This adds a second implementation of the AArch64 architecture to LLVM,
accessible in parallel via the "arm64" triple. The plan over the
coming weeks & months is to merge the two into a single backend,
during which time thorough code review should naturally occur.
Everything will be easier with the target in-tree though, hence this
commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205090 91177308-0d34-0410-b5e6-96231b3b80d8
add_definitions shouldn't really be used for compiler flags, and the variable
LLVM_DEFINITIONS is not appropriately used at the moment, e.g. it's not exported
to LLVMConfig.cmake
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203792 91177308-0d34-0410-b5e6-96231b3b80d8
I personally build with these settings enabled all the time, and it
is clearer to see the actual warning flags (e.g., -Wuninitialized)
get passed by Xcode rather than seeing -Wno-uninitialized followed
by -Wall (the latter canceling out the former) and figuring out
what is going on.
Xcode will ignore build settings it doesn't understand, so this will
work on possibly older versions of Xcode that don't support all
of these settings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203760 91177308-0d34-0410-b5e6-96231b3b80d8
Without this common features like off_t and strdup are missing.
This should bring back those bots.
Configure bits by Meador Inge.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203701 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM_ENABLE_CXX1Y (default *off*). =D C++98 is dead. Long live C++11.
I don't exactly recommend using C++1y just yet though...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202567 91177308-0d34-0410-b5e6-96231b3b80d8
target_link_libraries(INTERFACE) doesn't bring inter-target dependencies in add_library,
although final targets have dependencies to whole dependent libraries.
It makes most libraries can be built in parallel.
target_link_libraries(PRIVATE) is used to shaared library.
Each dependent library is linked to the target.so, and its user will not see its grandchildren.
For example,
- libclang.so has sufficient libclang*.a(s).
- c-index-test requires just only libclang.so.
FIXME: lld is tweaked minimally. Adding INTERFACE in each library would be better thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202241 91177308-0d34-0410-b5e6-96231b3b80d8
The LLVMSupport library implementation consolidates all dependencies on
system libraries. Move the logic gathering system libraries out of
'cmake/modules/LLVM-Config.cmake' and into 'lib/Support/CMakeLists.txt'.
Use the target_link_libraries() command there to tell CMake about the
link dependencies of the LLVMSupport implementation. CMake will
automatically propagate this to all targets that link LLVMSupport
directly or indirectly.
We still need to build knowledge of system library dependencies into
'llvm-config'. Store the list of libraries needed in a property on
LLVMSupport and teach 'tools/llvm-config/CMakeLists.txt' to retrieve it
from there.
Drop all calls to 'link_system_libs' and 'get_system_libs' from our
CMake code. Replace their implementations with a warning that explains
the calls are no longer necessary. Also drop from 'LLVMConfig.cmake'
the HAVE_* and related variables that were published there only to allow
'get_system_libs' to run outside our build process.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201969 91177308-0d34-0410-b5e6-96231b3b80d8
llvm_add_library(foo SHARED STATIC
DEPENDS <dependent targets...>
LINK_LIBS <required libraries...>
)
It generates both foo (foo.so) and foo_static(foo.a) and both of them depend on DEPENDS and LINK_LIBS.
Then, also obj.foo is generated. obj.foo depends on DEPENDS, but doesn't depend on LINK_LIBS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201854 91177308-0d34-0410-b5e6-96231b3b80d8
The module still needs to collect the list of all available libraries
in order to satisfy the 'all' component. Provide this in the package
configuration file, 'LLVMConfig.cmake', as a LLVM_AVAILABLE_LIBS
variable. (A variable is scoped better than a global property.)
Since this won't be set for our own build, fall back to looking up the
LLVM_LIBS property to get the value when it is not set.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201853 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM library names are now available as logical CMake targets both
to our own build and to application CMake code. Replace use of
'list(FIND)' with a simple 'if(TARGET)' to determine whether a
library is available.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201852 91177308-0d34-0410-b5e6-96231b3b80d8
On unsupported platforms, llvm_add_library(MODULE) doesn't create any targets.
Caller may be responsible to check and add extra target properties.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201320 91177308-0d34-0410-b5e6-96231b3b80d8
FIXME: llvm/test may be aware of LLVM_PLUGIN_EXT, like as clang/test does.
FIXME: CMAKE_*_SUFFIX may be set in HandleLLVMOptions if those variables could be writable, rather than to set one as target properties.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201316 91177308-0d34-0410-b5e6-96231b3b80d8
I was insightless then about unknown optional parameters.
(Consider that LINK_LIBS foo bar ADDITIONAL_HEADERS qux quux)
Suggested by Michael Kruse. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201283 91177308-0d34-0410-b5e6-96231b3b80d8
This macro depends on several variables to be set in the calling
context. Check them and report an error if they are not set.
Without this, custom commands may be silently specified that
will fail at build time.
Patch by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201229 91177308-0d34-0410-b5e6-96231b3b80d8
- MODULE;SHARED;STATIC
STATIC by default w/o BUILD_SHARED_LIBS.
SHARED by default w/ BUILD_SHARED_LIBS.
- OUTPUT_NAME name
Corresponds to OUTPUT_NAME in target properties.
- DEPENDS targets...
Same semantics as add_dependencies().
- LINK_COMPONENTS components...
Same as the variable LLVM_LINK_COMPONENTS.
- LINK_LIBS lib_targets...
Same semantics as target_link_libraries().
- ADDITIONAL_HEADERS (implemented in LLVMProcessSources)
May specify header files for IDE generators.
I suggest llvm_add_library() may be used for inter-project add_library stuff
and also suggest add_***_library() may be used project-specific.
Please be patient that llvm_add_library might be ambiguous against add_llvm_library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201072 91177308-0d34-0410-b5e6-96231b3b80d8
I am sure it'd not be required any more.
In trunk, all of tablegen's users depend on ${TABLEGEN_OUTPUT} as not file dependency but inter-target dependency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201063 91177308-0d34-0410-b5e6-96231b3b80d8
CMake's target_link_libraries() will manage dependencies with Brad's LLVMConfig improvements.
Configuration time may be reduced by a few seconds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201062 91177308-0d34-0410-b5e6-96231b3b80d8
You can't put a comment in the middle of a command like this. This is
invalid shell syntax and breaks the build.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201057 91177308-0d34-0410-b5e6-96231b3b80d8
Teach the Makefile build system to generate and install CMake modules
LLVMConfig.cmake and LLVMConfigVersion.cmake so that applications that
build with CMake can use 'find_package(LLVM)' even when LLVM is not
built with CMake. These modules tell such applications about available
LLVM libraries and their dependencies.
Run llvm-config to generate the list of libraries and use the results of
llvm-build to generate the library dependencies. Use sed to perform
substitutions in the LLVMConfig.cmake.in and LLVMConfigVersion.cmake.in
sources that our CMake build system uses.
Teach the Makefile build system to generate the LLVMExports.cmake file
with content similar to that produced by the CMake install(EXPORT)
command. Extend llvm-build with an option to generate the library
dependencies fragment for this file.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201053 91177308-0d34-0410-b5e6-96231b3b80d8
Teach each package configuration file to load the LLVMExports file for
its corresponding tree. This will allow application CMake code to use
logical library and executable target names from LLVM as if they were in
our own build process (e.g. LLVMSupport). CMake will have enough
information to propagate LLVM library link dependencies automatically
while configuring applications.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201051 91177308-0d34-0410-b5e6-96231b3b80d8
Record every logical target that we install with install(TARGETS) in a
global LLVM_EXPORTS property. Then use the export(TARGETS) command to
provide a "LLVMExports.cmake" file that exports logical targets for
import into applications directly from our build tree.
The "LLVMExports.cmake" file is not meant for direct inclusion by
application code but should be included by "LLVMConfig.cmake" in a
future change.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201050 91177308-0d34-0410-b5e6-96231b3b80d8
Use the install(TARGETS) command EXPORT option for every library and
executable that we install with LLVM. Then use the install(EXPORT)
command to provide a "LLVMExports.cmake" file that exports logical
targets for import into applications from our install tree.
The "LLVMExports.cmake" file is not meant for direct inclusion by
application code but should be included by "LLVMConfig.cmake" in a
future change.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201049 91177308-0d34-0410-b5e6-96231b3b80d8
Create separate package configuration files "LLVMConfig.cmake" for the
LLVM build and install trees so that each can have information specific
to its tree. Configure each with the corresponding include, lib, and
cmake directories. Include the "LLVM-Config" API modules directly from
the configured cmake modules directory.
In the install tree, compute the installation prefix relative to the
file location. In the build tree, provide information specific to the
build tree for use by tools like Clang that can build externally against
the LLVM build tree. Prefix such values in "LLVM_BUILD_" and comment
them as such.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201048 91177308-0d34-0410-b5e6-96231b3b80d8
Do not modify this value on the application's behalf and just ensure API
modules are always available next to the LLVMConfig module. This is
already the case in the install tree so use file(COPY) to make it so in
the build tree. Include the LLVM-Config API module from next to the
LLVMConfig location.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201047 91177308-0d34-0410-b5e6-96231b3b80d8
Use a LLVM_INSTALL_PACKAGE_DIR variable to hold the path and reference
it where necessary.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201046 91177308-0d34-0410-b5e6-96231b3b80d8
ISSUE:
On Ubuntu 12.04 LTS, arc4random is provided by libbsd.so, which is a
transitive dependency of libedit. If a system had libedit on it that
was implemented in terms of libbsd.so, then the arc4random test,
previously implemented as a linker test, would succeed with -ledit.
However, on Ubuntu this would also require a #include <bsd/stdlib.h>.
This caused a build breakage on configure-based Ubuntu 12.04 with
libedit installed.
FIX:
This fix changes configure to test for arc4random by searching for it
in the standard header files. On Ubuntu 12.04, this test now properly
fails to find arc4random as it is not defined in the default header
locations. It also tweaks the #define names to match the output of the
header check command, which is slightly different than the linker
function check #defines.
I tested the following scenarios:
(1) Ubuntu 12.04 without the libedit package [did not find arc4random,
as expected]
(2) Ubuntu 12.04 with libedit package [properly did not find
arc4random, as expected]
(3) Ubuntu 12.04 with most recent libedit, custom built, and not
dependent on libbsd.so [properly did not find arc4random, as
expected].
(4) FreeBSD 10.0B1 [properly found arc4random, as expected]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200819 91177308-0d34-0410-b5e6-96231b3b80d8
CMake won't expand the dependency graph for us if the dependencies are in
another project, which leads to link errors in the standalone build.
This is a refinement of r200765.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200812 91177308-0d34-0410-b5e6-96231b3b80d8
r200744 moved this into cmake/config-ix.cmake, so that it would happen very
early in the build process. However, standalone builds of Clang and other
external projects never include this file (which is correct).
Now, -stdlib=libc++ and the LLVM_COMPILER_IS_GCC_COMPATIBLE option are
both set in a new include file, HandleLLVMStdlib, which is included by
both config-ix.cmake and HandleLLVMOptions.cmake. This preserves existing
behavior for projects relying on HandleLLVMOptions and still does the
right thing for builds of LLVM itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200811 91177308-0d34-0410-b5e6-96231b3b80d8
CMake's target_link_libraries() will manage dependencies.
Configuration time may be reduced by a few seconds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200765 91177308-0d34-0410-b5e6-96231b3b80d8
In trunk, every users assume add_llvm_loadable_module as "loadable module" and no one sets neither SHARED, ... nor also MODULE!
Unfortunately, all loadable modules were linked as not "MODULE" but "SHARED".
If this change caused any regressions, I wish guys to fix it properly. ;)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200762 91177308-0d34-0410-b5e6-96231b3b80d8
If LLVM_ENABLE_LIBCXX is specified, we should append -stdlib=libc++ to build
flags as early as possible, in particular, before we check for header presence
(as -stdlib=libc++ modifies header lookup rules). Otherwise we can find a header
at configure time (w/o -stdlib=libc++) but fail to find it at build time
(with -stdlib=libc++). See PR18569 for more details.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200744 91177308-0d34-0410-b5e6-96231b3b80d8
It missed include/llvm/Target. Could I avoid GLOB_RECURSE anyways? :(
FYI, I intended to prune ${LLVM_MAIN_INCLUDE_DIR} in TableGen.cmake in r200150.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200730 91177308-0d34-0410-b5e6-96231b3b80d8
This will disable -ffunction-sections in older versions of Clang where it
breaks build of sanitizer runtime library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200695 91177308-0d34-0410-b5e6-96231b3b80d8
This library will be used by clang-query. I can imagine LLDB becoming another
client of this library, so I think LLVM is a sensible place for it to live.
It wraps libedit, and adds tab completion support.
The code is loosely based on the line editor bits in LLDB, with a few
improvements:
- Polymorphism for retrieving the list of tab completions, based on
the concept pattern from the new pass manager.
- Tab completion doesn't corrupt terminal output if the input covers
multiple lines. Unfortunately this can only be done in a truly horrible
way, as far as I can tell. But since the alternative is to implement our
own line editor (which I don't think LLVM should be in the business of
doing, at least for now) I think it may be acceptable.
- Includes a fallback for the case where the user doesn't have libedit
installed.
Note that this uses C stdio, mainly because libedit also uses C stdio.
Differential Revision: http://llvm-reviews.chandlerc.com/D2200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200595 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM_REQUIRES_EH implies LLVM_REQUIRES_RTTI. It is as same behavior as Makefile.rule's.
llvm/examples/ExceptionDemo is affected. (It was built with -fno-rtti.)
For MSVC, Remove flags like "/EHsc /GR" in HandleLLVMOptions, or CL.EXE complains with flags like "/GR /GR-".
llvm_update_compile_flags() updates source file property if the target contains *.c.
COMPILE_FLAGS in target properties affects both C++ and C!
LLVM_NO_RTTI is deprecated. It was introduced by me and was my mistake.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200301 91177308-0d34-0410-b5e6-96231b3b80d8
With this tweaks, also unittests are compiled with -ffunction-sections.
It's hard to control contextual CMAKE_CXX_FLAGS. We should get rid of twiddling it as possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200299 91177308-0d34-0410-b5e6-96231b3b80d8
ADDITIONAL_HEADERS is intended to add header files for IDEs as hint.
For example:
add_llvm_library(LLVMSupport
Host.cpp
ADDITIONAL_HEADERS
Unix/Host.inc
Windows/Host.inc
)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199639 91177308-0d34-0410-b5e6-96231b3b80d8
In LLVM build tree, they points corresponding INTDIR.
In Clang standalone tree, they points external dir (llvm-config's --bindir and --libdir).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199595 91177308-0d34-0410-b5e6-96231b3b80d8
accidentally pick that up while using Clang and run into subtle bugs
down the road related to C++11 features not fully implemented in that
version of the standard library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199484 91177308-0d34-0410-b5e6-96231b3b80d8
The generation of the native_export_file end up in
several different makefiles. All those makefiles
write the same file, but can be executed concurrently...
and bad things happen!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199356 91177308-0d34-0410-b5e6-96231b3b80d8
option with the others in the top level CMakeLists, and put the check in
HandleLLVMOptions. This will also let it be used from the standalone
Clang builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199149 91177308-0d34-0410-b5e6-96231b3b80d8
likely to be reverted and re-applied a few times. The minimum versions
we're aiming at:
GCC 4.7
Clang 3.1
MSVC 17.0 (Visual Studio 2012)
Let me know if something breaks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199145 91177308-0d34-0410-b5e6-96231b3b80d8
This is needed to support the addition of tests for clang loadable plugins.
In clang, plugins are built as modules (bundles on OS X) rather than dynamic
libraries (dylib) so the build system needs to inform lit of the actual
file extension in use, typically '.so' on Unix and '.dll' on Windows.
(LLVM itself should probably switch to this scheme to fix PR14903 once and for
all.)
No change in build output or functionality intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198746 91177308-0d34-0410-b5e6-96231b3b80d8
Plugins need to go in build/Debug/lib as well (rather than build/lib/Debug).
Also, fix the SHLIBDIR path for Xcode, which by default includes Xcode build
settings rather than a simple %(build_mode)s parameter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198344 91177308-0d34-0410-b5e6-96231b3b80d8
When building Clang separately from LLVM with CMake, one should set
the path of llvm-config via the cache variable LLVM_CONFIG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198316 91177308-0d34-0410-b5e6-96231b3b80d8
We have been seeing nasty directory layout with CMake multiconfig, such as,
bin/Release/clang.exe
lib/clang/3.x/...
lib/Release/clang/3.x/.. (duplicated)
Move the layout similar to autoconf's;
Release/bin/clang.exe
Release/lib/clang/3.x/...
Checked on Visual Studio 10. Could you guys please confirm my change on XCode(and other multiconfig builders)?
Note: Don't set variables CMAKE_*_OUTPUT_DIRECTORY any more, or a certain builder, for eaxample, msbuild.exe, would be confused.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198205 91177308-0d34-0410-b5e6-96231b3b80d8
r198153 fixed the msvs bot problem, but broke a msysgit bot. This change
hopefully makes both variants happy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198156 91177308-0d34-0410-b5e6-96231b3b80d8
The windows ninja build is now green, but msvs is still unhappy. Maybe that's
because the .def file was passed when building LTO_static, so only pass
symbol lists for shared libraries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198151 91177308-0d34-0410-b5e6-96231b3b80d8
The command that cmd.exe is complaining about is:
cmd.exe /c cd /D C:\bb-win7\cmake-clang-i686-mingw32\build\tools\lto && cmake -E echo EXPORTS > symbol.def && type C:/bb-win7/cmake-clang-i686-mingw32/llvm-project/llvm/tools/lto/lto.exports >> symbol.def
Maybe quoting the filename helps.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198140 91177308-0d34-0410-b5e6-96231b3b80d8
The cmake build didn't support EXPORTED_SYMBOL_FILE. Instead, it had a
Windows-only implementation in tools/lto/CMakeLists.txt, a linux-only
implementation in tools/gold/CMakeLists.txt, and a darwin-only implementation
in tools/clang/tools/libclang/CMakeLists.txt.
This attempts to consolidate these one-offs into a single place. Clients can now
just set LLVM_EXPORTED_SYMBOL_FILE and things (hopefully) Just Work, like in
the make build.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198136 91177308-0d34-0410-b5e6-96231b3b80d8
This changes Clang standalone builds so that clang-tblgen lives in
clang/build/bin instead of llvm/build/bin, and so that with the Xcode
generator it's in clang/build/bin/Debug instead of llvm/build/bin/Debug/Debug/.
Yes, really.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197590 91177308-0d34-0410-b5e6-96231b3b80d8
Each of them forms like;
${CMAKE_BINARY_DIR}/bin/${CMAKE_CFG_INTDIR}
${CMAKE_BINARY_DIR}/lib/${CMAKE_CFG_INTDIR}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197394 91177308-0d34-0410-b5e6-96231b3b80d8
I think, in principle, intrinsics_gen may be added explicitly.
That said, it can be added incidentally, since each target already has dependencies to llvm-tblgen.
Almost all source files depend on both CommonTaleGen and intrinsics_gen.
Explicit add_dependencies() have been pruned under lib/Target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195929 91177308-0d34-0410-b5e6-96231b3b80d8
add_public_tablegen_target adds *CommonTableGen to LLVM_COMMON_DEPENDS.
LLVM_COMMON_DEPENDS affects add_llvm_library (and other add_target stuff) within its scope.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195927 91177308-0d34-0410-b5e6-96231b3b80d8
In some case, it may be required to build LLVM in C++11 mode, as some the subprojects (like lldb) requires it.
This mimics the autoconf behaviour.
However, given the discussions on the switch to C++11 of the codebase, this behaviour should evolve to default to C++11 with some checks of the compiler capabilities.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195727 91177308-0d34-0410-b5e6-96231b3b80d8
for release builds.
This is a follow-up to r194589. Aaron pointed out that building
libraries with /MT and using them in an application that uses a
different run-time library can be a bad idea.
Move the option to build with /MT behind a CMake option so it can be
turned on selectively, such as when building the toolchain installer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194596 91177308-0d34-0410-b5e6-96231b3b80d8
After r192904, Reid pointed out he thought we already set the stack
size for MSVC. Turns out we did, but it didn't seem to work.
This commit sets the stack size in a single place, using
CMAKE_EXE_LINKER_FLAGS because that seems to be the way that works
best.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192912 91177308-0d34-0410-b5e6-96231b3b80d8
Compiling under Visual C++ 2012 with the default stack size of 1MB, the stack
overflows at a depth of 216 template instantiations, well before the 256
default limit. This patch modifies the default MSVC stack size to 2MB.
Patch by Yaron Keren!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192904 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The MSVCRT deliberately sends main() code-page specific characters.
This isn't too useful to LLVM as we end up converting the arguments to
UTF-16 and subsequently attempt to use the result as, for example, a
file name. Instead, we need to have the ability to access the Unicode
command line and transform it to UTF-8.
This has the distinct advantage over using the MSVC-specific wmain()
function as our entry point because:
- It doesn't work on cygwin.
- It only work on MinGW with caveats and only then on certain versions.
- We get to keep our entry point as main(). :)
N.B. This patch includes fixes to other parts of lib/Support/Windows
s.t. we would be able to take advantage of getting the Unicode paths.
E.G. clang spawning clang -cc1 would want to give it Unicode arguments.
Reviewers: aaron.ballman, Bigcheese, rnk, ruiu
Reviewed By: rnk
CC: llvm-commits, ygao
Differential Revision: http://llvm-reviews.chandlerc.com/D1834
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@192069 91177308-0d34-0410-b5e6-96231b3b80d8
I got a report of a hang in git's helper functions trying to figure out
how to display results of "git svn info" when run inside ninja, even though
the result is immediately piped to grep. This seems to avoid that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190808 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the logic to work with Git, and also uses the variable names
to match what Clang is actually looking for.
This changes the interface of GetSVN.cmake. Clang change to follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190556 91177308-0d34-0410-b5e6-96231b3b80d8
It was removed in r189130, but it turns out this makes life hard for
folks packaging LLVM and Clang and building the latter based on the
LLVM package.
Note that this only adds back the LLVM tblgen, and it's obviously
not included when LLVM_INSTALL_TOOLCHAIN_ONLY is set.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190419 91177308-0d34-0410-b5e6-96231b3b80d8
LibXML2 config doesn't specify lzma as a dependency, which breaks
cross-compilation builds using new linkers (ld 2.21 or higher).
There is a bug on libxml2 to fix that, but since it's going to take
a while for things to go round and back, so we should have a harmless
addition of the library until then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190409 91177308-0d34-0410-b5e6-96231b3b80d8
