Multiplication is not dependent on signedness, so just treating
all input ranges as unsigned is not incorrect. However it will cause
overly pessimistic ranges (such as full-set) when used with signed
negative values.
Teach multiply to try to interpret its inputs as both signed and
unsigned, and then to take the most specific (smallest population)
as its result.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231483 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231270 91177308-0d34-0410-b5e6-96231b3b80d8
Add the final bits of API that `DIBuilder` needs before the new nodes
can be moved into place.
- Add `MDType::clone()` and `MDType::setFlags()` to support
`DIBuilder::createTypeWithFlags()`.
- Add `MDBasicType::get()` overload that just requires a tag and a
name, as a convenience for `DIBuilder::createUnspecifiedType()`.
- Add `MDLocalVariable::withInline()` and
`MDLocalVariable::withoutInline()` to support
`llvm::createInlinedVariable()` and
`llvm::cleanseInlinedVariable()`.
(Somehow these got lost inside the "move into place" patch I'm about to
commit -- better to commit separately!)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231079 91177308-0d34-0410-b5e6-96231b3b80d8
Fix `MDScope::getFile()` so that it correctly returns a valid `MDFile`
even when it's an instance of `MDFile`. This logic is necessary because
of r230057. I'm working on moving the new hierarchy into place
out-of-tree (on track to commit Monday morning, BTW), and this was
exposed by a few failing tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230871 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
Remove a newline from `AssemblyWriter::printMDNodeBody()`, and add one
to `AssemblyWriter::writeMDNode()`. NFCI for assembly output.
However, this drops an inconsistent newline from `Metadata::print()`
when `this` is an `MDNode`. Now the newline added by `Metadata::dump()`
won't look so verbose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230565 91177308-0d34-0410-b5e6-96231b3b80d8
Split debug info 'flags' bitfield over a vector so the current flags can
be iterated over. This API (in combination with r230107) will be used
for assembly support for symbolic constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230108 91177308-0d34-0410-b5e6-96231b3b80d8
Add `DIDescriptor::getFlag(StringRef)` and
`DIDescriptor::getFlagString(unsigned)`. The latter only converts exact
matches; I'll add separate API for breaking the flags bitfield up into
parts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230107 91177308-0d34-0410-b5e6-96231b3b80d8
When trying to match the current schema with the new debug info
hierarchy, I downgraded `SizeInBits`, `AlignInBits` and `OffsetInBits`
to 32-bits (oops!). Caught this while testing my upgrade script to move
the hierarchy into place. Bump it back up to 64-bits and update tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229933 91177308-0d34-0410-b5e6-96231b3b80d8
Add missing `nullptr` from `MDSubroutineType`'s operands for
`MDCompositeTypeBase::getIdentifier()` (and add tests for all the other
unused fields). This highlights just how crazy it is that
`MDSubroutineType` inherits from `MDCompositeTypeBase`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229926 91177308-0d34-0410-b5e6-96231b3b80d8
Follow-up to r229740, which removed `DITemplate*::getContext()` after my
upgrade script revealed that scopes are always `nullptr` for template
parameters. This is the other shoe: drop `scope:` from
`MDTemplateParameter` and its two subclasses. (Note: a bitcode upgrade
would be pointless, since the hierarchy hasn't been moved into place.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229791 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that `count: -1` is a special value indicating an empty
array, such as `Values` in:
struct T {
unsigned Count;
int Values[];
};
Handle it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229769 91177308-0d34-0410-b5e6-96231b3b80d8
Add `replaceElements()`, `replaceVTableHolder()`, and
`replaceTemplateParams()` to `MDCompositeTypeBase`. Included an
assertion in `replaceElements()` to match the one in
`DICompositeType::replaceArrays()`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229744 91177308-0d34-0410-b5e6-96231b3b80d8
Add missing specialized node overloads for `MDNode::clone()` (they were
on most of the node types already, but missing from the others).
`MDNode::clone()` returns `TempMDNode` (`std::unique_ptr<MDNode,...>`),
while `TempMDSubrange::clone()` (for example) returns the more
convenient `TempMDSubrange` (`std::unique_ptr<TempMDSubrange,...>`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229579 91177308-0d34-0410-b5e6-96231b3b80d8
Introduces a subset of C++14 integer sequences in STLExtras. This is
just enough to support unpacking a std::tuple into the arguments of
snprintf, we can add more of it when it's actually needed.
Also removes an ancient macro hack that leaks a macro into the global
namespace. Clean up users that made use of the convenient hack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229337 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM's include tree and the use of using declarations to hide the
'legacy' namespace for the old pass manager.
This undoes the primary modules-hostile change I made to keep
out-of-tree targets building. I sent an email inquiring about whether
this would be reasonable to do at this phase and people seemed fine with
it, so making it a reality. This should allow us to start bootstrapping
with modules to a certain extent along with making it easier to mix and
match headers in general.
The updates to any code for users of LLVM are very mechanical. Switch
from including "llvm/PassManager.h" to "llvm/IR/LegacyPassManager.h".
Qualify the types which now produce compile errors with "legacy::". The
most common ones are "PassManager", "PassManagerBase", and
"FunctionPassManager".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229094 91177308-0d34-0410-b5e6-96231b3b80d8
Port `DIExpression::Operand` over to `MDExpression::ExprOperand`. The
logic is needed directly in `MDExpression` to support printing in
assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229002 91177308-0d34-0410-b5e6-96231b3b80d8
Add new API for converting temporaries that may self-reference.
Self-referencing nodes are not allowed to be uniqued, so sending them
into `replaceWithUniqued()` is dangerous (and this commit adds
assertions that prevent it).
`replaceWithPermanent()` has similar semantics to `get()` followed by
calls to `replaceOperandWith()`. In particular, if there's a
self-reference, it returns a distinct node; otherwise, it returns a
uniqued one. Like `replaceWithUniqued()` and `replaceWithDistinct()`
(well, it calls out to them) it mutates the temporary node in place if
possible, only calling `replaceAllUsesWith()` on a uniquing collision.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228726 91177308-0d34-0410-b5e6-96231b3b80d8
I noticed this fields were never used in r228607, but I neglected to
propagate that into `MDTemplateParameter` until now. This really should
have been done before commit in r228640; sorry for the churn.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228652 91177308-0d34-0410-b5e6-96231b3b80d8
Add specialized debug info metadata nodes that match the `DIDescriptor`
wrappers (used by `DIBuilder`) closely. Assembly and bitcode support to
follow soon (it'll mostly just be obvious), but this sketches in today's
schema. This is the first big commit (well, the only *big* one aside
from the testcase changes that'll come when I move this into place) for
PR22464.
I've marked a bunch of obvious changes as `TODO`s in the source; I plan
to make those changes promptly after this hierarchy is moved underneath
`DIDescriptor`, but for now I'm aiming mostly to match the status quo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228640 91177308-0d34-0410-b5e6-96231b3b80d8
Remove unnecessary restriction of 24-bits for line numbers in
`MDLocation`.
The rest of the debug info schema (with the exception of local
variables) uses 32-bits for line numbers. As I introduce the
specialized nodes, it makes sense to canonicalize on one size or the
other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@228455 91177308-0d34-0410-b5e6-96231b3b80d8
Move debug-info-centred `Metadata` subclasses into their own
header/source file. A couple of private template functions are needed
from both `Metadata.cpp` and `DebugInfoMetadata.cpp`, so I've moved them
to `lib/IR/MetadataImpl.h`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@227835 91177308-0d34-0410-b5e6-96231b3b80d8
These things are potentially used for non-DWARF data (see the discussion
in PR22235), so take the `Dwarf` out of the name. Since the new name
gives fewer clues, update the doxygen to properly describe what they
are.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226874 91177308-0d34-0410-b5e6-96231b3b80d8
During `MDNode::deleteTemporary()`, call `replaceAllUsesWith(nullptr)`
to update all tracking references to `nullptr`.
This fixes PR22280, where inverted destruction order between tracking
references and the temporaries themselves caused a use-after-free in
`LLParser`.
An alternative fix would be to add an assertion that there are no users,
and continue to fix inverted destruction order in clients (like
`LLParser`), but instead I decided to make getting-teardown-right easy.
(If someone disagrees let me know.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226866 91177308-0d34-0410-b5e6-96231b3b80d8
As part of PR22235, introduce `DwarfNode` and `GenericDwarfNode`. The
former is a metadata node with a DWARF tag. The latter matches our
current (generic) schema of a header with string (and stringified
integer) data and an arbitrary number of operands.
This doesn't move it into place yet; that change will require a large
number of testcase updates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226529 91177308-0d34-0410-b5e6-96231b3b80d8
Add `MDNode::replaceWithUniqued()` and `MDNode::replaceWithDistinct()`,
which mutate temporary nodes to become uniqued or distinct. On uniquing
collisions, the unique version is returned and the node is deleted.
This takes advantage of temporary nodes being folded back in, and should
let me clean up some awkward logic in `MapMetadata()`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226510 91177308-0d34-0410-b5e6-96231b3b80d8
Change `MDTuple::getTemporary()` and `MDLocation::getTemporary()` to
return (effectively) `std::unique_ptr<T, MDNode::deleteTemporary>`, and
clean up call sites. (For now, `DIBuilder` call sites just call
`release()` immediately.)
There's an accompanying change in each of clang and polly to use the new
API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226504 91177308-0d34-0410-b5e6-96231b3b80d8
Remove `MDNodeFwdDecl` (as promised in r226481). Aside from API
changes, there's no real functionality change here.
`MDNode::getTemporary()` now forwards to `MDTuple::getTemporary()`,
which returns a tuple with `isTemporary()` equal to true.
The main point is that we can now add temporaries of other `MDNode`
subclasses, needed for PR22235 (I introduced `MDNodeFwdDecl` in the
first place because I didn't recognize this need, and thought they were
only needed to handle forward references).
A few things left out of (or highlighted by) this commit:
- I've had to remove the (few) uses of `std::unique_ptr<>` to deal
with temporaries, since the destructor is no longer public.
`getTemporary()` should probably return the equivalent of
`std::unique_ptr<T, MDNode::deleteTemporary>`.
- `MDLocation::getTemporary()` doesn't exist yet (worse, it actually
does exist, but does the wrong thing: `MDNode::getTemporary()` is
inherited and returns an `MDTuple`).
- `MDNode` now only has one subclass, `UniquableMDNode`, and the
distinction between them is actually somewhat confusing.
I'll fix those up next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226501 91177308-0d34-0410-b5e6-96231b3b80d8
Add an `LLVMContext &` to `ReplaceableMetadataImpl`, create a class that
either holds a reference to an `LLVMContext` or owns a
`ReplaceableMetadataImpl`, and use the new class in `MDNode`.
- This saves a pointer in `UniquableMDNode` at the cost of a pointer
in `ValueAsMetadata` (which didn't used to store the `LLVMContext`).
There are far more of the former.
- Unifies RAUW support between `MDNodeFwdDecl` (which is going away,
see r226481) and `UniquableMDNode`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226484 91177308-0d34-0410-b5e6-96231b3b80d8
Change `MDNode::isDistinct()` to only apply to 'distinct' nodes (not
temporaries), and introduce `MDNode::isUniqued()` and
`MDNode::isTemporary()` for the other two possibilities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226482 91177308-0d34-0410-b5e6-96231b3b80d8
a LoopInfoWrapperPass to wire the object up to the legacy pass manager.
This switches all the clients of LoopInfo over and paves the way to port
LoopInfo to the new pass manager. No functionality change is intended
with this iteration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226373 91177308-0d34-0410-b5e6-96231b3b80d8
Happened pretty commonly during `LLVMContext` teardown when `clang -g`
hit an error. This fixes the use-after-free. Next I'll clean up
teardown so that it's not RAUW'ing when metadata-tracked values are
deleted (only really causes a problem if the graph is mid-construction
when teardown starts, but it's still unnecessary work).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@226029 91177308-0d34-0410-b5e6-96231b3b80d8
utils/sort_includes.py.
I clearly haven't done this in a while, so more changed than usual. This
even uncovered a missing include from the InstrProf library that I've
added. No functionality changed here, just mechanical cleanup of the
include order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225974 91177308-0d34-0410-b5e6-96231b3b80d8
Add a new subclass of `UniquableMDNode`, `MDLocation`. This will be the
IR version of `DebugLoc` and `DILocation`. The goal is to rename this
to `DILocation` once the IR classes supersede the `DI`-prefixed
wrappers.
This isn't used anywhere yet. Part of PR21433.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225824 91177308-0d34-0410-b5e6-96231b3b80d8
This adds back the testcase from r225738, and adds to it. Looks like we
need both sides for now (the assertion was incorrect both ways, and
although it seemed reasonable (when written correctly) it wasn't
particularly important).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225745 91177308-0d34-0410-b5e6-96231b3b80d8
