The error reported the number of explicit operands,
but that isn't what is checked. In my case, this
resulted in the confusing errors
"Too few operands." followed shortly by
"8 operands expected, but 8 given."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194862 91177308-0d34-0410-b5e6-96231b3b80d8
Stop folding constant adds into GEP when the type size doesn't match.
Otherwise, the adds' operands are effectively being promoted, changing the
conditions of an overflow. Results are different when:
sext(a) + sext(b) != sext(a + b)
Problem originally found on x86-64, but also fixed issues with ARM and PPC,
which used similar code.
<rdar://problem/15292280>
Patch by Duncan Exon Smith!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194840 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When getConstant() is called for an expanded vector type, it is split into
multiple scalar constants which are then combined using appropriate build_vector
and bitcast operations.
In addition to the usual big/little endian differences, the case where the
element-order of the vector does not have the same endianness as the elements
themselves is also accounted for. For example, for v4i32 on big-endian MIPS,
the byte-order of the vector is <3210,7654,BA98,FEDC>. For little-endian, it is
<0123,4567,89AB,CDEF>.
Handling this case turns out to be a nop since getConstant() returns a splatted
vector (so reversing the element order doesn't change the value)
This fixes a number of cases in MIPS MSA where calling getConstant() during
operation legalization introduces illegal types (e.g. to legalize v2i64 UNDEF
into a v2i64 BUILD_VECTOR of illegal i64 zeros). It should also handle bigger
differences between illegal and legal types such as legalizing v2i64 into v8i16.
lowerMSASplatImm() in the MIPS backend no longer needs to avoid calling
getConstant() so this function has been updated in the same patch.
For the sake of transparency, the steps I've taken since the review are:
* Added 'virtual' to isVectorEltOrderLittleEndian() as requested. This revealed
that the MIPS tests were falsely passing because a polymorphic function was
not actually polymorphic in the reviewed patch.
* Fixed the tests that were now failing. This involved deleting the code to
handle the MIPS MSA element-order (which was previously doing an byte-order
swap instead of an element-order swap). This left
isVectorEltOrderLittleEndian() unused and it was deleted.
* Fixed build failures caused by rebasing beyond r194467-r194472. These build
failures involved the bset, bneg, and bclr instructions added in these commits
using lowerMSASplatImm() in a way that was no longer valid after this patch.
Some of these were fixed by calling SelectionDAG::getConstant() instead,
others were fixed by a new function getBuildVectorSplat() that provided the
removed functionality of lowerMSASplatImm() in a more sensible way.
Reviewers: bkramer
Reviewed By: bkramer
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D1973
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194811 91177308-0d34-0410-b5e6-96231b3b80d8
This is to avoid this transformation in some cases:
fold (conv (load x)) -> (load (conv*)x)
On architectures that don't natively support some vector
loads efficiently casting the load to a smaller vector of
larger types and loading is more efficient.
Patch by Micah Villmow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194783 91177308-0d34-0410-b5e6-96231b3b80d8
This comes into play with patchpoint, which can fold multiple
operands. Since the patchpoint is already treated as a call, the
machine mem operands won't affect anything, and there's nothing to
test. But we still want to do the right thing here to be sure that our
MIs obey the rules.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194750 91177308-0d34-0410-b5e6-96231b3b80d8
In ELF and COFF an alias is just another offset in a section. There is no way
to represent an alias to something in another file.
In MachO, the spec has the N_INDR type which should allow for exactly that, but
is not currently implemented. Given that it is specified but not implemented,
we error in codegen to avoid miscompiling but don't reject aliases to
declarations in the verifier to leave the option open of implementing it.
In the past we have used alias to declarations as a way of implementing
weakref, which is why it exists in some old tests which this patch updates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194705 91177308-0d34-0410-b5e6-96231b3b80d8
If a null call target is provided, don't emit a dummy call. This
allows the runtime to reserve as little nop space as it needs without
the requirement of emitting a call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194676 91177308-0d34-0410-b5e6-96231b3b80d8
This patch reapplies r193676 with an additional fix for the Hexagon backend. The
SystemZ backend has already been fixed by r194148.
The Type Legalizer recognizes that VSELECT needs to be split, because the type
is to wide for the given target. The same does not always apply to SETCC,
because less space is required to encode the result of a comparison. As a result
VSELECT is split and SETCC is unrolled into scalar comparisons.
This commit fixes the issue by checking for VSELECT-SETCC patterns in the DAG
Combiner. If a matching pattern is found, then the result mask of SETCC is
promoted to the expected vector mask type for the given target. Now the type
legalizer will split both VSELECT and SETCC.
This allows the following X86 DAG Combine code to sucessfully detect the MIN/MAX
pattern. This fixes PR16695, PR17002, and <rdar://problem/14594431>.
Reviewed by Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194542 91177308-0d34-0410-b5e6-96231b3b80d8
This will enable the PBQP register allocator to provide its own normalizing function.
No functionnal change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194417 91177308-0d34-0410-b5e6-96231b3b80d8
Besides, this relates it more obviously to the VirtRegAuxInfo::calculateSpillWeightAndHint.
No functionnal change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194404 91177308-0d34-0410-b5e6-96231b3b80d8
Based on discussions with Lang Hames and Jakob Stoklund Olesen at the hacker's lab, and in the light of upcoming work on the PBQP register allocator, it was though that CalcSpillWeights does not need to be a pass. This change will enable to customize / tune the spill weight computation depending on the allocator.
Update the documentation style while there.
No functionnal change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194356 91177308-0d34-0410-b5e6-96231b3b80d8
This patch moves the jump address materialization inside the noop slide. This
enables patching of the materialization itself or its complete removal. This
patch also adds the ability to define scratch registers that can be used safely
by the code called from the patchpoint intrinsic. At least one scratch register
is required, because that one is used for the materialization of the jump
address. This patch depends on D2009.
Differential Revision: http://llvm-reviews.chandlerc.com/D2074
Reviewed by Andy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194306 91177308-0d34-0410-b5e6-96231b3b80d8
The new graph structure replaces the node and edge linked lists with vectors.
Free lists (well, free vectors) are used for fast insertion/deletion.
The ultimate aim is to make PBQP graphs cheap to clone. The motivation is that
the PBQP solver destructively consumes input graphs while computing a solution,
forcing the graph to be fully reconstructed for each round of PBQP. This
imposes a high cost on large functions, which often require several rounds of
solving/spilling to find a final register allocation. If we can cheaply clone
the PBQP graph and incrementally update it between rounds then hopefully we can
reduce this cost. Further, once we begin pooling matrix/vector values (future
work), we can cache some PBQP solver metadata and share it between cloned
graphs, allowing the PBQP solver to re-use some of the computation done in
earlier rounds.
For now this is just a data structure update. The allocator and solver still
use the graph the same way as before, fully reconstructing it between each
round. I expect no material change from this update, although it may change
the iteration order of the nodes, causing ties in the solver to break in
different directions, and this could perturb the generated allocations
(hopefully in a completely benign way).
Thanks very much to Arnaud Allard de Grandmaison for encouraging me to get back
to work on this, and for a lot of discussion and many useful PBQP test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194300 91177308-0d34-0410-b5e6-96231b3b80d8
The idea of the AnyReg Calling Convention is to provide the call arguments in
registers, but not to force them to be placed in a paticular order into a
specified set of registers. Instead it is up tp the register allocator to assign
any register as it sees fit. The same applies to the return value (if
applicable).
Differential Revision: http://llvm-reviews.chandlerc.com/D2009
Reviewed by Andy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194293 91177308-0d34-0410-b5e6-96231b3b80d8
isPhysRegUsed if the unwind information is required.
Indeed, the runtime may need a correct stack to be able to unwind the call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194271 91177308-0d34-0410-b5e6-96231b3b80d8
Based on discussions with Lang Hames and Jakob Stoklund Olesen at the hacker's lab, and in the light of upcoming work on the PBQP register allocator, it was though that CalcSpillWeights does not need to be a pass. This change will enable to customize / tune the spill weight computation depending on the allocator.
Update the documentation style while there.
No functionnal change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194269 91177308-0d34-0410-b5e6-96231b3b80d8
MorphNodeTo is not safe to call during DAG building. It eagerly
deletes dependent DAG nodes which invalidates the NodeMap. We could
expose a safe interface for morphing nodes, but I don't think it's
worth it. Just create a new MachineNode and replaceAllUsesWith.
My understaning of the SD design has been that we want to support
early target opcode selection. That isn't very well supported, but
generally works. It seems reasonable to rely on this feature even if
it isn't widely used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194102 91177308-0d34-0410-b5e6-96231b3b80d8
linkonce_odr_auto_hide was in incomplete attempt to implement a way
for the linker to hide symbols that are known to be available in every
TU and whose addresses are not relevant for a particular DSO.
It was redundant in that it all its uses are equivalent to
linkonce_odr+unnamed_addr. Unlike those, it has never been connected
to clang or llvm's optimizers, so it was effectively dead.
Given that nothing produces it, this patch just nukes it
(other than the llvm-c enum value).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193865 91177308-0d34-0410-b5e6-96231b3b80d8
We add a map in DwarfDebug to map MDNodes that are shareable across CUs to the
corresponding DIEs: MDTypeNodeToDieMap. These DIEs can be shared across CUs,
that is why we keep the maps in DwarfDebug instead of CompileUnit.
We make the assumption that if a DIE is not added to an owner yet, we assume
it belongs to the current CU. Since DIEs for the type system are added to
their owners immediately after creation, and other DIEs belong to the current
CU, the assumption should be true.
A testing case is added to show that we only create a single DIE for a type
MDNode and we use ref_addr to refer to the type DIE.
We also add a testing case to show ref_addr relocations for non-darwin
platforms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193779 91177308-0d34-0410-b5e6-96231b3b80d8
When an extend more than doubles the size of the elements (e.g., a zext
from v16i8 to v16i32), the normal legalization method of splitting the
vectors will run into problems as by the time the destination vector is
legal, the source vector is illegal. The end result is the operation
often becoming scalarized, with the typical horrible performance. For
example, on x86_64, the simple input of:
define void @bar(<16 x i8> %a, <16 x i32>* %p) nounwind {
%tmp = zext <16 x i8> %a to <16 x i32>
store <16 x i32> %tmp, <16 x i32>*%p
ret void
}
Generates:
.section __TEXT,__text,regular,pure_instructions
.section __TEXT,__const
.align 5
LCPI0_0:
.long 255 ## 0xff
.long 255 ## 0xff
.long 255 ## 0xff
.long 255 ## 0xff
.long 255 ## 0xff
.long 255 ## 0xff
.long 255 ## 0xff
.long 255 ## 0xff
.section __TEXT,__text,regular,pure_instructions
.globl _bar
.align 4, 0x90
_bar:
vpunpckhbw %xmm0, %xmm0, %xmm1
vpunpckhwd %xmm0, %xmm1, %xmm2
vpmovzxwd %xmm1, %xmm1
vinsertf128 $1, %xmm2, %ymm1, %ymm1
vmovaps LCPI0_0(%rip), %ymm2
vandps %ymm2, %ymm1, %ymm1
vpmovzxbw %xmm0, %xmm3
vpunpckhwd %xmm0, %xmm3, %xmm3
vpmovzxbd %xmm0, %xmm0
vinsertf128 $1, %xmm3, %ymm0, %ymm0
vandps %ymm2, %ymm0, %ymm0
vmovaps %ymm0, (%rdi)
vmovaps %ymm1, 32(%rdi)
vzeroupper
ret
So instead we can check if there are legal types that enable us to split
more cleverly when the input vector is already legal such that we don't
turn it into an illegal type. If the extend is such that it's more than
doubling the size of the input we check if
- the number of vector elements is even,
- the source type is legal,
- the type of a split source is illegal,
- the type of an extended (by doubling element size) source is legal, and
- the type of that extended source when split is legal.
If the conditions are met, instead of just splitting both the
destination and the source types, we create an extend that only goes up
one "step" (doubling the element width), and the continue legalizing the
rest of the operation normally. The result is that this operates as a
new, more effecient, termination condition for the loop of "split the
operation until the destination type is legal."
With this change, the above example now compiles to:
_bar:
vpxor %xmm1, %xmm1, %xmm1
vpunpcklbw %xmm1, %xmm0, %xmm2
vpunpckhwd %xmm1, %xmm2, %xmm3
vpunpcklwd %xmm1, %xmm2, %xmm2
vinsertf128 $1, %xmm3, %ymm2, %ymm2
vpunpckhbw %xmm1, %xmm0, %xmm0
vpunpckhwd %xmm1, %xmm0, %xmm3
vpunpcklwd %xmm1, %xmm0, %xmm0
vinsertf128 $1, %xmm3, %ymm0, %ymm0
vmovaps %ymm0, 32(%rdi)
vmovaps %ymm2, (%rdi)
vzeroupper
ret
This generalizes a custom lowering that was added a while back to the
ARM backend. That lowering is no longer necessary, and is removed. The
testcases for it, however, provide excellent ARM tests for this change
and so remain.
rdar://14735100
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193727 91177308-0d34-0410-b5e6-96231b3b80d8
With this patch llvm produces a weak_def_can_be_hidden for linkonce_odr
if they are also unnamed_addr or don't have their address taken.
There is not a lot of documentation about .weak_def_can_be_hidden, but
from the old discussion about linkonce_odr_auto_hide and the name of
the directive this looks correct: these symbols can be hidden.
Testing this with the ld64 in Xcode 5 linking clang reduces the number of
exported symbols from 21053 to 19049.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193718 91177308-0d34-0410-b5e6-96231b3b80d8
The Type Legalizer recognizes that VSELECT needs to be split, because the type
is to wide for the given target. The same does not always apply to SETCC,
because less space is required to encode the result of a comparison. As a result
VSELECT is split and SETCC is unrolled into scalar comparisons.
This commit fixes the issue by checking for VSELECT-SETCC patterns in the DAG
Combiner. If a matching pattern is found, then the result mask of SETCC is
promoted to the expected vector mask type for the given target. This mask has
usually the same size as the VSELECT return type (except for Intel KNL). Now the
type legalizer will split both VSELECT and SETCC.
This allows the following X86 DAG Combine code to sucessfully detect the MIN/MAX
pattern. This fixes PR16695, PR17002, and <rdar://problem/14594431>.
Reviewed by Nadav
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193676 91177308-0d34-0410-b5e6-96231b3b80d8
Use EmitLabelOffsetDifference for handling on darwin platform when
non-darwin platforms use EmitLabelPlusOffset.
Also fix a bug in EmitLabelOffsetDifference where the size is hard-coded
to 4 even though Size is passed in as an argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193660 91177308-0d34-0410-b5e6-96231b3b80d8
To support ref_addr, we calculate the section offset of a DIE (i.e. offset
of a DIE from beginning of the debug info section). The Offset field in DIE
is currently CU-relative. To calculate the section offset, we add a
DebugInfoOffset field in CompileUnit to store the offset of a CU from beginning
of the debug info section. We set the value in DwarfUnits::computeSizeAndOffset
for each CompileUnit.
A helper function DIE::getCompileUnit is added to return the CU DIE that
the input DIE belongs to. We also add a map CUDieMap in DwarfDebug to help
finding the CU for a given CU DIE.
For a cross-referenced DIE, we first find the CU DIE it belongs to with
getCompileUnit, then we use CUDieMap to get the corresponding CU for the CU DIE.
Adding the section offset of the CU with the CU-relative offset of a DIE gives
us the seciton offset of the DIE.
We correctly emit ref_addr with relocation using EmitLabelPlusOffset when
doesDwarfUseRelocationsAcrossSections is true.
This commit handles the emission of DW_FORM_ref_addr when we have an attribute
with FORM_ref_addr. A follow-on patch will start using ref_addr when adding a
DIEEntry. This commit will be tested and verified in the follow-on patch.
Reviewed off-list by Eric, Thanks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193658 91177308-0d34-0410-b5e6-96231b3b80d8
after the DIE creation, we construct the context first.
Ensure that we create the context before we create a type so that we can add
the newly created type to the parent. Remove last use of addToContextOwner
now that it's not needed.
We use createAndAddDIE to wrap around "new DIE(". Now all shareable DIEs
should be added to their parents right after the creation.
Reviewed off-list by Eric, Thanks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193657 91177308-0d34-0410-b5e6-96231b3b80d8
This modifies the pass to classify every SSP-triggering AllocaInst according to
an SSPLayoutKind (LargeArray, SmallArray, AddrOf). This analysis is collected
by the pass and made available for use, but no other pass uses it yet.
The next patch will make use of this analysis in PEI and StackSlot
passes. The end goal is to support ssp-strong stack layout rules.
WIP.
Differential Revision: http://llvm-reviews.chandlerc.com/D1789
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193653 91177308-0d34-0410-b5e6-96231b3b80d8
after the DIE creation, we construct the context first.
This touches creation of namespaces and global variables. The purpose is to
handle all DIE creations similarly: constructs the context first, then creates
the DIE and immediately adds the DIE to its parent.
We use createAndAddDIE to wrap around "new DIE(".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193589 91177308-0d34-0410-b5e6-96231b3b80d8
This commit ensures DIEs are constructed within a compile unit and
immediately added to their parents.
Reviewed off-list by Eric.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193568 91177308-0d34-0410-b5e6-96231b3b80d8
More patches will be submitted to convert "new DIE(" to use createAddAndDIE in
DwarfCompileUnit.cpp. This will simplify implementation of addDIEEntry where
we have to decide between ref4 and ref_addr, because DIEs that can be shared
across CU will be added to a CU already.
Reviewed off-list by Eric.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193567 91177308-0d34-0410-b5e6-96231b3b80d8
It wraps around "new DIE(" and handles the bookkeeping part of the newly-created
DIE. It adds the DIE to its parent, and calls insertDIE if necessary. It makes
sure that bookkeeping is done at the earliest time and we should not see
parentless DIEs if all constructions of DIEs go through this helper function.
Later on, we can use an allocator for DIE allocation, and will only need to
change createAndAddDIE instead of modifying all the "new DIE(".
Reviewed off-list by Eric.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193566 91177308-0d34-0410-b5e6-96231b3b80d8
Making useAA() default to true for SystemZ showed that the combiner alias
analysis wasn't handling volatile accesses. This hit many of the SystemZ
tests, but I arbitrarily picked one for the purpose of this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193518 91177308-0d34-0410-b5e6-96231b3b80d8
Most SelectionDAG code drops the TBAA info when creating a new form of a
load and store (e.g. during legalization, or when converting a plain
load to an extending one). This patch tries to catch all cases where
the TBAA information can legitimately be carried over.
The patch adds alternative forms of getLoad() and getExtLoad() that take
a MachineMemOperand instead of individual fields. (The corresponding
getTruncStore() already exists.) The idea is to use the MachineMemOperand
forms when all fields are carried over (size, pointer info, isVolatile,
isNonTemporal, alignment and TBAA info). If some adjustment is being
made, e.g. to narrow the load, then we still pass the individual fields
but also pass the TBAA info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193517 91177308-0d34-0410-b5e6-96231b3b80d8
ARM processors without ldrex/strex need to be able to make libcalls for all
atomic operations, including the newer min/max versions.
The alternative would probably be expanding these operations in terms of
cmpxchg (as x86 does always), but in the configurations where this matters
code-size tends to be paramount so the libcall is more desirable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193398 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization is not SSE specific so I am moving it to DAGco.
The new scalar_to_vector dag node exposed a missing pattern in the AArch64 target that I needed to add.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193393 91177308-0d34-0410-b5e6-96231b3b80d8
Also improve the implementation of EmitRawText(Twine) so it doesn't
bother using the SmallString buffer if the Twine is a simple StringRef
anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193378 91177308-0d34-0410-b5e6-96231b3b80d8
This may've been used at some point but the 'print' member function grew
an Indent parameter that entirely shadows this parameter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193358 91177308-0d34-0410-b5e6-96231b3b80d8
Since we never insert DIE for DITemplateTypeParameter to a map, there is no need
to call getDIE in getOrCreateTemplateTypeParameterDIE. It is also renamed to
constructTemplateTypeParameterDIE to match with other construct functions
in CompileUnit.
Same applies to getOrCreateTemplateValueParameterDIE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193287 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the unneeded return values from createMemberDIE, constructEnumTypeDIE,
getOrCreateTemplateTypeParameterDIE, and getOrCreateTemplateValueParameterDIE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193285 91177308-0d34-0410-b5e6-96231b3b80d8
For some targets, it is useful to be able to look at the original
type of an argument without having to dig through the original IR.
This also fixes a bug in SelectionDAGBuilder where InputArg.PartOffset
was not taking into account the offset of structure elements.
Patch by: Justin Holewinski
Tom Stellard:
- Changed the type of ArgVT to EVT, so it can store non-simple types
like v3i32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193214 91177308-0d34-0410-b5e6-96231b3b80d8
Remove unnecessary creation of LexicalScope in collectDeadVariables.
The created LexicialScope was only used to get isAbstractScope, which
should be false from the creation:
"new LexicalScope(NULL, DIDescriptor(SP), NULL, false);".
We can also remove a DenseMap that holds the created LexicalScopes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193196 91177308-0d34-0410-b5e6-96231b3b80d8
Since (as of r190716) Clang no longer emits debug info for C++ friend
declarations (and it seems GCC never has/does, which was the motivation
for the Clang change), there's no actual reachable case for implementing
the part of DWARF 4, Section 7.27 part 5 that pertains to friends.
Leave an assert here so that if/when we do have a client producing
friends and using type units, we can fill in the gap and add appropriate
(unit and feature) tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193193 91177308-0d34-0410-b5e6-96231b3b80d8
Includes a test case/FIXME demonstrating a bug/limitation in pointer to
member hashing. To be honest I'm not sure why we don't just always use
summary hashing for referenced types... but perhaps I'm missing
something.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193175 91177308-0d34-0410-b5e6-96231b3b80d8