Emission for globals, using the correct data sections
Function alignment can be computed for each target using TargetELFWriterInfo
Some small fixes
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73201 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the IndexedModeAction representation to remove the
limitation on the number of value types in MVT. This limitation
prevents us from specifying AVX types.
Prior to this change IndexedModActions was represented as follows...
uint64_t IndexedModeActions[2][ISD::LAST_INDEXED_MODE];
the first dimension was used to represent loads, then stores. This
imposed a limitation of 32 on the number of value types that could be
handled with this method. The value type was used to shift the two bits
into and out of the approprate bits in the uint64_t.
With this change the array is now represented as ...
uint8_t IndexedModeActions[MVT::LAST_VALUETYPE][2][ISD::LAST_INDEXED_MODE];
Takes more space but removes the limitation on MVT::LAST_VALUETYPE. The
first dimension is now the value_type for the reference. The second
dimension is the load [0] vs. store[1]. The third dimension represents
the various modes for load store. Accesses are now direct, no shifting
or masking.
There are other limitations that need to be removed, so that
MVT::LAST_VALUETYPE can be greater than 32. This is merely the first
step towards that goal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73104 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the IndexedModeAction representation to remove the
limitation on the number of value types in MVT. This limitation
prevents us from specifying AVX types.
Prior to this change IndexedModActions was represented as follows...
uint64_t IndexedModeActions[2][ISD::LAST_INDEXED_MODE];
the first dimension was used to represent loads, then stores. This
imposed a limitation of 32 on the number of value types that could be
handled with this method. The value type was used to shift the two bits
into and out of the approprate bits in the uint64_t.
With this change the array is now represented as ...
uint8_t IndexedModeActions[MVT::LAST_VALUETYPE][2][ISD::LAST_INDEXED_MODE];
Takes more space but removes the limitation on MVT::LAST_VALUETYPE. The
first dimension is now the value_type for the reference. The second
dimension is the load [0] vs. store[1]. The third dimension represents
the various modes for load store. Accesses are now direct, no shifting
or masking.
There are other limitations that need to be removed, so that
MVT::LAST_VALUETYPE can be greater than 32. This is merely the first
step towards that goal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73102 91177308-0d34-0410-b5e6-96231b3b80d8
ABI. The missing piece is support for putting "homogeneous aggregates"
into registers.
Patch by Sandeep Patel!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73095 91177308-0d34-0410-b5e6-96231b3b80d8
other operators. For the rare cases where a list type cannot be
deduced, provide a []<type> syntax, where <type> is the list element
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73078 91177308-0d34-0410-b5e6-96231b3b80d8
Also create isValidElementType for ArrayType, PointerType, StructType and
VectorType.
Make LLParser use them. This closes up some holes like an assertion failure on:
%x = type {label}
but largely doesn't change any semantics. The only thing we accept now which
we didn't before is vectors of opaque type such as "<4 x opaque>". The opaque
can be resolved to an int or float when linking.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73016 91177308-0d34-0410-b5e6-96231b3b80d8
Update code generator to use this attribute and remove NoImplicitFloat target option.
Update llc to set this attribute when -no-implicit-float command line option is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72959 91177308-0d34-0410-b5e6-96231b3b80d8
build vectors with i64 elements will only appear on 32b x86 before legalize.
Since vector widening occurs during legalize, and produces i64 build_vector
elements, the dag combiner is never run on these before legalize splits them
into 32b elements.
Teach the build_vector dag combine in x86 back end to recognize consecutive
loads producing the low part of the vector.
Convert the two uses of TLI's consecutive load recognizer to pass LoadSDNodes
since that was required implicitly.
Add a testcase for the transform.
Old:
subl $28, %esp
movl 32(%esp), %eax
movl 4(%eax), %ecx
movl %ecx, 4(%esp)
movl (%eax), %eax
movl %eax, (%esp)
movaps (%esp), %xmm0
pmovzxwd %xmm0, %xmm0
movl 36(%esp), %eax
movaps %xmm0, (%eax)
addl $28, %esp
ret
New:
movl 4(%esp), %eax
pmovzxwd (%eax), %xmm0
movl 8(%esp), %eax
movaps %xmm0, (%eax)
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72957 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
Update code generator to use this attribute and remove DisableRedZone target option.
Update llc to set this attribute when -disable-red-zone command line option is used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72894 91177308-0d34-0410-b5e6-96231b3b80d8
TargetData pointer. The only thing it's used for are
calls to ConstantFoldCompareInstOperands and
ConstantFoldInstOperands, which both already accept a
null TargetData pointer. This makes
ConstantFoldConstantExpression easier to use in clients
where TargetData is optional.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72741 91177308-0d34-0410-b5e6-96231b3b80d8
ADDC/ADDE use MVT::i1 (later, whatever it gets legalized to)
instead of MVT::Flag. Remove CARRY_FALSE in favor of 0; adjust
all target-independent code to use this format.
Most targets will still produce a Flag-setting target-dependent
version when selection is done. X86 is converted to use i32
instead, which means TableGen needs to produce different code
in xxxGenDAGISel.inc. This keys off the new supportsHasI1 bit
in xxxInstrInfo, currently set only for X86; in principle this
is temporary and should go away when all other targets have
been converted. All relevant X86 instruction patterns are
modified to represent setting and using EFLAGS explicitly. The
same can be done on other targets.
The immediate behavior change is that an ADC/ADD pair are no
longer tightly coupled in the X86 scheduler; they can be
separated by instructions that don't clobber the flags (MOV).
I will soon add some peephole optimizations based on using
other instructions that set the flags to feed into ADC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72707 91177308-0d34-0410-b5e6-96231b3b80d8
