Commit Graph

312 Commits

Author SHA1 Message Date
Renato Golin
07d9471bc5 Add #pragma vectorize enable/disable to LLVM
The intended behaviour is to force vectorization on the presence
of the flag (either turn on or off), and to continue the behaviour
as expected in its absence. Tests were added to make sure the all
cases are covered in opt. No tests were added in other tools with
the assumption that they should use the PassManagerBuilder in the
same way.

This patch also removes the outdated -late-vectorize flag, which was
on by default and not helping much.

The pragma metadata is being attached to the same place as other loop
metadata, but nothing forbids one from attaching it to a function
(to enable #pragma optimize) or basic blocks (to hint the basic-block
vectorizers), etc. The logic should be the same all around.

Patches to Clang to produce the metadata will be produced after the
initial implementation is agreed upon and committed. Patches to other
vectorizers (such as SLP and BB) will be added once we're happy with
the pass manager changes.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196537 91177308-0d34-0410-b5e6-96231b3b80d8
2013-12-05 21:20:02 +00:00
Arnold Schwaighofer
df9c9da884 opt: Mirror vectorization presets of clang
clang enables vectorization at optimization levels > 1 and size level < 2. opt
should behave similarily.

Loop vectorization and SLP vectorization can be disabled with the flags
-disable-(loop/slp)-vectorization.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196294 91177308-0d34-0410-b5e6-96231b3b80d8
2013-12-03 16:33:06 +00:00
Manman Ren
b8e48a636e Debug Info: In DIBuilder, the context field of subprogram is updated to use
DIScopeRef.

A paired commit at clang is required due to changes to DIBuilder.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192378 91177308-0d34-0410-b5e6-96231b3b80d8
2013-10-10 18:40:01 +00:00
Greg Bedwell
0568ba6e3a Test commit. Remove whitespace from otherwise empty lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192284 91177308-0d34-0410-b5e6-96231b3b80d8
2013-10-09 08:55:27 +00:00
Craig Topper
4acd20a20b Lift alignment restrictions for load/store folding on VINSERTF128/VEXTRACTF128. Fixes PR17268.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190916 91177308-0d34-0410-b5e6-96231b3b80d8
2013-09-18 03:55:53 +00:00
Manman Ren
2c9905a1f3 Debug Info: Use DIScopeRef for DIType::getContext.
In DIBuilder, the context field of a TAG_member is updated to use the
scope reference. Verifier is updated accordingly.
    
DebugInfoFinder now needs to generate a type identifier map to have
access to the actual scope. Same applies for BreakpointPrinter.
    
processModule of DebugInfoFinder is called during initialization phase
of the verifier to make sure the type identifier map is constructed early
enough.
    
We are now able to unique a simple class as demonstrated by the added
testing case.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190334 91177308-0d34-0410-b5e6-96231b3b80d8
2013-09-09 19:47:11 +00:00
Hal Finkel
435798e96a Disable unrolling in the loop vectorizer when disabled in the pass manager
When unrolling is disabled in the pass manager, the loop vectorizer should also
not unroll loops. This will allow the -fno-unroll-loops option in Clang to
behave as expected (even for vectorizable loops). The loop vectorizer's
-force-vector-unroll option will (continue to) override the pass-manager
setting (including -force-vector-unroll=0 to force use of the internal
auto-selection logic).

In order to test this, I added a flag to opt (-disable-loop-unrolling) to force
disable unrolling through opt (the analog of -fno-unroll-loops in Clang). Also,
this fixes a small bug in opt where the loop vectorizer was enabled only after
the pass manager populated the queue of passes (the global_alias.ll test needed
a slight update to the RUN line as a result of this fix).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189499 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-28 18:33:10 +00:00
Arnold Schwaighofer
b6171c5296 Remove logic that decides whether to vectorize or not depending on O-levels
I have moved this logic into clang and opt.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188281 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-13 15:51:25 +00:00
Bill Wendling
61fc8d670f Use function attributes to indicate that we don't want to realign the stack.
Function attributes are the future! So just query whether we want to realign the
stack directly from the function instead of through a random target options
structure.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187618 91177308-0d34-0410-b5e6-96231b3b80d8
2013-08-01 21:42:05 +00:00
Tom Stellard
57e6b2d1f3 SimplifyCFG: Use parallel-and and parallel-or mode to consolidate branch conditions
Merge consecutive if-regions if they contain identical statements.
Both transformations reduce number of branches.  The transformation
is guarded by a target-hook, and is currently enabled only for +R600,
but the correctness has been tested on X86 target using a variety of
CPU benchmarks.

Patch by: Mei Ye

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187278 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-27 00:01:07 +00:00
Bill Wendling
f245ae5a4a Replace the "NoFramePointerElimNonLeaf" target option with a function attribute.
There's no need to specify a flag to omit frame pointer elimination on non-leaf
nodes...(Honestly, I can't parse that option out.) Use the function attribute
stuff instead.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187093 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-25 00:34:29 +00:00
Bill Wendling
0dcba2fadb Recommit r186217 with testcase fix:
Use the function attributes to pass along the stack protector buffer size.

 Now that we have robust function attributes, don't use a command line option to
 specify the stack protecto buffer size.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186863 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-22 20:15:21 +00:00
Rafael Espindola
c1b49b56d4 Add a wrapper for open.
This centralizes the handling of O_BINARY and opens the way for hiding more
differences (like how open behaves with directories).

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186447 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-16 19:44:17 +00:00
Chandler Carruth
12c74dc2c2 Revert commit r186217 -- this is breaking bots:
http://lab.llvm.org:8013/builders/clang-x86_64-darwin11-nobootstrap-RAincremental/builds/4328

Original commit log:
  Use the function attributes to pass along the stack protector buffer
  size.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186234 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-13 01:00:17 +00:00
Bill Wendling
8a50013cc2 Use the function attributes to pass along the stack protector buffer size.
Now that we have robust function attributes, don't use a command line option to
specify the stack protecto buffer size.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186217 91177308-0d34-0410-b5e6-96231b3b80d8
2013-07-12 22:25:20 +00:00
Manman Ren
cbafae6d33 Debug Info: clean up usage of Verify.
No functionality change.
It should suffice to check the type of a debug info metadata, instead of
calling Verify. For cases where we know the type of a DI metadata, use
assert.

Also update testing cases to make them conform to the format of DI classes.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185135 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-28 05:43:10 +00:00
Eric Christopher
8479989ebe Revert "Debug Info: clean up usage of Verify." as it's breaking bots.
This reverts commit r185020

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185032 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-26 22:44:57 +00:00
Manman Ren
02e75021d8 Debug Info: clean up usage of Verify.
No functionality change.
It should suffice to check the type of a debug info metadata, instead of
calling Verify.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@185020 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-26 21:26:10 +00:00
Meador Inge
be87bce32b Remove the simplify-libcalls pass (finally)
This commit completely removes what is left of the simplify-libcalls
pass.  All of the functionality has now been migrated to the instcombine
and functionattrs passes.  The following C API functions are now NOPs:

  1. LLVMAddSimplifyLibCallsPass
  2. LLVMPassManagerBuilderSetDisableSimplifyLibCalls

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184459 91177308-0d34-0410-b5e6-96231b3b80d8
2013-06-20 19:48:07 +00:00
Daniel Malea
13ace6664f Add DebugIR pass -- emits IR file and replace source lines with IR lines in MD
- requires existing debug information to be present
- fixes up file name and line number information in metadata
- emits a "<orig_filename>-debug.ll" succinct IR file (without !dbg metadata
  or debug intrinsics) that can be read by a debugger
- initialize pass in opt tool to enable the "-debug-ir" flag
- lit tests to follow



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181467 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-08 20:44:14 +00:00
Eric Christopher
60d20a81fc Revert "Recommit r179497 after fixing uninitialized variable." until
I can fix the testcases here:

http://lab.llvm.org:8011/builders/clang-native-arm-cortex-a9/builds/6952

This reverts commit r179512 due to testcases specifying triples
that they didn't actually mean and causing failures on other platforms.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179513 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-15 07:31:37 +00:00
Eric Christopher
fdf9624f3c Recommit r179497 after fixing uninitialized variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179512 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-15 07:07:21 +00:00
Eric Christopher
f1216abf7e Revert "Remove some unused triple and data layout."
This reverts commit r179497 and the accompanying commit as it broke random platforms that aren't osx.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179499 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-14 23:35:36 +00:00
Eric Christopher
10f8d2bb5b If we've specified a triple on the command line then go ahead
and use that as the default triple for the module and target
data layout.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179497 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-14 23:32:40 +00:00
Andy Gibbs
200241e4de Replace uses of the deprecated std::auto_ptr with OwningPtr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179373 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-12 10:56:28 +00:00
Chandler Carruth
7fc162f893 Split out the IRReader header and the utility functions it provides into
its own library. These functions are bridging between the bitcode reader
and the ll parser which are in different libraries. Previously we didn't
have any good library to do this, and instead played fast and loose with
a "header only" set of interfaces in the Support library. This really
doesn't work well as evidenced by the recent attempt to add timing logic
to the these routines.

As part of this, make them normal functions rather than weird inline
functions, and sink the implementation into the library. Also clean up
the header to be nice and minimal.

This requires updating lots of build system dependencies to specify that
the IRReader library is needed, and several source files to not
implicitly rely upon the header file to transitively include all manner
of other headers.

If you are using IRReader.h, this commit will break you (the header
moved) and you'll need to also update your library usage to include
'irreader'. I will commit the corresponding change to Clang momentarily.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177971 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-26 02:25:37 +00:00
Michael Gottesman
24c4898973 Extracted ObjCARC.cpp into its own library libLLVMObjCARCOpts in preparation for refactoring the ARC Optimizer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173647 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-28 01:35:51 +00:00
Chandler Carruth
90230c8466 Sort all of the includes. Several files got checked in with mis-sorted
includes.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172891 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-19 08:03:47 +00:00
Jakub Staszak
446991dc34 Fix #includes after my last commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172114 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-10 21:56:40 +00:00
Chandler Carruth
3251e81d79 Move CallGraphSCCPass.h into the Analysis tree; that's where the
implementation lives already.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171746 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-07 15:26:48 +00:00
Chandler Carruth
aeef83c6af Switch TargetTransformInfo from an immutable analysis pass that requires
a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.

The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.

The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.

The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.

The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.

The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.

The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.

The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.

Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.

Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.

Commits to update DragonEgg and Clang will be made presently.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171681 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-07 01:37:14 +00:00
Chandler Carruth
7bdf6b00e0 Convert the TargetTransformInfo from an immutable pass with dynamic
interfaces which could be extracted from it, and must be provided on
construction, to a chained analysis group.

The end goal here is that TTI works much like AA -- there is a baseline
"no-op" and target independent pass which is in the group, and each
target can expose a target-specific pass in the group. These passes will
naturally chain allowing each target-specific pass to delegate to the
generic pass as needed.

In particular, this will allow a much simpler interface for passes that
would like to use TTI -- they can have a hard dependency on TTI and it
will just be satisfied by the stub implementation when that is all that
is available.

This patch is a WIP however. In particular, the "stub" pass is actually
the one and only pass, and everything there is implemented by delegating
to the target-provided interfaces. As a consequence the tools still have
to explicitly construct the pass. Switching targets to provide custom
passes and sinking the stub behavior into the NoTTI pass is the next
step.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171621 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-05 11:43:11 +00:00
Chandler Carruth
0b8c9a80f2 Move all of the header files which are involved in modelling the LLVM IR
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.

There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.

The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.

I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).

I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-02 11:36:10 +00:00
Chandler Carruth
7f00f87767 Sort a few more #include lines in tools/... unittests/... and utils/...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171363 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-02 10:26:28 +00:00
Nadav Rotem
b338d897f9 Make opt grab the triple from the module and use it to initialize the target machine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171341 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-01 08:00:32 +00:00
NAKAMURA Takumi
f2a68db426 llvm/tools: Add #include "llvm/TargetTransformInfo.h"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169817 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-11 05:53:37 +00:00
Chandler Carruth
f010c464a1 Sort the #include lines for tools/...
Again, tools are trickier to pick the main module header for than
library source files. I've started to follow the pattern of using
LLVMContext.h when it is included as a stub for program source files.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169252 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-04 10:44:52 +00:00
Pedro Artigas
6eda081345 One more step towards making doInitialization and doFinalization useful for
start up and clean up module passes, now that ASAN and TSAN are fixed the
tests pass



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168905 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 17:47:05 +00:00
Owen Anderson
9780d352b9 Revert r168635 "Step towards implementation of pass manager with doInitialization and doFinalization per module detangled from runOn?? calls, still has temporary code not to break ASAN to be removed when that pass conforms to the proposed model".
It appears to have broken at least one buildbot.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168654 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-27 00:53:24 +00:00
Owen Anderson
0d30d30d58 Step towards implementation of pass manager with doInitialization and doFinalization per module detangled from runOn?? calls, still has temporary code not to break ASAN to be removed when that pass conforms to the proposed model
Patch by Pedro Artigas, with feedback from by Chandler Carruth.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168635 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-26 23:54:47 +00:00
Owen Anderson
40b6fdb81e Add doInitialization and doFinalization methods to ModulePass's, to allow them to be re-initialized and reused on multiple Module's.
Patch by Pedro Artigas.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168008 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-15 00:14:15 +00:00
Nadav Rotem
199063ea37 Opt does not need to initialize the Asm printer/parser
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166602 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-24 17:55:53 +00:00
Nadav Rotem
0873bea3ed Opt needs to initialize the different targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166595 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-24 17:23:50 +00:00
Nadav Rotem
cbd9a19b5d Reapply the TargerTransformInfo changes, minus the changes to LSR and Lowerinvoke.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166248 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-18 23:22:48 +00:00
Bob Wilson
3b9a911efc Temporarily revert the TargetTransform changes.
The TargetTransform changes are breaking LTO bootstraps of clang.  I am
working with Nadav to figure out the problem, but I am reverting it for now
to get our buildbots working.

This reverts svn commits: 165665 165669 165670 165786 165787 165997
and I have also reverted clang svn 165741

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166168 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-18 05:43:52 +00:00
Nadav Rotem
e3d0e86919 Add a new interface to allow IR-level passes to access codegen-specific information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165665 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-10 22:04:55 +00:00
Micah Villmow
791cfc211a Move TargetData to DataLayout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165403 91177308-0d34-0410-b5e6-96231b3b80d8
2012-10-08 16:39:34 +00:00
Logan Chien
7b3d77e8ce Code cleanup: tools/opt/opt.cpp
Remove unused local variable.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163061 91177308-0d34-0410-b5e6-96231b3b80d8
2012-09-01 14:43:30 +00:00
Bill Wendling
0bcbd1df7a Move lib/Analysis/DebugInfo.cpp to lib/VMCore/DebugInfo.cpp and
include/llvm/Analysis/DebugInfo.h to include/llvm/DebugInfo.h.

The reasoning is because the DebugInfo module is simply an interface to the
debug info MDNodes and has nothing to do with analysis.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159312 91177308-0d34-0410-b5e6-96231b3b80d8
2012-06-28 00:05:13 +00:00
Chandler Carruth
8bc3434e68 Teach the 'opt' tool about '-Os' and '-Oz', corresponding to the Clang
options, to enable easier testing of the innards of LLVM that are
enabled by such optimization strategies.

Note that this doesn't provide the (much needed) function attribute
support for -Oz (as opposed to -Os), but still seems like a positive
step to better test the logic that Clang currently relies on.

Patch by Patrik Hägglund.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@156913 91177308-0d34-0410-b5e6-96231b3b80d8
2012-05-16 08:32:49 +00:00