Sometimes a LLVM compilation may take more time then a client would like to
wait for. The problem is that it is not possible to safely suspend the LLVM
thread from the outside. When the timing is bad it might be possible that the
LLVM thread holds a global mutex and this would block any progress in any other
thread.
This commit adds a new yield callback function that can be registered with a
context. LLVM will try to yield by calling this callback function, but there is
no guaranteed frequency. LLVM will only do so if it can guarantee that
suspending the thread won't block any forward progress in other LLVM contexts
in the same process.
Once the client receives the call back it can suspend the thread safely and
resume it at another time.
Related to <rdar://problem/16728690>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208945 91177308-0d34-0410-b5e6-96231b3b80d8
We already had an assert for foo->RAUW(foo), but not for something like
foo->RAUW(GEP(foo)) and would go in an infinite loop trying to apply
the replacement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208663 91177308-0d34-0410-b5e6-96231b3b80d8
Split from the musttail inliner change. This will be covered by an opt
test when the inliner change lands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208126 91177308-0d34-0410-b5e6-96231b3b80d8
operations on the call graph. This one forms a cycle, and while not as
complex as removing an internal edge from an SCC, it involves
a reasonable amount of work to find all of the nodes newly connected in
a cycle.
Also somewhat alarming is the worst case complexity here: it might have
to walk roughly the entire SCC inverse DAG to insert a single edge. This
is carefully documented in the API (I hope).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207935 91177308-0d34-0410-b5e6-96231b3b80d8
This fix simply ensures that both metadata nodes are path-aware before
performing path-aware alias analysis.
This issue isn't normally triggered in LLVM, because we perform an autoupgrade
of the TBAA metadata to the new format when reading in LL or BC files. This
issue only appears when a client creates the IR manually and mixes old and new
TBAA metadata format.
This fixes <rdar://problem/16760860>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207923 91177308-0d34-0410-b5e6-96231b3b80d8
just connects an SCC to one of its descendants directly. Not much of an
impact. The last one is the hard one -- connecting an SCC to one of its
ancestors, and thereby forming a cycle such that we have to merge all
the SCCs participating in the cycle.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207751 91177308-0d34-0410-b5e6-96231b3b80d8
of SCCs in the SCC DAG. Exercise them in the big graph test case. These
will be especially useful for establishing invariants in insertion
logic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207749 91177308-0d34-0410-b5e6-96231b3b80d8
We already do this for shstrtab, so might as well do it for strtab. This
extracts the string table building code into a separate class. The idea
is to use it for other object formats too.
I mostly wanted to do this for the general principle, but it does save a
little bit on object file size. I tried this on a clang bootstrap and
saved 0.54% on the sum of object file sizes (1.14 MB out of 212 MB for
a release build).
Differential Revision: http://reviews.llvm.org/D3533
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207670 91177308-0d34-0410-b5e6-96231b3b80d8
When we were moving from a larger vector to a smaller one but didn't
need to re-allocate, we would move-assign over uninitialized memory in
the target, then move-construct that same data again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207663 91177308-0d34-0410-b5e6-96231b3b80d8
edge entirely within an existing SCC. Shockingly, making the connected
component more connected is ... a total snooze fest. =]
Anyways, its wired up, and I even added a test case to make sure it
pretty much sorta works. =D
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207631 91177308-0d34-0410-b5e6-96231b3b80d8
bits), and discover that it's totally broken. Yay tests. Boo bug. Fix
the basic edge removal so that it works by nulling out the removed edges
rather than actually removing them. This leaves the indices valid in the
map from callee to index, and preserves some of the locality for
iterating over edges. The iterator is made bidirectional to reflect that
it now has to skip over null entries, and the skipping logic is layered
onto it.
As future work, I would like to track essentially the "load factor" of
the edge list, and when it falls below a threshold do a compaction.
An alternative I considered (and continue to consider) is storing the
callees in a doubly linked list where each element of the list is in
a set (which is essentially the classical linked-hash-table
datastructure). The problem with that approach is that either you need
to heap allocate the linked list nodes and use pointers to them, or use
a bucket hash table (with even *more* linked list pointer overhead!),
etc. It's pretty easy to get 5x overhead for values that are just
pointers. So far, I think punching holes in the vector, and periodic
compaction is likely to be much more efficient overall in the space/time
tradeoff.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207619 91177308-0d34-0410-b5e6-96231b3b80d8
Move a detailed test of `BranchProbability::scale()` from
`BlockFrequencyTest` over to `BranchProbabilityTest`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207552 91177308-0d34-0410-b5e6-96231b3b80d8
Change `BlockFrequency` to defer to `BranchProbability::scale()` and
`BranchProbability::scaleByInverse()`.
This removes `BlockFrequency::scale()` from its API (and drops the
ability to see the remainder), but the only user was the unit tests. If
some code in the future needs an API that exposes the remainder, we can
add something to `BranchProbability`, but I find that unlikely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207550 91177308-0d34-0410-b5e6-96231b3b80d8
Add API to `BranchProbability` for scaling big integers. Next job is to
rip the logic out of `BlockMass` and `BlockFrequency`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207544 91177308-0d34-0410-b5e6-96231b3b80d8
never actually compared for equality two pointer unions that were equal.
Fortunately, things seem to work. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207468 91177308-0d34-0410-b5e6-96231b3b80d8
This commit provides the necessary C/C++ APIs and infastructure to enable fine-
grain progress report and safe suspension points after each pass in the pass
manager.
Clients can provide a callback function to the pass manager to call after each
pass. This can be used in a variety of ways (progress report, dumping of IR
between passes, safe suspension of threads, etc).
The run listener list is maintained in the LLVMContext, which allows a multi-
threaded client to be only informed for it's own thread. This of course assumes
that the client created a LLVMContext for each thread.
This fixes <rdar://problem/16728690>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207430 91177308-0d34-0410-b5e6-96231b3b80d8
contract (and be much more useful). It now provides exactly the
post-order traversal a caller might need to perform on newly formed
SCCs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207410 91177308-0d34-0410-b5e6-96231b3b80d8
API requirements much more obvious.
The key here is that there are two totally different use cases for
mutating the graph. Prior to doing any SCC formation, it is very easy to
mutate the graph. There may be users that want to do small tweaks here,
and then use the already-built graph for their SCC-based operations.
This method remains on the graph itself and is documented carefully as
being cheap but unavailable once SCCs are formed.
Once SCCs are formed, and there is some in-flight DFS building them, we
have to be much more careful in how we mutate the graph. These mutation
operations are sunk onto the SCCs themselves, which both simplifies
things (the code was already there!) and helps make it obvious that
these interfaces are only applicable within that context. The other
primary constraint is that the edge being mutated is actually related to
the SCC on which we call the method. This helps make it obvious that you
cannot arbitrarily mutate some other SCC.
I've tried to write much more complete documentation for the interesting
mutation API -- intra-SCC edge removal. Currently one aspect of this
documentation is a lie (the result list of SCCs) but we also don't even
have tests for that API. =[ I'm going to add tests and fix it to match
the documentation next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207339 91177308-0d34-0410-b5e6-96231b3b80d8
This should reduce the chance of memory leaks like those fixed in
r207240.
There's still some unclear ownership of DIEs happening in DwarfDebug.
Pushing unique_ptr and references through more APIs should help expose
the cases where ownership is a bit fuzzy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207263 91177308-0d34-0410-b5e6-96231b3b80d8
Makes some more cases (the unit tests, specifically), lexically
compatible with a change to unique_ptr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207261 91177308-0d34-0410-b5e6-96231b3b80d8
It's fishy to be changing the `std::vector<>` owned by the iterator, and
no one actual does it, so I'm going to remove the ability in a
subsequent commit. First, update the users.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207252 91177308-0d34-0410-b5e6-96231b3b80d8
an issue. This way you see that the number of nodes was wrong before
a crash due to accessing too many nodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207094 91177308-0d34-0410-b5e6-96231b3b80d8
Boost's iterator_adaptor, and a specific adaptor which iterates over
pointees when wrapped around an iterator over pointers.
This is the result of a long discussion on IRC with Duncan Smith, Dave
Blaikie, Richard Smith, and myself. Essentially, I could use some subset
of the iterator facade facilities often used from Boost, and everyone
seemed interested in having the functionality in a reasonably generic
form. I've tried to strike a balance between the pragmatism and the
established Boost design. The primary differences are:
1) Delegating to the standard iterator interface names rather than
special names that then make up a second iterator-like API.
2) Using the name 'pointee_iterator' which seems more clear than
'indirect_iterator'. The whole business of calling the '*p' operation
'pointer indirection' in the standard is ... quite confusing. And
'dereference' is no better of a term for moving from a pointer to
a reference.
Hoping Duncan, and others continue to provide comments on this until
we've got a nice, minimal abstraction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207069 91177308-0d34-0410-b5e6-96231b3b80d8
than functions. So far, this access pattern is *much* more common. It
seems likely that any user of this interface is going to have nodes at
the point that they are querying the SCCs.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207045 91177308-0d34-0410-b5e6-96231b3b80d8
