should not be marked nounwind.
Marking them nounwind caused crashes in the WebKit FTL JIT, because if we enable
sufficient optimizations, LLVM starts eliding compact_unwind sections (or any unwind
data for that matter), making deoptimization via stackmaps impossible.
This changes the stackmap intrinsic to be may-throw, adds a test for exactly the
sympton that WebKit saw, and fixes TableGen to handle un-attributed intrinsics.
Thanks to atrick and philipreames for reviewing this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201826 91177308-0d34-0410-b5e6-96231b3b80d8
Modifying build_llvm to handle SDKROOT being the name of an SDK rather than a
path. This will still work if SDKROOT is a path.
rdar://problem/15162322
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201560 91177308-0d34-0410-b5e6-96231b3b80d8
Original commits messages:
Add MRMXr/MRMXm form to X86 for use by instructions which treat the 'reg' field of modrm byte as a don't care value. Will allow for simplification of disassembler code.
Simplify a bunch of code by removing the need for the x86 disassembler table builder to know about extended opcodes. The modrm forms are sufficient to convey the information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201065 91177308-0d34-0410-b5e6-96231b3b80d8
r201059 appears to cause a crash in a bootstrapped build of clang. Craig
isn't available to look at it right now, so I'm reverting it while he
investigates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201064 91177308-0d34-0410-b5e6-96231b3b80d8
Teach the Makefile build system to generate and install CMake modules
LLVMConfig.cmake and LLVMConfigVersion.cmake so that applications that
build with CMake can use 'find_package(LLVM)' even when LLVM is not
built with CMake. These modules tell such applications about available
LLVM libraries and their dependencies.
Run llvm-config to generate the list of libraries and use the results of
llvm-build to generate the library dependencies. Use sed to perform
substitutions in the LLVMConfig.cmake.in and LLVMConfigVersion.cmake.in
sources that our CMake build system uses.
Teach the Makefile build system to generate the LLVMExports.cmake file
with content similar to that produced by the CMake install(EXPORT)
command. Extend llvm-build with an option to generate the library
dependencies fragment for this file.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201053 91177308-0d34-0410-b5e6-96231b3b80d8
- Properly displaying non null terminated StringRef.
- Auto expanding pointer types.
- Displaying real type names for PointerUnions.
- Using "size" and "capacity" across all containers.
- Simplifying code where possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201004 91177308-0d34-0410-b5e6-96231b3b80d8
According to the AAPCS, when a CPRC is allocated to the stack, all other
VFP registers should be marked as unavailable.
I have also modified the rules for allocating non-CPRCs to the stack, to make
it more explicit that all GPRs must be made unavailable. I cannot think of a
case where the old version would produce incorrect answers, so there is no test
for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200970 91177308-0d34-0410-b5e6-96231b3b80d8
Modern compilers (Clang 3.4, GCC 4.8) warn on variadic macros being
introduced in C99, which produces a huge number of useless diagnostics
since this macro is unused in the whole project.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200479 91177308-0d34-0410-b5e6-96231b3b80d8
Sweep the codebase for common typos. Includes some changes to visible function
names that were misspelt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200018 91177308-0d34-0410-b5e6-96231b3b80d8
The addition of IC_OPSIZE_ADSIZE in r198759 wasn't quite complete. It
also turns out to have been unnecessary. The disassembler handles the
AdSize prefix for itself, and doesn't care about the difference between
(e.g.) MOV8ao8 and MOB8ao8_16 definitions. So just let them coexist and
don't worry about it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199654 91177308-0d34-0410-b5e6-96231b3b80d8
promotion code, Tablegen will now select FPExt for floating point promotions
(previously it had returned AExt, which is not valid for floating point types).
Any out-of-tree targets that were relying on AExt being returned for FP
promotions will need to update their code check for FPExt instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199252 91177308-0d34-0410-b5e6-96231b3b80d8
This should allow SSE instructions to be encoded correctly in 16-bit mode which r198586 probably broke.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199193 91177308-0d34-0410-b5e6-96231b3b80d8
This commit prospectively brings the benefits of r198766 to older supported
Python versions (2.5+).
Tested with Python 2.6, 2.7, 3.1 and 3.3 (!)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199009 91177308-0d34-0410-b5e6-96231b3b80d8
On the other hand, exec(compile()) doesn't work in older Python versions in the
2.x series.
This commit introduces exec(compile()) with a fallback to plain exec(). That'll
hopefully hit the sweet spot in terms of version support.
Followup to r198766 which added enhanced source locations for lit cfg parsing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199006 91177308-0d34-0410-b5e6-96231b3b80d8
To declare or define reserved identifers is undefined behaviour in standard
C++. This needs to be addressed in compiler-rt before it can be used in LLVM.
See the list discussion for details.
This reverts commit r198858.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198884 91177308-0d34-0410-b5e6-96231b3b80d8
Python doesn't do a good job at diagnosing string exec() so use execfile()
where available.
This should be a timesaver when trying to get to the bottom of build bot
failures.
Before:
File "llvm/utils/lit/lit/TestingConfig.py", line 93, in load_from_path
exec("exec data in cfg_globals")
File "<string>", line 1, in <module>
File "<string>", line 194, in <module>
NameError: name 'typo' is not defined
After:
File "llvm/utils/lit/lit/TestingConfig.py", line 95, in load_from_path
execfile(path, cfg_globals)
File "clang/test/lit.cfg", line 194, in <module>
typo
^~~~
NameError: name 'typo' is not defined
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198766 91177308-0d34-0410-b5e6-96231b3b80d8
It seems there is no separate instruction class for having AdSize *and*
OpSize bits set, which is required in order to disambiguate between all
these instructions. So add that to the disassembler.
Hm, perhaps we do need an AdSize16 bit after all?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198759 91177308-0d34-0410-b5e6-96231b3b80d8
A ValueType in a pattern dag is a type cast, and GetNumNodeResults should
handle it (the type cast has only one result).
This comes up, for example, during the type checking of pattern fragments, for
example, AArch64's Neon_combine_2d fragment is:
dag Operands = (ops node:$Rm, node:$Rn);
dag Fragment = (v2f64 (concat_vectors (v1f64 node:$Rm), (v1f64 node:$Rn)));
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198347 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the stat call error reporting for now.
It wasn't essential so silent fallback should be fine here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198155 91177308-0d34-0410-b5e6-96231b3b80d8
Add option -i to prioritize test runs by source file modification time and
previous failure state.
This optimal scheduling reduces typical test-and-fix iteration times to a
matter of seconds by rapidly answering the questions:
1) Did my recent change fix tests that were previously failing?
2) Do the tests I just wrote / modified still work?
The current implementation requires write permissions to the source tree
because it uses mtimes to track failures.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198150 91177308-0d34-0410-b5e6-96231b3b80d8
Since r197684, "install/bin/llvm-config --obj-root" hasn't shown the build tree. The builder was finding utils in the build tree, from the installed tree.
I will revert this after dragonegg builder would be tweaked not to use installed llvm-config.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197786 91177308-0d34-0410-b5e6-96231b3b80d8
That's what it actually means, and with 16-bit support it's going to be
a little more relevant since in a few corner cases we may actually want
to distinguish between 16-bit and 32-bit mode (for example the bare 'push'
aliases to pushw/pushl etc.)
Patch by David Woodhouse
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197768 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, the PowerPC instruction definitions make heavy use of the
positional operand encoding heuristic to map operands onto bitfield variables
in the instruction definitions. Changing this to use name-based mapping is not
trivial, however, because additional infrastructure needs to be designed to
handle mapping of complex operands (with multiple suboperands) onto multiple
bitfield variables.
In the mean time, this adds support for positionally encoded operands to
FixedLenDecoderEmitter, so that we can generate a disassembler for the PowerPC
backend. To prevent an accidental reliance on this feature, and to prevent an
undesirable interaction with existing disassemblers, a backend must opt-in to
this support by setting the new decodePositionallyEncodedOperands
instruction-set bit to true.
When enabled, this iterates the variables that contribute to the instruction
encoding, just as the encoder does, and emulates the procedure the encoder uses
to map "numbered" operands to variables. The bit range for each variable is
also determined as the encoder determines them. This map is then consulted
during the decoder-generator's loop over operands to decode, allowing the
decoder to understand both position-based and name-based operand-to-variable
mappings.
As noted in the comment on the decodePositionallyEncodedOperands definition,
this support should be removed once it is no longer needed. There should be no
change to existing disassemblers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197691 91177308-0d34-0410-b5e6-96231b3b80d8
This is more prep for adding the PowerPC disassembler. FixedLenDecoderEmitter
should recognize PointerLikeRegClass operands as register types, and generate
register-like decoding calls instead of treating them like immediates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197680 91177308-0d34-0410-b5e6-96231b3b80d8
The convention used to specify the PowerPC ISA is that bits are numbered in
reverse order (0 is the index of the high bit). To support this "little endian"
encoding convention, CodeEmitterGen will reverse the bit numberings prior to
generating the encoding tables. In order to generate a disassembler,
FixedLenDecoderEmitter needs to do the same.
This moves the bit reversal logic out of CodeEmitterGen and into CodeGenTarget
(where it can be used by both CodeEmitterGen and FixedLenDecoderEmitter). This
is prep work for disassembly support in the PPC backend (which is the only
in-tree user of this little-endian encoding support).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197532 91177308-0d34-0410-b5e6-96231b3b80d8
This missing parameter was causing bin/llvm-lit to run the unittests
from my primary build directory instead of my self-hosting build
directory because llvm-config was on my PATH.
This more closely matches what 'make check' will pass to lit.py.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197444 91177308-0d34-0410-b5e6-96231b3b80d8
Added scalar compare VCMPSS, VCMPSD.
Implemented LowerSELECT for scalar FP operations.
I replaced FSETCCss, FSETCCsd with one node type FSETCCs.
Node extract_vector_elt(v16i1/v8i1, idx) returns an element of type i1.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197384 91177308-0d34-0410-b5e6-96231b3b80d8
Both FileCheck and clang's -verify need to escape strings for regexes,
so let's expose this as a utility in the Regex class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197096 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tries to avoid unrelated changes other than fixing a few
hyphen-related ambiguities and contractions in nearby lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196471 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Directives are being ignored, when they occur between a partial-word false
match and any match on another prefix.
For example, with FOO and BAR prefixes:
_FOO
FOO: foo
BAR: bar
FileCheck incorrectly matches:
fog
bar
This happens because FOO falsely matched as a partial word at '_FOO' and was
ignored while BAR matched at 'BAR:'. The match of BAR is incorrectly returned
as the 'first match' causing the FOO directive to be discarded.
Fixed this the same way as r194565 (D2166) did for a similar test case.
The partial-word false match should be counted as a match for the purposes of
finding the first match of a prefix, but should be returned as a false match
using CheckTy::CheckNone so that it isn't treated as a directive.
Fixes PR17995
Reviewers: samsonov, arsenm
Reviewed By: samsonov
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2228
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195248 91177308-0d34-0410-b5e6-96231b3b80d8
The -triple option is used to create a named tarball of the release binaries.
Also disable the RPATH modifications on Mac OS X. It's not needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195193 91177308-0d34-0410-b5e6-96231b3b80d8
This patch places class definitions in implementation files into anonymous
namespaces to prevent weak vtables. This eliminates the need of providing an
out-of-line definition to pin the vtable explicitly to the file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195092 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file. The memory leaks in this version have been fixed. Thanks
Alexey for pointing them out.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195064 91177308-0d34-0410-b5e6-96231b3b80d8
libtool sets RPATH to "$ORIGIN/../lib:/the/directory/where/it/was/built/lib" so that a developper can use the built or the installed version seamlessly. Our binary packages should not have this developer friendly tweak, as the users of the binaries will not have the build tree.
Beside, in case the development tree is a possibly on an automounted share, this can create very bad user experience : they will incur an automount timeout penalty and will get a very bad feeling of llvm/clang's speed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194999 91177308-0d34-0410-b5e6-96231b3b80d8
This change is incorrect. If you delete virtual destructor of both a base class
and a subclass, then the following code:
Base *foo = new Child();
delete foo;
will not cause the destructor for members of Child class. As a result, I observe
plently of memory leaks. Notable examples I investigated are:
ObjectBuffer and ObjectBufferStream, AttributeImpl and StringSAttributeImpl.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194997 91177308-0d34-0410-b5e6-96231b3b80d8
externally to simplify our integration of GoogleTest into LLVM. Also,
build the single source file gtest-all.cc instead of the individual
source files as we don't expect these to change and thus gain nothing
from increased incrementality in compiles.
This makes our standard build of googletest exactly like upstream's
recommended build and the sanitizer's build. It also simplifies the
steps of importing a new version should we ever want one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194801 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fix a case when "FileCheck --check-prefix=CHECK --check-prefix=CHECKER"
would silently ignore check-lines of the form:
CHECKER: foo
Reviewers: dsanders
Reviewed By: dsanders
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2168
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194577 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fixes a subtle bug in new FileCheck feature added
in r194343. When we search for the first satisfying check-prefix,
we should actually return the first encounter of some check-prefix as a
substring, even if it's not a part of valid check-line. Otherwise
"FileCheck --check-prefix=FOO --check-prefix=BAR" with check file:
FOO not a vaild check-line
FOO: foo
BAR: bar
incorrectly accepted file:
fog
bar
as it skipped the first two encounters of FOO, matching only BAR: line.
Reviewers: arsenm, dsanders
Reviewed By: dsanders
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2166
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194565 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful if you want to run multiple variations
of a single test, and the majority of check lines
should be the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194343 91177308-0d34-0410-b5e6-96231b3b80d8
linkonce_odr_auto_hide was in incomplete attempt to implement a way
for the linker to hide symbols that are known to be available in every
TU and whose addresses are not relevant for a particular DSO.
It was redundant in that it all its uses are equivalent to
linkonce_odr+unnamed_addr. Unlike those, it has never been connected
to clang or llvm's optimizers, so it was effectively dead.
Given that nothing produces it, this patch just nukes it
(other than the llvm-c enum value).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193865 91177308-0d34-0410-b5e6-96231b3b80d8
These used to be referenced by the CGI->AWI map (in AsmWriterEmitter), but
stored in a vector local to EmitPrintInstruction. Move the vector to
AsmWriterEmitter too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193525 91177308-0d34-0410-b5e6-96231b3b80d8
