Different object formats represent references from dwarf in different ways.
ELF uses a relocation to the referenced point (except for .dwo) and
COFF/MachO use the offset of the referenced point inside its section.
This patch renames emitSectionOffset because
* It doesn't produce an offset on ELF.
* It changes behavior depending on how DWARF is represented, so adding
dwarf to its name is probably a good thing.
The patch also adds an option to force the use of offsets.That avoids
funny looking code like
if (!UseOffsets)
Asm->emitSectionOffset....
It was correct, but read as if the ! was inverted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239866 91177308-0d34-0410-b5e6-96231b3b80d8
The original change broke clang side tests. I will be submitting those momentarily. This change includes post commit feedback on the original change from from Pete Cooper.
Original Submission comments:
If a parameter to a function is known non-null, use the existing parameter attributes to record that fact at the call site. This has no optimization benefit by itself - that I know of - but is an enabling change for http://reviews.llvm.org/D9129.
Differential Revision: http://reviews.llvm.org/D9132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239849 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When propagating mass through irregular loops, the mass flowing through
each loop header may not be equal. This was causing wrong frequencies
to be computed for irregular loop headers.
Fixed by keeping track of masses flowing through each of the headers in
an irregular loop. To do this, we now keep track of per-header backedge
weights. After the loop mass is distributed through the loop, the
backedge weights are used to re-distribute the loop mass to the loop
headers.
Since each backedge will have a mass proportional to the different
branch weights, the loop headers will end up with a more approximate
weight distribution (as opposed to the current distribution that assumes
that every loop header is the same).
Reviewers: dexonsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10348
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239843 91177308-0d34-0410-b5e6-96231b3b80d8
LaneMasks as given by getSubRegIndexLaneMask() have a limited number of
of bits, so for targets with more than 31 disjunct subregister there may
be cases where:
getSubReg(Reg,A) does not overlap getSubReg(Reg,B)
but we still have
(getSubRegIndexLaneMask(A) & getSubRegIndexLaneMask(B)) != 0.
I had hoped to keep this an implementation detail of the tablegen but as
my next commit shows we can avoid unnecessary imp-defs operands if we
know that the lane masks in use are precise.
This is in preparation to http://reviews.llvm.org/D10470.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239837 91177308-0d34-0410-b5e6-96231b3b80d8
A reduction is a special kind of recurrence. In the loop vectorizer we currently
identify basic reductions. Future patches will extend this to identifying basic
recurrences.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239835 91177308-0d34-0410-b5e6-96231b3b80d8
This is an updated version of the patch that was checked in at:
http://reviews.llvm.org/rL237046
but subsequently reverted because it exposed a bug in the DAG Combiner:
http://reviews.llvm.org/D9893
This time, there's an enablement flag ("EnableFMFInDAG") around the code in
SelectionDAGBuilder where we copy the set of FP optimization flags from IR
instructions to DAG nodes. So, in theory, there should be no functional change
from this patch as-is, but it will allow testing with the added functionality
to proceed via "-enable-fmf-dag" passed to llc.
This patch adds the minimum plumbing necessary to use IR-level
fast-math-flags (FMF) in the backend without actually using
them for anything yet. This is a follow-on to:
http://reviews.llvm.org/rL235997
Differential Revision: http://reviews.llvm.org/D10403
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239828 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10381
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239815 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This affects other tools so the previous C++ API has been retained as a
deprecated function for the moment. Clang has been updated with a trivial
patch (not covered by the pre-commit review) to avoid breaking -Werror builds.
Other in-tree tools will be fixed with similar patches.
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
The first time this was committed it accidentally fixed an inconsistency in
triples in llvm-mc and this caused a failure. This inconsistency was fixed in
r239808.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10366
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239812 91177308-0d34-0410-b5e6-96231b3b80d8
constants in commented-out part of LLVMAttribute enum. Add tests that verify
that the safestack attribute is only allowed as a function attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239772 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the safe stack instrumentation pass to LLVM, which separates
the program stack into a safe stack, which stores return addresses, register
spills, and local variables that are statically verified to be accessed
in a safe way, and the unsafe stack, which stores everything else. Such
separation makes it much harder for an attacker to corrupt objects on the
safe stack, including function pointers stored in spilled registers and
return addresses. You can find more information about the safe stack, as
well as other parts of or control-flow hijack protection technique in our
OSDI paper on code-pointer integrity (http://dslab.epfl.ch/pubs/cpi.pdf)
and our project website (http://levee.epfl.ch).
The overhead of our implementation of the safe stack is very close to zero
(0.01% on the Phoronix benchmarks). This is lower than the overhead of
stack cookies, which are supported by LLVM and are commonly used today,
yet the security guarantees of the safe stack are strictly stronger than
stack cookies. In some cases, the safe stack improves performance due to
better cache locality.
Our current implementation of the safe stack is stable and robust, we
used it to recompile multiple projects on Linux including Chromium, and
we also recompiled the entire FreeBSD user-space system and more than 100
packages. We ran unit tests on the FreeBSD system and many of the packages
and observed no errors caused by the safe stack. The safe stack is also fully
binary compatible with non-instrumented code and can be applied to parts of
a program selectively.
This patch is our implementation of the safe stack on top of LLVM. The
patches make the following changes:
- Add the safestack function attribute, similar to the ssp, sspstrong and
sspreq attributes.
- Add the SafeStack instrumentation pass that applies the safe stack to all
functions that have the safestack attribute. This pass moves all unsafe local
variables to the unsafe stack with a separate stack pointer, whereas all
safe variables remain on the regular stack that is managed by LLVM as usual.
- Invoke the pass as the last stage before code generation (at the same time
the existing cookie-based stack protector pass is invoked).
- Add unit tests for the safe stack.
Original patch by Volodymyr Kuznetsov and others at the Dependable Systems
Lab at EPFL; updates and upstreaming by myself.
Differential Revision: http://reviews.llvm.org/D6094
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239761 91177308-0d34-0410-b5e6-96231b3b80d8
This commit connects the machine function analysis pass (which creates machine
functions) to the MIR parser, which will initialize the machine functions
with the state from the MIR file and reconstruct the machine IR.
This commit introduces a new interface called 'MachineFunctionInitializer',
which can be used to provide custom initialization for the machine functions.
This commit also introduces a new diagnostic class called
'DiagnosticInfoMIRParser' which is used for MIR parsing errors.
This commit modifies the default diagnostic handling in LLVMContext - now the
the diagnostics are printed directly into llvm::errs() so that the MIR parsing
errors can be printed with colours.
Reviewers: Justin Bogner
Differential Revision: http://reviews.llvm.org/D9928
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239753 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
NFC: no one uses AnalyzeBranchPredicate yet.
Add TargetInstrInfo::AnalyzeBranchPredicate and implement for x86. A
later change adding support for page-fault based implicit null checks
depends on this.
Reviewers: reames, ab, atrick
Reviewed By: atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239742 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
TargetInstrInfo::getLdStBaseRegImmOfs to
TargetInstrInfo::getMemOpBaseRegImmOfs and implement for x86. The
implementation only handles a few easy cases now and will be made more
sophisticated in the future.
This is NFCI: the only user of `getLdStBaseRegImmOfs` (now
`getmemOpBaseRegImmOfs`) is `LoadClusterMotion` and `LoadClusterMotion`
is disabled for x86.
Reviewers: reames, ab, MatzeB, atrick
Reviewed By: MatzeB, atrick
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239741 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This instruction encodes a loading operation that may fault, and a label
to branch to if the load page-faults. The locations of potentially
faulting loads and their "handler" destinations are recorded in a
FaultMap section, meant to be consumed by LLVM's clients.
Nothing generates FAULTING_LOAD_OP instructions yet, but they will be
used in a future change.
The documentation (FaultMaps.rst) needs improvement and I will update
this diff with a more expanded version shortly.
Depends on D10196
Reviewers: rnk, reames, AndyAyers, ab, atrick, pgavlin
Reviewed By: atrick, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10197
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239740 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This affects other tools so the previous C++ API has been retained as a
deprecated function for the moment. Clang has been updated with a trivial
patch (not covered by the pre-commit review) to avoid breaking -Werror builds.
Other in-tree tools will be fixed with similar trivial patches.
This continues the patch series to eliminate StringRef forms of GNU triples
from the internals of LLVM that began in r239036.
Reviewers: rengolin
Reviewed By: rengolin
Subscribers: llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D10366
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239721 91177308-0d34-0410-b5e6-96231b3b80d8
StringSaver now always saves to a BumpPtrAllocator.
The only reason for having the virtual saveImpl is so lld can have a
thread safe version.
The reason for the distinct BumpPtrStringSaver class is to avoid the
virtual destructor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239669 91177308-0d34-0410-b5e6-96231b3b80d8
r213101 changed the behaviour of this method to not only affect the
PostMachineScheduler scheduler but also the PostRAScheduler scheduler,
renaming should make this fact clear. Also document that the preferred
way is to specify this in the scheduling model instead of overriding
this method.
Differential Revision: http://reviews.llvm.org/D10427
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239659 91177308-0d34-0410-b5e6-96231b3b80d8
into partitions. Also, add an option to clone stub definitions (not just decls)
into partitions: these definitions could be inlined in some places to avoid the
overhead of calling via the stub.
Found by inspection - no test case yet, although I plan to add a unit test for
this once the CompileOnDemand layer refactoring settles down.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239640 91177308-0d34-0410-b5e6-96231b3b80d8
Based on ArchType, Clang's driver can select a non-Clang compiler.
String parsing in Clang would have sufficed if it were only that,
however this change anticipates true llvm support.
Differential Revision: http://reviews.llvm.org/D10413
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239631 91177308-0d34-0410-b5e6-96231b3b80d8
MCSymbol.h already forwards declares MCExpr and only uses MCExpr* so doesn't
need to include the header.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239626 91177308-0d34-0410-b5e6-96231b3b80d8
For hung off uses, we need a Use* to tell use where the operands are.
This was User::OperandList but we want to remove that to save space
of all subclasses which aren't making use of 'hung off uses'.
Hung off uses now allocate their own 'OperandList' Use* in the
User::new which they call.
getOperandList() now uses the hung off uses bit to work out where the
Use* for the OperandList lives. If a User has hung off uses, then this
bit tells them to go back a single Use* from the User* and use that
value as the OperandList.
If a User has no hung off uses, then we get the first operand by
subtracting (NumOperands * sizeof(Use)) from the User this pointer.
This saves a pointer from User and all subclasses. Given the average
size of a subclass of User is 112 or 128 bytes, this saves around 7% of space
With malloc tending to align to 16-bytes the real saving is typically more like 3.5%.
On 'opt -O2 verify-uselistorder.lto.bc', peak memory usage prior to this change
is 149MB and after is 143MB so the savings are around 2.5% of peak.
Looking at some passes which allocate many Instructions and Values, parseIR drops
from 54.25MB to 52.21MB while the Inliner calls to Instruction::clone() drops
from 28.20MB to 27.05MB.
Reviewed by Duncan Exon Smith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239623 91177308-0d34-0410-b5e6-96231b3b80d8
There are now 2 versions of User::new. The first takes a size_t and is the current
implementation for subclasses which need 0 or more Use's allocated for their operands.
The new version takes no extra arguments to say that this subclass needs 'hung off uses'.
The HungOffUses bool is now set in this version of User::new and we can assert in
allocHungOffUses that we are allowed to have hung off uses.
This ensures we call the correct version of User::new for subclasses which need hung off uses.
A future commit will then allocate space for a single Use* which will be used
in place of User::OperandList once that field has been removed.
Reviewed by Duncan Exon Smith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239622 91177308-0d34-0410-b5e6-96231b3b80d8
This is to try make it very clear that subclasses shouldn't be changing
the value directly. Now that OperandList for normal instructions is computed
using the NumOperands, its critical that the NumOperands is accurate or we
could compute the wrong offset to the first operand.
I looked over all places which update NumOperands and they are all safe.
Hung off use User's don't use NumOperands to compute the OperandList so they
are safe to continue to manipulate it. The only other User which changed it
was GlobalVariable which has an optional init list but always allocated space
for a single Use. It was correctly setting NumOperands to 1 before setting an
initializer, and setting it to 0 after clearing the init list, so the order was safe.
Added some comments to that code to make sure that this isn't changed in future
without being aware of this constraint.
Reviewed by Duncan Exon Smith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239621 91177308-0d34-0410-b5e6-96231b3b80d8
We don't want anyone to access OperandList directly as its going to be removed
and computed instead. This uses getter's and setter's instead in which we
can later change the underlying implementation of OperandList.
Reviewed by Duncan Exon Smith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239620 91177308-0d34-0410-b5e6-96231b3b80d8
The underlaying issues is that this code can't really know if an OS specific or
processor specific section number should return true or false.
One option would be to assert or return an error, but that looks like over
engineering since extensions are not that common.
It seems better to have these be direct implementation of the ELF spec so that
they are natural for someone familiar with ELF reading the code.
Code that does have to handle OS/Architecture specific values can do it at
a higher level.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239618 91177308-0d34-0410-b5e6-96231b3b80d8
