Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reinstates commits r215111, 215115, 215116, 215117, 215136.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216982 91177308-0d34-0410-b5e6-96231b3b80d8
This removes static initializers from the backends which generate this data, and also makes this struct match the other Tablegen generated structs in behaviour
Reviewed by Andy Trick and Chandler C
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216919 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new property: isInsertSubreg and the related target hooks:
TargetIntrInfo::getInsertSubregInputs and
TargetInstrInfo::getInsertSubregLikeInputs to specify that a target specific
instruction is a (kind of) INSERT_SUBREG.
The approach is similar to r215394.
<rdar://problem/12702965>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216139 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new property: isExtractSubreg and the related target hooks:
TargetIntrInfo::getExtractSubregInputs and
TargetInstrInfo::getExtractSubregLikeInputs to specify that a target specific
instruction is a (kind of) EXTRACT_SUBREG.
The approach is similar to r215394.
<rdar://problem/12702965>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216130 91177308-0d34-0410-b5e6-96231b3b80d8
Implement `uselistorder` and `uselistorder_bb` assembly directives,
which allow the use-list order to be recovered when round-tripping to
assembly.
This is the bulk of PR20515.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216025 91177308-0d34-0410-b5e6-96231b3b80d8
ARM in particular is getting dangerously close to exceeding 32 bits worth of
possible subtarget features. When this happens, various parts of MC start to
fail inexplicably as masks get truncated to "unsigned".
Mostly just refactoring at present, and there's probably no way to test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215887 91177308-0d34-0410-b5e6-96231b3b80d8
I'm using this to try to find more minimal test cases by re-fuzzing
within a specific domain once errors are found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215823 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch changes the way xfail and unsupported tests are displayed.
This output is only displayed when the --show-unsupported/--show-xfail flags are passed to lit.
Currently xfail/unsupported tests are printed during the run of the test-suite. I think its better to display this information during the summary instead.
This patch removes the printing of these tests from when they are run to the summary.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4842
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215809 91177308-0d34-0410-b5e6-96231b3b80d8
Add header guards to files that were missing guards. Remove #endif comments
as they don't seem common in LLVM (we can easily add them back if we decide
they're useful)
Changes made by clang-tidy with minor tweaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215558 91177308-0d34-0410-b5e6-96231b3b80d8
Especially with blends and large tree heights there was a problem with
the fuzzer where it would end up with enough undef shuffle elements in
enough parts of the tree that in a birthday-attack kind of way we ended
up regularly having large numbers of undef elements in the result. I was
seeing reasonably frequent cases of *all* results being undef which
prevents us from doing any correctness checking at all. While having
undef lanes is important, this was too much.
So I've tried to apply some math to the probabilities of having an undef
lane and balance them against the tree height. Please be gentle, I'm
really terrible at math. I probably made a bunch of amateur mistakes
here. Fixes, etc. are quite welcome. =D At least in running it some, it
seems to be producing more interesting (for correctness testing)
results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215540 91177308-0d34-0410-b5e6-96231b3b80d8
a tree of inputs to blend iteratively together.
This required a pretty substantial rewrite of the innards. The number of
shuffle instructions is now bounded in terms of tree-height. There is
a flag to disable blends so that its still possible to test single input
shuffles. I've also improved various aspects of how the test program is
generated, primarily to simplify the test harness and allow some
optimizations to clean up how we actually check the results and build up
the inputs.
Again, apologies for my likely horrible use of Python... But hey, it
works! (Ish?)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215530 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new property: isRegSequence and the related target hooks:
TargetIntrInfo::getRegSequenceInputs and
TargetInstrInfo::getRegSequenceLikeInputs to specify that a target specific
instruction is a (kind of) REG_SEQUENCE.
<rdar://problem/12702965>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215394 91177308-0d34-0410-b5e6-96231b3b80d8
be deleted. This will be reapplied as soon as possible and before
the 3.6 branch date at any rate.
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reverts commits r215111, 215115, 215116, 215117, 215136.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215154 91177308-0d34-0410-b5e6-96231b3b80d8
Currently FileCheck errors out on empty input. This is usually the
right thing to do, but makes testing things like "this command does
not emit some error message" hard to test. This usually leads to
people using "command 2>&1 | count 0" instead, and then the bots that
use guard malloc fail a few hours later.
By adding a flag to FileCheck that allows empty inputs, we can make
tests that consist entirely of "CHECK-NOT" lines feasible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215127 91177308-0d34-0410-b5e6-96231b3b80d8
I am sure we will be finding bits and pieces of dead code for years to
come, but this is a good start.
Thanks to Lang Hames for making MCJIT a good replacement!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215111 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful in a later patch where binary literals such as 0b000 will become BitsInit values instead of IntInit values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215085 91177308-0d34-0410-b5e6-96231b3b80d8
within a single bit-width of vectors. This is particularly useful for
when you know you have bugs in a certain area and want to find simpler
test cases than those produced by an open-ended fuzzing that ends up
legalizing the vector in addition to shuffling it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215056 91177308-0d34-0410-b5e6-96231b3b80d8
This is a python script which for a given seed generates a random
sequence of random shuffles of a random vector width. It embeds this
into a function and emits a main function which calls the test routine
and checks that the results (where defined) match the obvious results.
I'll be using this to drive out miscompiles from the new vector shuffle
logic now that it is clean of any crashes I can find with llvm-stress.
Note, my python skills are very poor. Sorry if this is terrible code,
and feel free to tell me how I should write this or just patch it as
necessary.
The tests generated try to be very portable and use boring C routines.
It technically will mis-declare the C routines and pass 32-bit integers
to parametrs that expect 64-bit integers. If someone wants to fix this
and has less terrible ideas of how to do it, I'm all ears. Fortunately,
this "just works" for x86. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215054 91177308-0d34-0410-b5e6-96231b3b80d8
to get the subtarget and that's accessible from the MachineFunction
now. This helps clear the way for smaller changes where we getting
a subtarget will require passing in a MachineFunction/Function as
well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214988 91177308-0d34-0410-b5e6-96231b3b80d8
This is something that I have found to be very useful in my work and I
wanted to contribute it back to the community since several people in
the past have asked me for something along these lines. (Jakob, I know
this has been a while coming ; )]
The way you use this is you create a script that takes in as its first
argument a count. The script passes into LLVM the count via a command
line flag that disables a pass after LLVM has run after the pass has
run for count number of times. Then the script invokes a test of some
sort and indicates whether LLVM successfully compiled the test via the
scripts exit status. Then you invoke bisect as follows:
bisect --start=<start_num> --end=<end_num> ./script.sh "%(count)s"
And bisect will continually call ./script.sh with various counts using
the exit status to determine success and failure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214610 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch add a --show-xfail flag. If this flag is specified then each xfail test will be printed to output.
When it is not given xfail tests are ignored. Ignoring xfail tests is the current behavior.
This flag is meant to mirror the --show-unsupported flag that was recently added.
Reviewers: ddunbar, EricWF
Reviewed By: EricWF
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4750
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214609 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of moving out the data in a ErrorOr<std::unique_ptr<Foo>>, get
a reference to it.
Thanks to David Blaikie for the suggestion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214516 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful for cases when stand-alone patterns are preferred to the
patterns included in the instruction definitions. Instead of requiring
that stand-alone patterns set a larger AddedComplexity value, which
can be confusing to new developers, the allows us to reduce the
complexity of the included patterns to achieve the same result.
There will be test cases for this added to the R600 backend in a
future commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214466 91177308-0d34-0410-b5e6-96231b3b80d8
This allows assembling the two new instructions, encls and enclu for the
SKX processor model.
Note the diffs are a bigger than what might think, but to fit the new
MRM_CF and MRM_D7 in things in the right places things had to be
renumbered and shuffled down causing a bit more diffs.
rdar://16228228
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214460 91177308-0d34-0410-b5e6-96231b3b80d8
