced by this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154137 91177308-0d34-0410-b5e6-96231b3b80d8
of the BBVectorizePass without using command line option. As pointed out
by Hal, we can ask the TargetLoweringInfo for the architecture specific
VectorizeConfig to perform vectorizing with architecture specific
information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154096 91177308-0d34-0410-b5e6-96231b3b80d8
BasicBlock in other passes, e.g. we can call vectorizeBasicBlock in the
loop unroll pass right after the loop is unrolled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154089 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to keep passing reduced masks to SimplifyDemandedBits, but
know about all the bits if SimplifyDemandedBits fails. This allows instcombine
to simplify cases like the one in the included testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154011 91177308-0d34-0410-b5e6-96231b3b80d8
The colorability heuristic should count these as denied registers.
No test case - this exposed a bug on an out-of-tree target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153958 91177308-0d34-0410-b5e6-96231b3b80d8
brace) so that we get more accurate line number information about the
declaration of a given function and the line where the function
first starts.
Part of rdar://11026482
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153916 91177308-0d34-0410-b5e6-96231b3b80d8
This patch allows llvm to recognize that a 64 bit object file is being produced
and that the subsequently generated ELF header has the correct information.
The test case checks for both big and little endian flavors.
Patch by Jack Carter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153889 91177308-0d34-0410-b5e6-96231b3b80d8
rather than a bitfield, a great suggestion by Chris during code review.
There is still quite a bit of cruft in the interface, but that requires
sorting out some awkward uses of the cost inside the actual inliner.
No functionality changed intended here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153853 91177308-0d34-0410-b5e6-96231b3b80d8
This also avoids emitting the information twice, which led to code bloat. On i386-linux-Release+Asserts
with all targets built this change shaves a whopping 1.3 MB off clang. The number is probably exaggerated
by recent inliner changes but the methods were already enormous with the old inline cost computation.
The DWARF reg -> LLVM reg mapping doesn't seem to have holes in it, so it could be a simple lookup table.
I didn't implement that optimization yet to avoid potentially changing functionality.
There is still some duplication both in tablegen and the generated code that should be cleaned up eventually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153837 91177308-0d34-0410-b5e6-96231b3b80d8
This is the CodeGen equivalent of r153747. I tested that there is not noticeable
performance difference with any combination of -O0/-O2 /-g when compiling
gcc as a single compilation unit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153817 91177308-0d34-0410-b5e6-96231b3b80d8
interfaces. These methods were used in the old inline cost system where
there was a persistent cache that had to be updated, invalidated, and
cleared. We're now doing more direct computations that don't require
this intricate dance. Even if we resume some level of caching, it would
almost certainly have a simpler and more narrow interface than this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153813 91177308-0d34-0410-b5e6-96231b3b80d8
on a per-callsite walk of the called function's instructions, in
breadth-first order over the potentially reachable set of basic blocks.
This is a major shift in how inline cost analysis works to improve the
accuracy and rationality of inlining decisions. A brief outline of the
algorithm this moves to:
- Build a simplification mapping based on the callsite arguments to the
function arguments.
- Push the entry block onto a worklist of potentially-live basic blocks.
- Pop the first block off of the *front* of the worklist (for
breadth-first ordering) and walk its instructions using a custom
InstVisitor.
- For each instruction's operands, re-map them based on the
simplification mappings available for the given callsite.
- Compute any simplification possible of the instruction after
re-mapping, and store that back int othe simplification mapping.
- Compute any bonuses, costs, or other impacts of the instruction on the
cost metric.
- When the terminator is reached, replace any conditional value in the
terminator with any simplifications from the mapping we have, and add
any successors which are not proven to be dead from these
simplifications to the worklist.
- Pop the next block off of the front of the worklist, and repeat.
- As soon as the cost of inlining exceeds the threshold for the
callsite, stop analyzing the function in order to bound cost.
The primary goal of this algorithm is to perfectly handle dead code
paths. We do not want any code in trivially dead code paths to impact
inlining decisions. The previous metric was *extremely* flawed here, and
would always subtract the average cost of two successors of
a conditional branch when it was proven to become an unconditional
branch at the callsite. There was no handling of wildly different costs
between the two successors, which would cause inlining when the path
actually taken was too large, and no inlining when the path actually
taken was trivially simple. There was also no handling of the code
*path*, only the immediate successors. These problems vanish completely
now. See the added regression tests for the shiny new features -- we
skip recursive function calls, SROA-killing instructions, and high cost
complex CFG structures when dead at the callsite being analyzed.
Switching to this algorithm required refactoring the inline cost
interface to accept the actual threshold rather than simply returning
a single cost. The resulting interface is pretty bad, and I'm planning
to do lots of interface cleanup after this patch.
Several other refactorings fell out of this, but I've tried to minimize
them for this patch. =/ There is still more cleanup that can be done
here. Please point out anything that you see in review.
I've worked really hard to try to mirror at least the spirit of all of
the previous heuristics in the new model. It's not clear that they are
all correct any more, but I wanted to minimize the change in this single
patch, it's already a bit ridiculous. One heuristic that is *not* yet
mirrored is to allow inlining of functions with a dynamic alloca *if*
the caller has a dynamic alloca. I will add this back, but I think the
most reasonable way requires changes to the inliner itself rather than
just the cost metric, and so I've deferred this for a subsequent patch.
The test case is XFAIL-ed until then.
As mentioned in the review mail, this seems to make Clang run about 1%
to 2% faster in -O0, but makes its binary size grow by just under 4%.
I've looked into the 4% growth, and it can be fixed, but requires
changes to other parts of the inliner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153812 91177308-0d34-0410-b5e6-96231b3b80d8
visitor will now visit a CallInst and an InvokeInst with
instruction-specific visitors, then visit a generic CallSite visitor,
then delegate back to the Instruction visitor and the TerminatorInst
visitors depending on whether a call or an invoke originally. This will
be used in the soon-to-land inline cost rewrite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153811 91177308-0d34-0410-b5e6-96231b3b80d8
Use an explicit comparator instead of the default.
The sets are sorted, but not using the default comparator. Hopefully,
this will unbreak the Linux builders.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153772 91177308-0d34-0410-b5e6-96231b3b80d8
TableGen emits lists of sub-registers, super-registers, and overlaps. Put
them all in a single table and use a SequenceToOffsetTable to share
suffixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153761 91177308-0d34-0410-b5e6-96231b3b80d8
1. The main works will made in the RuntimeDyLdImpl with uses the ObjectFile class. RuntimeDyLdMachO and RuntimeDyLdELF now only parses relocations and resolve it. This is allows to make improvements of the RuntimeDyLd more easily. In addition the support for COFF can be easily added.
2. Added ARM relocations to RuntimeDyLdELF.
3. Added support for stub functions for the ARM, allowing to do a long branch.
4. Added support for external functions that are not loaded from the object files, but can be loaded from external libraries. Now MCJIT can correctly execute the code containing the printf, putc, and etc.
5. The sections emitted instead functions, thanks Jim Grosbach. MemoryManager.startFunctionBody() and MemoryManager.endFunctionBody() have been removed.
6. MCJITMemoryManager.allocateDataSection() and MCJITMemoryManager. allocateCodeSection() used JMM->allocateSpace() instead of JMM->allocateCodeSection() and JMM->allocateDataSection(), because I got an error: "Cannot allocate an allocated block!" with object file contains more than one code or data sections.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153754 91177308-0d34-0410-b5e6-96231b3b80d8
Some targets still mess up the liveness information, but that isn't
verified after MRI->invalidateLiveness().
The verifier can still check other useful things like register classes
and CFG, so it should be enabled after all passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153615 91177308-0d34-0410-b5e6-96231b3b80d8
blocks in the function cloner. This removes the last case of trivially
dead code that I've been seeing in the wild getting inlined, analyzed,
re-inlined, optimized, only to be deleted. Nukes a FIXME from the
cleanup tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153572 91177308-0d34-0410-b5e6-96231b3b80d8
Late optimization passes like branch folding and tail duplication can
transform the machine code in a way that makes it expensive to keep the
register liveness information up to date. There is a fuzzy line between
register allocation and late scheduling where the liveness information
degrades.
The MRI::tracksLiveness() flag makes the line clear: While true,
liveness information is accurate, and can be used for register
scavenging. Once the flag is false, liveness information is not
accurate, and can only be used as a hint.
Late passes generally don't need the liveness information, but they will
sometimes use the register scavenger to help update it. The scavenger
enforces strict correctness, and we have to spend a lot of code to
update register liveness that may never be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153511 91177308-0d34-0410-b5e6-96231b3b80d8
bit simpler by handling a common case explicitly.
Also, refactor the implementation to use a worklist based walk of the
recursive users, rather than trying to use value handles to detect and
recover from RAUWs during the recursive descent. This fixes a very
subtle bug in the previous implementation where degenerate control flow
structures could cause mutually recursive instructions (PHI nodes) to
collapse in just such a way that From became equal to To after some
amount of recursion. At that point, we hit the inf-loop that the assert
at the top attempted to guard against. This problem is defined away when
not using value handles in this manner. There are lots of comments
claiming that the WeakVH will protect against just this sort of error,
but they're not accurate about the actual implementation of WeakVHs,
which do still track RAUWs.
I don't have any test case for the bug this fixes because it requires
running the recursive simplification on unreachable phi nodes. I've no
way to either run this or easily write an input that triggers it. It was
found when using instruction simplification inside the inliner when
running over the nightly test-suite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153393 91177308-0d34-0410-b5e6-96231b3b80d8
This is necessary if the client wants to be able to mutate TargetOptions (for example, fast FP math mode) after the initial creation of the ExecutionEngine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153342 91177308-0d34-0410-b5e6-96231b3b80d8
the PassManager annoying and should be reimplemented as a decorator
on top of existing passes (as should the timing data).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153305 91177308-0d34-0410-b5e6-96231b3b80d8
(and hopefully on Windows). The bots have been down most of the day
because of this, and it's not clear to me what all will be required to
fix it.
The commits started with r153205, then r153207, r153208, and r153221.
The first commit seems to be the real culprit, but I couldn't revert
a smaller number of patches.
When resubmitting, r153207 and r153208 should be folded into r153205,
they were simple build fixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153241 91177308-0d34-0410-b5e6-96231b3b80d8
1. Declare a virtual function getPointerToNamedFunction() in JITMemoryManager
2. Move the implementation of getPointerToNamedFunction() form JIT/MCJIT to DefaultJITMemoryManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153205 91177308-0d34-0410-b5e6-96231b3b80d8
Remaining "uncategorized" functions have been organized into their
proper place in the hierarchy. Some functions were moved around so
groups are defined together.
No code changes were made.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153169 91177308-0d34-0410-b5e6-96231b3b80d8
This gives a lot of love to the docs for the C API. Like Clang's
documentation, the C API is now organized into a Doxygen "module"
(LLVMC). Each C header file is a child of the main module. Some modules
(like Core) have a hierarchy of there own. The produced documentation is
thus better organized (before everything was in one monolithic list).
This patch also includes a lot of new documentation for APIs in Core.h.
It doesn't document them all, but is better than none. Function docs are
missing @param and @return annotation, but the documentation body now
commonly provides help details (like the expected llvm::Value sub-type
to expect).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153157 91177308-0d34-0410-b5e6-96231b3b80d8
ImmutAVLTree uses random unsigned values as keys into a DenseMap,
which could possibly happen to be the same value as the Tombstone or
Entry keys in the DenseMap.
Test case is hard to come up with. We randomly get failures on the
internal static analyzer bot, which most likely hits this issue
(hard to be 100% sure without the full stack).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@153148 91177308-0d34-0410-b5e6-96231b3b80d8
