for a wider range of GOT entries that can hold thread-relative offsets.
This matches the behavior of GCC, which was not documented in the PPC64 TLS
ABI. The ABI will be updated with the new code sequence.
Former sequence:
ld 9,x@got@tprel(2)
add 9,9,x@tls
New sequence:
addis 9,2,x@got@tprel@ha
ld 9,x@got@tprel@l(9)
add 9,9,x@tls
Note that a linker optimization exists to transform the new sequence into
the shorter sequence when appropriate, by replacing the addis with a nop
and modifying the base register and relocation type of the ld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170209 91177308-0d34-0410-b5e6-96231b3b80d8
Provides m_Argument that allows matching against a CallSite's specified argument. Provides m_Intrinsic pattern that can be templatized over the intrinsic id and bind/match arguments similarly to other pattern matchers. Implementations provided for 0 to 4 arguments, though it's very simple to extend for more. Also provides example template specialization for bswap (m_BSwap) and example of code cleanup for its use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170091 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC target. This is the last of the four models, so we now have
full TLS support.
This is mostly a straightforward extension of the general dynamic model.
I had to use an additional Chain operand to tie ADDIS_DTPREL_HA to the
register copy following ADDI_TLSLD_L; otherwise everything above the
ADDIS_DTPREL_HA appeared dead and was removed.
As before, there are new test cases to test the assembly generation, and
the relocations output during integrated assembly. The expected code
gen sequence can be read in test/CodeGen/PowerPC/tls-ld.ll.
There are a couple of things I think can be done more efficiently in the
overall TLS code, so there will likely be a clean-up patch forthcoming;
but for now I want to be sure the functionality is in place.
Bill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170003 91177308-0d34-0410-b5e6-96231b3b80d8
m_ConstantFP - match and bind a float constant
m_SpecificConstantFP - match a specific floating point value or vector of floats of that value
m_FPOne - match a floating point 1.0 or vector of 1.0s
m_NegZero - match -0.0
m_AnyZero - match 0 or -0.0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169939 91177308-0d34-0410-b5e6-96231b3b80d8
Given a thread-local symbol x with global-dynamic access, the generated
code to obtain x's address is:
Instruction Relocation Symbol
addis ra,r2,x@got@tlsgd@ha R_PPC64_GOT_TLSGD16_HA x
addi r3,ra,x@got@tlsgd@l R_PPC64_GOT_TLSGD16_L x
bl __tls_get_addr(x@tlsgd) R_PPC64_TLSGD x
R_PPC64_REL24 __tls_get_addr
nop
<use address in r3>
The implementation borrows from the medium code model work for introducing
special forms of ADDIS and ADDI into the DAG representation. This is made
slightly more complicated by having to introduce a call to the external
function __tls_get_addr. Using the full call machinery is overkill and,
more importantly, makes it difficult to add a special relocation. So I've
introduced another opcode GET_TLS_ADDR to represent the function call, and
surrounded it with register copies to set up the parameter and return value.
Most of the code is pretty straightforward. I ran into one peculiarity
when I introduced a new PPC opcode BL8_NOP_ELF_TLSGD, which is just like
BL8_NOP_ELF except that it takes another parameter to represent the symbol
("x" above) that requires a relocation on the call. Something in the
TblGen machinery causes BL8_NOP_ELF and BL8_NOP_ELF_TLSGD to be treated
identically during the emit phase, so this second operand was never
visited to generate relocations. This is the reason for the slightly
messy workaround in PPCMCCodeEmitter.cpp:getDirectBrEncoding().
Two new tests are included to demonstrate correct external assembly and
correct generation of relocations using the integrated assembler.
Comments welcome!
Thanks,
Bill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169910 91177308-0d34-0410-b5e6-96231b3b80d8
Change member types of RuntimeFunction and UnwindInfo from uint64_t to
uint32_t:
These members represent addresses. According to MSDN, they are image
relative, that is, they are 32-bit offsets from the starting address
of the image that contains the function table entry.
See MSDN for more information:
RUNTIME_FUNCTION: http://msdn.microsoft.com/en-us/library/ft9x1kdx.aspx
UNWIND_INFO: http://msdn.microsoft.com/en-us/library/ddssxxy8.aspx
Make Win64.h platform-neutral:
The standard types unit8_t, uint16_t and uint32_t are replaced with
their counterparts from Endian.h. Accessor functions are introduced to
replace bit fields.
Patch by João Matos and Kai Nacke.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169414 91177308-0d34-0410-b5e6-96231b3b80d8
on 64-bit PowerPC ELF.
The patch includes code to handle external assembly and MC output with the
integrated assembler. It intentionally does not support the "old" JIT.
For the initial-exec TLS model, the ABI requires the following to calculate
the address of external thread-local variable x:
Code sequence Relocation Symbol
ld 9,x@got@tprel(2) R_PPC64_GOT_TPREL16_DS x
add 9,9,x@tls R_PPC64_TLS x
The register 9 is arbitrary here. The linker will replace x@got@tprel
with the offset relative to the thread pointer to the generated GOT
entry for symbol x. It will replace x@tls with the thread-pointer
register (13).
The two test cases verify correct assembly output and relocation output
as just described.
PowerPC-specific selection node variants are added for the two
instructions above: LD_GOT_TPREL and ADD_TLS. These are inserted
when an initial-exec global variable is encountered by
PPCTargetLowering::LowerGlobalTLSAddress(), and later lowered to
machine instructions LDgotTPREL and ADD8TLS. LDgotTPREL is a pseudo
that uses the same LDrs support added for medium code model's LDtocL,
with a different relocation type.
The rest of the processing is straightforward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169281 91177308-0d34-0410-b5e6-96231b3b80d8
AKA: Recompile *ALL* the source code!
This one went much better. No manual edits here. I spot-checked for
silliness and grep-checked for really broken edits and everything seemed
good. It all still compiles. Yell if you see something that looks goofy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169133 91177308-0d34-0410-b5e6-96231b3b80d8
Rationale:
1) This was the name in the comment block. ;]
2) It matches Clang's __has_feature naming convention.
3) It matches other compiler-feature-test conventions.
Sorry for the noise. =]
I've also switch the comment block to use a \brief tag and not duplicate
the name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168996 91177308-0d34-0410-b5e6-96231b3b80d8
references from whether it supports an R-value reference *this. No
version of GCC today supports the latter, which breaks GCC C++11
compiles of LLVM and Clang now.
Also add doxygen comments clarifying what's going on here, and update
the usage in Optional. I'll update the usages in Clang next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168993 91177308-0d34-0410-b5e6-96231b3b80d8
depends on the IR infrastructure, there is no sense in it being off in
Support land.
This is in preparation to start working to expand InstVisitor into more
special-purpose visitors that are still generic and can be re-used
across different passes. The expansion will go into the Analylis tree
though as nothing in VMCore needs it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168972 91177308-0d34-0410-b5e6-96231b3b80d8
This expands to '&', and is intended to be used when an /optional/ rvalue
override is available.
Before:
void foo() const { ... }
After:
void foo() const LLVM_LVALUE_FUNCTION { ... }
void foo() && { ... }
This is used to allow moving the contents of an Optional.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168963 91177308-0d34-0410-b5e6-96231b3b80d8
appropriate unit tests. This change in itself is not expected to
affect any functionality at this point, but it will serve as a
stepping stone to improve FileCheck's variable matching capabilities.
Luckily, our regex implementation already supports backreferences,
although a bit of hacking is required to enable it. It supports both
Basic Regular Expressions (BREs) and Extended Regular Expressions
(EREs), without supporting backrefs for EREs, following POSIX strictly
in this respect. And EREs is what we actually use (rightly). This is
contrary to many implementations (including the default on Linux) of
POSIX regexes, that do allow backrefs in EREs.
Adding backref support to our EREs is a very simple change in the
regcomp parsing code. I fail to think of significant cases where it
would clash with existing things, and can bring more versatility to
the regexes we write. There's always the danger of a backref in a
specially crafted regex causing exponential matching times, but since
we mainly use them for testing purposes I don't think it's a big
problem. [it can also be placed behind a flag specific to FileCheck,
if needed].
For more details, see:
* http://lists.cs.uiuc.edu/pipermail/llvmdev/2012-November/055840.html
* http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/156878.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168802 91177308-0d34-0410-b5e6-96231b3b80d8
The default for 64-bit PowerPC is small code model, in which TOC entries
must be addressable using a 16-bit offset from the TOC pointer. Additionally,
only TOC entries are addressed via the TOC pointer.
With medium code model, TOC entries and data sections can all be addressed
via the TOC pointer using a 32-bit offset. Cooperation with the linker
allows 16-bit offsets to be used when these are sufficient, reducing the
number of extra instructions that need to be executed. Medium code model
also does not generate explicit TOC entries in ".section toc" for variables
that are wholly internal to the compilation unit.
Consider a load of an external 4-byte integer. With small code model, the
compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
With medium model, it instead generates:
addis 3, 2, .LC1@toc@ha
ld 3, .LC1@toc@l(3)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc ei[TC],ei
Here .LC1@toc@ha is a relocation requesting the upper 16 bits of the
32-bit offset of ei's TOC entry from the TOC base pointer. Similarly,
.LC1@toc@l is a relocation requesting the lower 16 bits. Note that if
the linker determines that ei's TOC entry is within a 16-bit offset of
the TOC base pointer, it will replace the "addis" with a "nop", and
replace the "ld" with the identical "ld" instruction from the small
code model example.
Consider next a load of a function-scope static integer. For small code
model, the compiler generates:
ld 3, .LC1@toc(2)
lwz 4, 0(3)
.section .toc,"aw",@progbits
.LC1:
.tc test_fn_static.si[TC],test_fn_static.si
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
For medium code model, the compiler generates:
addis 3, 2, test_fn_static.si@toc@ha
addi 3, 3, test_fn_static.si@toc@l
lwz 4, 0(3)
.type test_fn_static.si,@object
.local test_fn_static.si
.comm test_fn_static.si,4,4
Again, the linker may replace the "addis" with a "nop", calculating only
a 16-bit offset when this is sufficient.
Note that it would be more efficient for the compiler to generate:
addis 3, 2, test_fn_static.si@toc@ha
lwz 4, test_fn_static.si@toc@l(3)
The current patch does not perform this optimization yet. This will be
addressed as a peephole optimization in a later patch.
For the moment, the default code model for 64-bit PowerPC will remain the
small code model. We plan to eventually change the default to medium code
model, which matches current upstream GCC behavior. Note that the different
code models are ABI-compatible, so code compiled with different models will
be linked and execute correctly.
I've tested the regression suite and the application/benchmark test suite in
two ways: Once with the patch as submitted here, and once with additional
logic to force medium code model as the default. The tests all compile
cleanly, with one exception. The mandel-2 application test fails due to an
unrelated ABI compatibility with passing complex numbers. It just so happens
that small code model was incredibly lucky, in that temporary values in
floating-point registers held the expected values needed by the external
library routine that was called incorrectly. My current thought is to correct
the ABI problems with _Complex before making medium code model the default,
to avoid introducing this "regression."
Here are a few comments on how the patch works, since the selection code
can be difficult to follow:
The existing logic for small code model defines three pseudo-instructions:
LDtoc for most uses, LDtocJTI for jump table addresses, and LDtocCPT for
constant pool addresses. These are expanded by SelectCodeCommon(). The
pseudo-instruction approach doesn't work for medium code model, because
we need to generate two instructions when we match the same pattern.
Instead, new logic in PPCDAGToDAGISel::Select() intercepts the TOC_ENTRY
node for medium code model, and generates an ADDIStocHA followed by either
a LDtocL or an ADDItocL. These new node types correspond naturally to
the sequences described above.
The addis/ld sequence is generated for the following cases:
* Jump table addresses
* Function addresses
* External global variables
* Tentative definitions of global variables (common linkage)
The addis/addi sequence is generated for the following cases:
* Constant pool entries
* File-scope static global variables
* Function-scope static variables
Expanding to the two-instruction sequences at select time exposes the
instructions to subsequent optimization, particularly scheduling.
The rest of the processing occurs at assembly time, in
PPCAsmPrinter::EmitInstruction. Each of the instructions is converted to
a "real" PowerPC instruction. When a TOC entry needs to be created, this
is done here in the same manner as for the existing LDtoc, LDtocJTI, and
LDtocCPT pseudo-instructions (I factored out a new routine to handle this).
I had originally thought that if a TOC entry was needed for LDtocL or
ADDItocL, it would already have been generated for the previous ADDIStocHA.
However, at higher optimization levels, the ADDIStocHA may appear in a
different block, which may be assembled textually following the block
containing the LDtocL or ADDItocL. So it is necessary to include the
possibility of creating a new TOC entry for those two instructions.
Note that for LDtocL, we generate a new form of LD called LDrs. This
allows specifying the @toc@l relocation for the offset field of the LD
instruction (i.e., the offset is replaced by a SymbolLo relocation).
When the peephole optimization described above is added, we will need
to do similar things for all immediate-form load and store operations.
The seven "mcm-n.ll" test cases are kept separate because otherwise the
intermingling of various TOC entries and so forth makes the tests fragile
and hard to understand.
The above assumes use of an external assembler. For use of the
integrated assembler, new relocations are added and used by
PPCELFObjectWriter. Testing is done with "mcm-obj.ll", which tests for
proper generation of the various relocations for the same sequences
tested with the external assembler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168708 91177308-0d34-0410-b5e6-96231b3b80d8
The rationale is to get YAML filenames in diagnostics from
yaml::Stream::printError -- currently the filename is hard-coded as
"YAML" because there's no buffer information available.
Patch by Kim Gräsman!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168341 91177308-0d34-0410-b5e6-96231b3b80d8
values in a map that can be passed to consumers. Add a testcase that
ensures this works for llvm-dwarfdump.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167558 91177308-0d34-0410-b5e6-96231b3b80d8
is that the unit test doesn't have IntTy equal to APInt, instead it uses a class
derived from APInt. When, as in these lines, an IntTy& reference is returned
but is assigned to an APInt&, the compiler destroys the temporary the IntTy& was
referring to, leaving the APInt& referring to garbage. This causes the unittest
to fail systematically on my machine; it can also be caught by running the test
under valgrind.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167356 91177308-0d34-0410-b5e6-96231b3b80d8
isa<> et al. automatically infer when the cast is an upcast (including a
self-cast), so these are no longer necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165767 91177308-0d34-0410-b5e6-96231b3b80d8
Additionally, all such cases are handled with no dynamic check.
All `classof()` of the form
class Foo {
[...]
static bool classof(const Bar *) { return true; }
[...]
}
where Foo is an ancestor of Bar are no longer necessary.
Don't write them!
Note: The exact test is `is_base_of<Foo, Bar>`, which is non-strict, so
that Foo is considered an ancestor of itself.
This leads to the following rule of thumb for LLVM-style RTTI:
The argument type of `classof()` should be a strict ancestor.
For more information about implementing LLVM-style RTTI, see
docs/HowToSetUpLLVMStyleRTTI.rst
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@165765 91177308-0d34-0410-b5e6-96231b3b80d8
folders and not having it here fails to compile if you actually try to use it.
Also, CreatePointerCast was failing to do the part where it does TD-aware
constant folding. Granted there is exactly one case where that it will ever
do anything, but there's no reason to skip it. For reference, that case is a
subtraction between two constant offsets on the same global variable, eg.,
"&A[123] - &A[4].f".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164760 91177308-0d34-0410-b5e6-96231b3b80d8
