This new version is much more aggressive about doing "full" reduction in
cases where it reduces register pressure, and also more aggressive about
rewriting induction variables to count down (or up) to zero when doing so
reduces register pressure.
It currently uses fairly simplistic algorithms for finding reuse
opportunities, but it introduces a new framework allows it to combine
multiple strategies at once to form hybrid solutions, instead of doing
all full-reduction or all base+index.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@94061 91177308-0d34-0410-b5e6-96231b3b80d8
form of an expression. This is the expression without the
post-increment adjustment made, which is useful in determining
which registers will be used by the expansion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93921 91177308-0d34-0410-b5e6-96231b3b80d8
Nodes that had children outside of the post dominator tree (infinite loops)
where removed from the post dominator tree. This seems to be wrong. Leave them
in the tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93633 91177308-0d34-0410-b5e6-96231b3b80d8
Move the DOTGraphTraits dotty printer/viewer templates, that were developed for
the dominance tree into their own header file. This will allow reuse in future
passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93632 91177308-0d34-0410-b5e6-96231b3b80d8
This patch also cleans up code that expects there to be a bitcast in the first argument and testcases that call llvm.dbg.declare.
It also strips old llvm.dbg.declare intrinsics that did not pass metadata as the first argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93531 91177308-0d34-0410-b5e6-96231b3b80d8
This patch also cleans up code that expects there to be a bitcast in the first argument and testcases that call llvm.dbg.declare.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93504 91177308-0d34-0410-b5e6-96231b3b80d8
Make InsertDbgValueIntrinsic() and get Offset take and recieve a uint64_t.
Get constness correct for getVariable() and getValue().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@93149 91177308-0d34-0410-b5e6-96231b3b80d8
Compare the dominance information calculated using a dominance tree walk to the
information calculated based on DFS numbers, if XDEBUG is enabled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92969 91177308-0d34-0410-b5e6-96231b3b80d8
Remove a FIXME and unify code that was necessary to work around broken
updateDFSNumbers(). Before updateDFSNumbers() did not work correctly for post
dominators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92968 91177308-0d34-0410-b5e6-96231b3b80d8
The DFS number calculation for postdominators was broken. In the case of
multiple exits that form the post dominator root nodes, do not iterate over
all exits, but start from the virtual root node. Otherwise bbs, that are not
post dominated by any exit but by the virtual root node, will never be assigned
a DFS number.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92967 91177308-0d34-0410-b5e6-96231b3b80d8
memcpy, memset and other intrinsics that only access their arguments
to be readnone if the intrinsic's arguments all point to local memory.
This improves the testcase in the README to readonly, but it could in
theory be made readnone, however this would involve more sophisticated
analysis that looks through the memcpy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@92829 91177308-0d34-0410-b5e6-96231b3b80d8
instead of stored. This reduces memdep memory usage, and also eliminates a bunch of
weakvh's. This speeds up gvn on gcc.c-torture/20001226-1.c from 23.9s to 8.45s (2.8x)
on a different machine than earlier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91885 91177308-0d34-0410-b5e6-96231b3b80d8
contains another loop, or an instruction. The loop form is
substantially more efficient on large loops than the typical
code it replaces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91654 91177308-0d34-0410-b5e6-96231b3b80d8
of 91296 that caused trouble -- the Processed list needs to be
preserved for the livetime of the pass, as AddUsersIfInteresting
is called from other passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91641 91177308-0d34-0410-b5e6-96231b3b80d8
isPodLike type trait. This is a generally useful type trait for
more than just DenseMap, and we really care about whether something
acts like a pod, not whether it really is a pod.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@91421 91177308-0d34-0410-b5e6-96231b3b80d8
phi translation of complex expressions like &A[i+1]. This has the
following benefits:
1. The phi translation logic is all contained in its own class with
a strong interface and verification that it is self consistent.
2. The logic is more correct than before. Previously, if intermediate
expressions got PHI translated, we'd miss the update and scan for
the wrong pointers in predecessor blocks. @phi_trans2 is a testcase
for this.
3. We have a lot less code in memdep.
We can handle phi translation across blocks of things like @phi_trans3,
which is pretty insane :).
This patch should fix the miscompiles of 255.vortex, and I tested it
with a bootstrap of llvm-gcc, llvm-test and dejagnu of course.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90926 91177308-0d34-0410-b5e6-96231b3b80d8
The semantics of llvm.dbg.value are that starting from where it is executed, an offset into the specified user source variable is specified to get a new value.
An example:
call void @llvm.dbg.value(metadata !{ i32 7 }, i64 0, metadata !2)
Here the user source variable associated with metadata #2 gets the value "i32 7" at offset 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90788 91177308-0d34-0410-b5e6-96231b3b80d8
gvn (this is just a skeleton so far). This will ultimately be used
to fix a nasty miscompilation with GVN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90518 91177308-0d34-0410-b5e6-96231b3b80d8
where it is not available. It's unclear how to get this inserted
computation into GVN's scalar availability sets, Owen, help? :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89997 91177308-0d34-0410-b5e6-96231b3b80d8
The hasNoModRefInfoForCalls isn't worth it as a filter because
basicaa provides m/r info and everything chains to it, so remove
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89599 91177308-0d34-0410-b5e6-96231b3b80d8
it may be used in contexts where preheader insertion may have failed due
to an indirectbr.
Make LoopSimplify's LoopSimplify::SeparateNestedLoop properly fail in
the case that it would require splitting an indirectbr edge.
These fix PR5502.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89484 91177308-0d34-0410-b5e6-96231b3b80d8
if it is not ultimately captured. Teach BasicAliasAnalysis that a
local object address which does not escape and is never stored does
not alias with a value resulting from a load.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@89398 91177308-0d34-0410-b5e6-96231b3b80d8
cannot be folded into target cmp instruction.
- Avoid a phase ordering issue where early cmp optimization would prevent the
later count-to-zero optimization.
- Add missing checks which could cause LSR to reuse stride that does not have
users.
- Fix a bug in count-to-zero optimization code which failed to find the pre-inc
iv's phi node.
- Remove, tighten, loosen some incorrect checks disable valid transformations.
- Quite a bit of code clean up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86969 91177308-0d34-0410-b5e6-96231b3b80d8
This allows StringRef to skip controversial if(str) check in constructor.
Buildbots, wait for corresponding clang and llvm-gcc FE check-ins!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86914 91177308-0d34-0410-b5e6-96231b3b80d8
start using them in a trivial way when -enable-jump-threading-lvi
is passed. enable-jump-threading-lvi will be my playground for
awhile.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86789 91177308-0d34-0410-b5e6-96231b3b80d8
except that the result may not be a constant. Switch jump threading to
use it so that it gets things like (X & 0) -> 0, which occur when phi preds
are deleted and the remaining phi pred was a zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86637 91177308-0d34-0410-b5e6-96231b3b80d8
This patch forbids implicit conversion of DenseMap::const_iterator to
DenseMap::iterator which was possible because DenseMapIterator inherited
(publicly) from DenseMapConstIterator. Conversion the other way around is now
allowed as one may expect.
The template DenseMapConstIterator is removed and the template parameter
IsConst which specifies whether the iterator is constant is added to
DenseMapIterator.
Actually IsConst parameter is not necessary since the constness can be
determined from KeyT but this is not relevant to the fix and can be addressed
later.
Patch by Victor Zverovich!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86636 91177308-0d34-0410-b5e6-96231b3b80d8
Simplify[IF]Cmp pieces. Add some predicates to CmpInst to
determine whether a predicate is fp or int.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86624 91177308-0d34-0410-b5e6-96231b3b80d8
takes decimated instructions and applies identities to them. This
is pretty minimal at this point, but I plan to pull some instcombine
logic out into these and similar routines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86613 91177308-0d34-0410-b5e6-96231b3b80d8
Here is the original commit message:
This commit updates malloc optimizations to operate on malloc calls that have constant int size arguments.
Update CreateMalloc so that its callers specify the size to allocate:
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86311 91177308-0d34-0410-b5e6-96231b3b80d8
MallocInst-autoupgrade users use non-TargetData-computed allocation sizes.
Optimization uses use TargetData to compute the allocation size.
Now that malloc calls can have constant sizes, update isArrayMallocHelper() to use TargetData to determine the size of the malloced type and the size of malloced arrays.
Extend getMallocType() to support malloc calls that have non-bitcast uses.
Update OptimizeGlobalAddressOfMalloc() to optimize malloc calls that have non-bitcast uses. The bitcast use of a malloc call has to be treated specially here because the uses of the bitcast need to be replaced and the bitcast needs to be erased (just like the malloc call) for OptimizeGlobalAddressOfMalloc() to work correctly.
Update PerformHeapAllocSRoA() to optimize malloc calls that have non-bitcast uses. The bitcast use of the malloc is not handled specially here because ReplaceUsesOfMallocWithGlobal replaces through the bitcast use.
Update OptimizeOnceStoredGlobal() to not care about the malloc calls' bitcast use.
Update all globalopt malloc tests to not rely on autoupgraded-MallocInsts, but instead use explicit malloc calls with correct allocation sizes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86077 91177308-0d34-0410-b5e6-96231b3b80d8
ArraySize * ElementSize
ElementSize * ArraySize
ArraySize << log2(ElementSize)
ElementSize << log2(ArraySize)
Refactor isArrayMallocHelper and delete isSafeToGetMallocArraySize, so that there is only 1 copy of the malloc array determining logic.
Update users of getMallocArraySize() to not bother calling isArrayMalloc() as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85421 91177308-0d34-0410-b5e6-96231b3b80d8
Remove LowerAllocations pass.
Update some more passes to treate free calls just like they were treating FreeInst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85176 91177308-0d34-0410-b5e6-96231b3b80d8
used elsewhere - an exit block is a block outside the loop branched to
from within the loop. An exiting block is a block inside the loop that
branches out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85019 91177308-0d34-0410-b5e6-96231b3b80d8
Update all analysis passes and transforms to treat free calls just like FreeInst.
Remove RaiseAllocations and all its tests since FreeInst no longer needs to be raised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84987 91177308-0d34-0410-b5e6-96231b3b80d8
Analysis/ConstantFolding.cpp. This doesn't change the behavior of
instcombine but makes other clients of ConstantFoldInstruction
able to handle loads. This was partially extracted from Eli's patch
in PR3152.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84836 91177308-0d34-0410-b5e6-96231b3b80d8
identifying the malloc as a non-array malloc. This broke GlobalOpt's optimization of stores of mallocs
to global variables.
The fix is to classify malloc's into 3 categories:
1. non-array mallocs
2. array mallocs whose array size can be determined
3. mallocs that cannot be determined to be of type 1 or 2 and cannot be optimized
getMallocArraySize() returns NULL for category 3, and all users of this function must avoid their
malloc optimization if this function returns NULL.
Eventually, currently unexpected codegen for computing the malloc's size argument will be supported in
isArrayMalloc() and getMallocArraySize(), extending malloc optimizations to those examples.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84199 91177308-0d34-0410-b5e6-96231b3b80d8
"LoopVR's logic was copied into ScalarEvolution::getUnsignedRange and
::getSignedRange. Please delete LoopVR."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83531 91177308-0d34-0410-b5e6-96231b3b80d8
question, can we get rid of the BasicBlock versions of all inserters
and use Head == 0 to indicate the old case when GetInsertBlock == 0?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83216 91177308-0d34-0410-b5e6-96231b3b80d8
information. This allows arbitrary code involving DW_OP_plus_uconst
and DW_OP_deref. The scheme allows for easy extention to include,
any, or all of the DW_OP_ opcodes. I thought about just exposing all
of them, but, wasn't sure if people wanted the dwarf opcodes exposed
in the api. Is that a layering violation?
With this scheme, the entire existing block scheme used by llvm-gcc
can be switched over to the new scheme. I think that would be
cleaner, as then the compiler specific bits are not present in llvm
proper. Before the old code can be yanked however, similar code in
clang would have to be removed.
Next up, more testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83120 91177308-0d34-0410-b5e6-96231b3b80d8
the PassManager code into a regular verifyAnalysis method.
Also, reorganize loop verification. Make the LoopPass infrastructure
call verifyLoop as needed instead of having LoopInfo::verifyAnalysis
check every loop in the function after each looop pass. Add a new
command-line argument, -verify-loop-info, to enable the expensive
full checking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82952 91177308-0d34-0410-b5e6-96231b3b80d8
