Without this, use of this copy ctor is deprecated in C++11 due to the
presence of a user-declared dtor.
Marking the class final is just a little extra security that there are
no further derived classes that may then end up using the intermediate
base class's copy assignment operator and cause slicing to occur.
I didn't bother marking the other (non-test) base class final, since it
has reference members so it won't have any implicit assignment operators
anyway. Open to ideas on that, though.
We probably want a warning about use of a slicing assignment operator,
then I wouldn't worry so much about marking the class as final.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231114 91177308-0d34-0410-b5e6-96231b3b80d8
Add the final bits of API that `DIBuilder` needs before the new nodes
can be moved into place.
- Add `MDType::clone()` and `MDType::setFlags()` to support
`DIBuilder::createTypeWithFlags()`.
- Add `MDBasicType::get()` overload that just requires a tag and a
name, as a convenience for `DIBuilder::createUnspecifiedType()`.
- Add `MDLocalVariable::withInline()` and
`MDLocalVariable::withoutInline()` to support
`llvm::createInlinedVariable()` and
`llvm::cleanseInlinedVariable()`.
(Somehow these got lost inside the "move into place" patch I'm about to
commit -- better to commit separately!)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231079 91177308-0d34-0410-b5e6-96231b3b80d8
By loading from indexed offsets into a byte array and applying a mask, a
program can test bits from the bit set with a relatively short instruction
sequence. For example, suppose we have 15 bit sets to lay out:
A (16 bits), B (15 bits), C (14 bits), D (13 bits), E (12 bits),
F (11 bits), G (10 bits), H (9 bits), I (7 bits), J (6 bits), K (5 bits),
L (4 bits), M (3 bits), N (2 bits), O (1 bit)
These bits can be laid out in a 16-byte array like this:
Byte Offset
0123456789ABCDEF
Bit
7 HHHHHHHHHIIIIIII
6 GGGGGGGGGGJJJJJJ
5 FFFFFFFFFFFKKKKK
4 EEEEEEEEEEEELLLL
3 DDDDDDDDDDDDDMMM
2 CCCCCCCCCCCCCCNN
1 BBBBBBBBBBBBBBBO
0 AAAAAAAAAAAAAAAA
For example, to test bit X of A, we evaluate ((bits[X] & 1) != 0), or to
test bit X of I, we evaluate ((bits[9 + X] & 0x80) != 0). This can be done
in 1-2 machine instructions on x86, or 4-6 instructions on ARM.
This uses the LPT multiprocessor scheduling algorithm to lay out the bits
efficiently.
Saves ~450KB of instructions in a recent build of Chromium.
Differential Revision: http://reviews.llvm.org/D7954
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231043 91177308-0d34-0410-b5e6-96231b3b80d8
When reading a yaml::SequenceTraits object, YAMLIO does not report an
error if the yaml item is not a sequence. Instead, YAMLIO reads an
empty sequence. For example:
---
seq:
foo: 1
bar: 2
...
If `seq` is a SequenceTraits object, then reading the above yaml will
yield `seq` as an empty sequence.
Fix this to report an error for the above mapping ("not a sequence")
Patch by William Fisher. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230976 91177308-0d34-0410-b5e6-96231b3b80d8
With initializer lists there is a really neat idiomatic way to write
this, 'ArrayRef.equals({1, 2, 3, 4, 5})'. Remove the equal method which
always had a hard limit on the number of arguments. I considered
rewriting it with variadic templates but that's not really a good fit
for a function with homogeneous arguments.
'ArrayRef == {1, 2, 3, 4, 5}' would've been even more awesome, but C++11
doesn't allow init lists with binary operators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230907 91177308-0d34-0410-b5e6-96231b3b80d8
Fix `MDScope::getFile()` so that it correctly returns a valid `MDFile`
even when it's an instance of `MDFile`. This logic is necessary because
of r230057. I'm working on moving the new hierarchy into place
out-of-tree (on track to commit Monday morning, BTW), and this was
exposed by a few failing tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230871 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
Remove a newline from `AssemblyWriter::printMDNodeBody()`, and add one
to `AssemblyWriter::writeMDNode()`. NFCI for assembly output.
However, this drops an inconsistent newline from `Metadata::print()`
when `this` is an `MDNode`. Now the newline added by `Metadata::dump()`
won't look so verbose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230565 91177308-0d34-0410-b5e6-96231b3b80d8
This change aligns globals to the next highest power of 2 bytes, up to a
maximum of 128. This makes it more likely that we will be able to compress
bit sets with a greater alignment. In many more cases, we can now take
advantage of a new optimization also introduced in this patch that removes
bit set checks if the bit set is all ones.
The 128 byte maximum was found to provide the best tradeoff between instruction
overhead and data overhead in a recent build of Chromium. It allows us to
remove ~2.4MB of instructions at the cost of ~250KB of data.
Differential Revision: http://reviews.llvm.org/D7873
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230540 91177308-0d34-0410-b5e6-96231b3b80d8
The builder is based on a layout algorithm that tries to keep members of
small bit sets together. The new layout compresses Chromium's bit sets to
around 15% of their original size.
Differential Revision: http://reviews.llvm.org/D7796
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230394 91177308-0d34-0410-b5e6-96231b3b80d8
I made my best guess at the Makefile, since I don't have a make build.
I'm not sure if it should be valid to add an empty list of things, but
it seemed the sort of degenerate case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230196 91177308-0d34-0410-b5e6-96231b3b80d8
Split debug info 'flags' bitfield over a vector so the current flags can
be iterated over. This API (in combination with r230107) will be used
for assembly support for symbolic constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230108 91177308-0d34-0410-b5e6-96231b3b80d8
Add `DIDescriptor::getFlag(StringRef)` and
`DIDescriptor::getFlagString(unsigned)`. The latter only converts exact
matches; I'll add separate API for breaking the flags bitfield up into
parts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230107 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a new mechanism that allows IR modules to co-operatively
build pointer sets corresponding to addresses within a given set of
globals. One particular use case for this is to allow a C++ program to
efficiently verify (at each call site) that a vtable pointer is in the set
of valid vtable pointers for the class or its derived classes. One way of
doing this is for a toolchain component to build, for each class, a bit set
that maps to the memory region allocated for the vtables, such that each 1
bit in the bit set maps to a valid vtable for that class, and lay out the
vtables next to each other, to minimize the total size of the bit sets.
The patch introduces a metadata format for representing pointer sets, an
'@llvm.bitset.test' intrinsic and an LTO lowering pass that lays out the globals
and builds the bitsets, and documents the new feature.
Differential Revision: http://reviews.llvm.org/D7288
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230054 91177308-0d34-0410-b5e6-96231b3b80d8
When trying to match the current schema with the new debug info
hierarchy, I downgraded `SizeInBits`, `AlignInBits` and `OffsetInBits`
to 32-bits (oops!). Caught this while testing my upgrade script to move
the hierarchy into place. Bump it back up to 64-bits and update tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229933 91177308-0d34-0410-b5e6-96231b3b80d8
Add missing `nullptr` from `MDSubroutineType`'s operands for
`MDCompositeTypeBase::getIdentifier()` (and add tests for all the other
unused fields). This highlights just how crazy it is that
`MDSubroutineType` inherits from `MDCompositeTypeBase`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229926 91177308-0d34-0410-b5e6-96231b3b80d8
Follow-up to r229740, which removed `DITemplate*::getContext()` after my
upgrade script revealed that scopes are always `nullptr` for template
parameters. This is the other shoe: drop `scope:` from
`MDTemplateParameter` and its two subclasses. (Note: a bitcode upgrade
would be pointless, since the hierarchy hasn't been moved into place.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229791 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that `count: -1` is a special value indicating an empty
array, such as `Values` in:
struct T {
unsigned Count;
int Values[];
};
Handle it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229769 91177308-0d34-0410-b5e6-96231b3b80d8
Add `replaceElements()`, `replaceVTableHolder()`, and
`replaceTemplateParams()` to `MDCompositeTypeBase`. Included an
assertion in `replaceElements()` to match the one in
`DICompositeType::replaceArrays()`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229744 91177308-0d34-0410-b5e6-96231b3b80d8
This was leading to duplicate counts when a code region happened to
overlap exactly with an expansion. The combining behaviour only makes
sense for code regions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229723 91177308-0d34-0410-b5e6-96231b3b80d8
This comes up when we generate coverage for a function but don't end
up emitting the function at all - dead static functions or inline
functions that aren't referenced in a particular TU, for example. In
these cases we'd like to show that the function was never called,
which is trivially true.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229717 91177308-0d34-0410-b5e6-96231b3b80d8
Make CoverageMapping easier to create, so that we can write targeted
unit tests for its internals, and add a some infrastructure to write
these tests. Finally, add a simple unit test for basic functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229709 91177308-0d34-0410-b5e6-96231b3b80d8
Have the InstrProfWriter return a MemoryBuffer instead of a
std::string. This fixes the alignment issues the reader would hit, and
it's a more appropriate type for this anyway.
I've also removed an ugly helper function that's not needed since
we're allowing initializer lists now, and updated some error code
checks based on MSVC's issues with r229473.
This reverts r229483, reapplying r229478.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229602 91177308-0d34-0410-b5e6-96231b3b80d8
Add missing specialized node overloads for `MDNode::clone()` (they were
on most of the node types already, but missing from the others).
`MDNode::clone()` returns `TempMDNode` (`std::unique_ptr<MDNode,...>`),
while `TempMDSubrange::clone()` (for example) returns the more
convenient `TempMDSubrange` (`std::unique_ptr<TempMDSubrange,...>`).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229579 91177308-0d34-0410-b5e6-96231b3b80d8
This time we use a helper to format the assertion so we can just use
ASSERT_TRUE instead of relying on ASSERT_EQ being able to deal with
conversions between enum types.
This reverts r229496, re-applying r229473.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229547 91177308-0d34-0410-b5e6-96231b3b80d8
If any of the bots complain (perhaps due to an antiquated version of an STL implementation), I will revert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229502 91177308-0d34-0410-b5e6-96231b3b80d8
This added API to the InstrProfWriter to write to a string so I could
write unittests without using temp files. This doesn't really work,
since the format has tighter alignment requirements than a char.
This reverts r229478 and its follow-up, r229481.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229483 91177308-0d34-0410-b5e6-96231b3b80d8
Add these tests again, but use va_list instead of initializer lists.
This reverts r229456, reapplying r229455.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229478 91177308-0d34-0410-b5e6-96231b3b80d8
This required some minor API to be added to these types to avoid
needing temp files.
Also, I've used initializer lists in the tests, as MSVC 2013 claims to
support them. I'll redo this without them if the bots complain.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229455 91177308-0d34-0410-b5e6-96231b3b80d8