Similar to my previous -exports-trie option, the -rebase option dumps info from
the LC_DYLD_INFO load command. The rebasing info is a list of the the locations
that dyld needs to adjust if a mach-o image is not loaded at its preferred
address. Since ASLR is now the default, images almost never load at their
preferred address, and thus need to be rebased by dyld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217709 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a call to sys::fs::equivalent that should've been to
CodeCoverageTool::equivalentFiles, which lets us restore the test of
r217476 that was removed in r217478.
This reverts r217478, but the test works this time.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217646 91177308-0d34-0410-b5e6-96231b3b80d8
With this a DataLayoutPass can be reused for multiple modules.
Once we have doInitialization/doFinalization, it doesn't seem necessary to pass
a Module to the constructor.
Overall this change seems in line with the idea of making DataLayout a required
part of Module. With it the only way of having a DataLayout used is to add it
to the Module.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217548 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for reading the "bigobj" variant of COFF produced by
cl's /bigobj and mingw's -mbig-obj.
The most significant difference that bigobj brings is more than 2**16
sections to COFF.
bigobj brings a few interesting differences with it:
- It doesn't have a Characteristics field in the file header.
- It doesn't have a SizeOfOptionalHeader field in the file header (it's
only used in executable files).
- Auxiliary symbol records have the same width as a symbol table entry.
Since symbol table entries are bigger, so are auxiliary symbol
records.
Write support will come soon.
Differential Revision: http://reviews.llvm.org/D5259
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217496 91177308-0d34-0410-b5e6-96231b3b80d8
This is the plugin version of pr20882.
This handles the case of every common symbol being in the IR. We will need some
support from gold to handle the case where some symbols are in ELF and some in
the IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217458 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-cov had a SourceRange type that was nearly identical to a
CountedRegion except that it shaved off a couple of fields. There
aren't likely to be enough of these for the minor memory savings to be
worth the extra complexity here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217417 91177308-0d34-0410-b5e6-96231b3b80d8
This name was too similar to CoverageMappingRegion, and the type
really belongs in the coverage library anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217416 91177308-0d34-0410-b5e6-96231b3b80d8
FunctionCoverageMapping::PrettyName was from a version of the tool
during review, and isn't actually used currently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217398 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the printing of more load commands, so that the normal load commands
in a typical X86 Mach-O executable can all be printed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217172 91177308-0d34-0410-b5e6-96231b3b80d8
sections.
This allows fine-grained control of the memory layout of hypothetical target
processes for testing purposes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217122 91177308-0d34-0410-b5e6-96231b3b80d8
The basic idea is similar to the existing cross compilation support. A directory must be configured to build host versions of tablegen tools and llvm-config. This directory can be user provided (and configured), or it can be created during the build. During a build the native build directory will be configured and built to supply the tablegen tools used during the build. A user could also explicitly provide the tablegen executables to run on the CMake command line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217105 91177308-0d34-0410-b5e6-96231b3b80d8
I took a guess at the changes to the gold plugin, because that doesn't
seem to build by default for me. Not sure what dependencies I might be
missing for that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217056 91177308-0d34-0410-b5e6-96231b3b80d8
This forces callers to use std::move when calling it. It is somewhat odd to have
code with std::move that doesn't always move, but it is also odd to have code
without std::move that sometimes moves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217049 91177308-0d34-0410-b5e6-96231b3b80d8
This CL replaces the constant DarwinX86AsmBackend.PushInstrSize with a method
that lets the backend account for different sizes of "push %reg" instruction
sizes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217020 91177308-0d34-0410-b5e6-96231b3b80d8
The code is buggy and barely tested. It is also mostly boilerplate.
(This includes MCObjectDisassembler, which is the interface to that
functionality)
Following an IRC discussion with Jim Grosbach, it seems sensible to just
nuke the whole lot of functionality, and dig it up from VCS if
necessary (I hope not!).
All of this stuff appears to have been added in a huge patch dump (look
at the timeframe surrounding e.g. r182628) where almost every patch
seemed to be untested and not reviewed before being committed.
Post-review responses to the patches were never addressed. I don't think
any of it would have passed pre-commit review.
I doubt anyone is depending on this, since this code appears to be
extremely buggy. In limited testing that Michael Spencer and I did, we
couldn't find a single real-world object file that wouldn't crash the
CFG reconstruction stuff. The symbolizer stuff has O(n^2) behavior and
so is not much use to anyone anyway. It seemed simpler to remove them as
a whole. Most of this code is boilerplate, which is the only way it was
able to scrape by 60% coverage.
HEADSUP: Modules folks, some files I nuked were referenced from
include/llvm/module.modulemap; I just deleted the references. Hopefully
that is the right fix (one was a FIXME though!).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216983 91177308-0d34-0410-b5e6-96231b3b80d8
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reinstates commits r215111, 215115, 215116, 215117, 215136.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216982 91177308-0d34-0410-b5e6-96231b3b80d8
This allows streams that only use BLOCKINFO for debugging purposes to omit
the block entirely. As long as another stream is available with the correct
BLOCKINFO, the first stream can still be analyzed and dumped.
As part of this commit, BitstreamReader gets a move constructor and move
assignment operator, as well as a takeBlockInfo method.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216826 91177308-0d34-0410-b5e6-96231b3b80d8
MachOObjectFile in lib/Object currently has no support for parsing the rebase,
binding, and export information from the LC_DYLD_INFO load command in final
linked mach-o images. This patch adds support for parsing the exports trie data
structure. It also adds an option to llvm-objdump to dump that export info.
I did the exports parsing first because it is the hardest. The information is
encoded in a trie structure, but the standard ObjectFile way to inspect content
is through iterators. So I needed to make an iterator that would do a
non-recursive walk through the trie and maintain the concatenation of edges
needed for the current string prefix.
I plan to add similar support in MachOObjectFile and llvm-objdump to
parse/display the rebasing and binding info too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216808 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the printing of the LC_SEGMENT load command and sections,
LC_SYMTAB and LC_DYSYMTAB load commands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216795 91177308-0d34-0410-b5e6-96231b3b80d8
By taking a reference we can do the ownership transfer in one place instead of
expecting every caller to do it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216492 91177308-0d34-0410-b5e6-96231b3b80d8
The attached patch simplifies a few interfaces that don't need to take
ownership of a buffer.
For example, both parseAssembly and parseBitcodeFile will parse the
entire buffer before returning. There is no need to take ownership.
Using a MemoryBufferRef makes it obvious in the type signature that
there is no ownership transfer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216488 91177308-0d34-0410-b5e6-96231b3b80d8
Long term the idea if for the engine to not own the buffers, but for now
this is consistent with the rest of the API.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216484 91177308-0d34-0410-b5e6-96231b3b80d8
The memory management in BugPoint is fairly convoluted, so this just unwraps
one layer by changing the return type of functions that always return
owned Modules.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216464 91177308-0d34-0410-b5e6-96231b3b80d8
Take a StringRef instead of a "const char *".
Take a "std::error_code &" instead of a "std::string &" for error.
A create static method would be even better, but this patch is already a bit too
big.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216393 91177308-0d34-0410-b5e6-96231b3b80d8
