In gcov, the -o flag can accept either a directory or a file name.
When given a directory, the gcda and gcno files are expected to be in
that directory. When given a file, the gcda and gcno files are
expected to be named based on the stem of that file. Non-existent
paths are treated as files.
This implements compatible behaviour.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201555 91177308-0d34-0410-b5e6-96231b3b80d8
Introducing llvm-profdata, a tool for merging profile data generated by
PGO instrumentation in clang.
- The name indicates a file extension of <name>.profdata. Eventually
profile data output by clang should be changed to that extension.
- llvm-profdata merges two profiles. However, the name is more general,
since it will likely pick up more tasks (such as summarizing a single
profile).
- llvm-profdata parses the current text-based format, but will be
updated once we settle on a binary format.
<rdar://problem/15949645>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201535 91177308-0d34-0410-b5e6-96231b3b80d8
Until now, when a path in a gcno file included a directory, we would
emit our .gcov file in that directory, whereas gcov always emits the
file in the current directory. In doing so, this implements gcov's
strange name-mangling -p flag, which is needed to avoid clobbering
files when two with the same name exist in different directories.
The path mangling is a bit ugly and only handles unix-like paths, but
it's simple, and it doesn't make any guesses as to how it should
behave outside of what gcov documents. If we decide this should be
cross platform later, we can consider the compatibility implications
then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200754 91177308-0d34-0410-b5e6-96231b3b80d8
When gcov is run without gcda data, it acts as if the counts are all
zero and labels the file as - to indicate that there was no data. We
should do the same.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200740 91177308-0d34-0410-b5e6-96231b3b80d8
Enhance the ARM specific parsing support in llvm-readobj to support attributes.
This allows for simpler tests to validate encoding of the build attributes as
specified in the ARM ELF specification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200450 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, llvm-cov isn't command-line compatible with gcov, which
accepts a source file name as its first parameter and infers the gcno
and gcda file names from that. This change keeps our -gcda and -gcno
options available for convenience in overriding this behaviour, but
adds the required parameter and inference behaviour as a compatible
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200417 91177308-0d34-0410-b5e6-96231b3b80d8
editbin.exe and link.exe both accepts /highentropyva option to set this bit, so
doing s/VIRTUAL_ADDRESS/VA/ should make sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200191 91177308-0d34-0410-b5e6-96231b3b80d8
That bit is not documented in the PE/COFF spec published by Microsoft, so we
don't know the official name of it. I named this bit
IMAGE_DLL_CHARACTERISTICS_HIGH_ENTROPY_VIRTUAL_ADDRESS because the bit is
reported as "high entropy virtual address" by dumpbin.exe,
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200121 91177308-0d34-0410-b5e6-96231b3b80d8
PE32+ supports 64 bit address space, but the file format remains 32 bit.
So its file format is pretty similar to PE32 (32 bit executable). The
differences compared to PE32 are (1) the lack of "BaseOfData" field and
(2) some of its data members are 64 bit.
In this patch, I added a new member function to get a PE32+ Header object to
COFFObjectFile class and made llvm-readobj to use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200117 91177308-0d34-0410-b5e6-96231b3b80d8
Add support to llvm-readobj to decode the actual opcodes. The ARM EHABI opcodes
are a variable length instruction set that describe the operations required for
properly unwinding stack frames.
The primary motivation for this change is to ease the creation of tests for the
ARM EHABI object emission as well as the unwinding directive handling in the ARM
IAS.
Thanks to Logan Chien for an extra test case!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199708 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the capability to dump export table contents. An example
output is this:
Export Table:
Ordinal RVA Name
5 0x2008 exportfn1
6 0x2010 exportfn2
By adding this feature to llvm-objdump, we will be able to use it to check
export table contents in LLD's tests. Currently we are doing binary
comparison in the tests, which is fragile and not readable to humans.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199358 91177308-0d34-0410-b5e6-96231b3b80d8
Rename bytecode to opcodes to make it more clear. Change an impossible case to
llvm_unreachable instead. Avoid allocation of a buffer by modifying the
PrintOpcodes iteration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198848 91177308-0d34-0410-b5e6-96231b3b80d8
Appease the buildbots for targets which do not build the ARM support by moving
the ARM specific test into a subdirectory and use the lit configuration to
disable them appropriately.
Thanks to chapuni and thakis for explaining how to do this!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198736 91177308-0d34-0410-b5e6-96231b3b80d8
This adds some preliminary support for decoding ARM EHABI unwinding information.
The major functionality that remains from complete support is bytecode
translation.
Each Unwind Index Table is printed out as a separate entity along with its
section index, name, offset, and entries.
Each entry lists the function address, and if possible, the name, of the
function to which it corresponds. The encoding model, personality routine or
index, and byte code is also listed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198734 91177308-0d34-0410-b5e6-96231b3b80d8
Rationale: going to land D2425 shortly.
I'll re-land these COFF files along with D2425 to simplify the SVN history
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197673 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to the file summaries, the function summaries output line,
branching and call statistics. The file summaries have been moved
outside the initial loop so that all of the function summaries can be
outputted before file summaries.
Also updated test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197633 91177308-0d34-0410-b5e6-96231b3b80d8
File summaries will now be optionally outputted which will give line,
branching and call coverage info. Unfortunately, clang's current
instrumentation does not give enough information to deduce function
calls, something that gcc is able to do. Thus, no calls are always
outputted to be consistent with gcov output.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197606 91177308-0d34-0410-b5e6-96231b3b80d8
This will cause llvm-cov to output branch counts instead of branch
probabilities. -b must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197594 91177308-0d34-0410-b5e6-96231b3b80d8
Outputs branch information for unconditional branches in addition to
conditional branches. -b option must be enabled.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197432 91177308-0d34-0410-b5e6-96231b3b80d8
This option tells llvm-cov to print out branch probabilities when
a basic block contains multiple branches. It also prints out some
function summary info including the number of times the function enters,
the percent of time it returns, and how many blocks were executed.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197198 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to gcov, llvm-cov will now print out the block count at the end
of each block. Multiple blocks can end on the same line.
One computational difference is by using -a, llvm-cov will no longer
simply add the block counts together to form a line count. Instead, it
will take the maximum of the block counts on that line. This has a
similar effect to what gcov does, but generates more correct counts in
certain scenarios.
Also updated tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196856 91177308-0d34-0410-b5e6-96231b3b80d8
This currently breaks clang/test/CodeGen/code-coverage.c. The root cause
is that the newly introduced access to Funcs[j] is out of bounds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196365 91177308-0d34-0410-b5e6-96231b3b80d8
Copy all test files to temporary directory, not just test.* files. Tests
didn't fail because the missing files occurred in XFAILS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196305 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that in some build systems, tests are executed in a
non-writable directory. Hopefully, this finally fixes the issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196256 91177308-0d34-0410-b5e6-96231b3b80d8
With r196184, llvm-cov creates a new file right next to the input file.
However, the Inputs-directory can't simply be assumed to be writable
under all build systems.
Also, this prevents a new source file from showing up in the source tree
if the test aborts before the call to "rm".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196228 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of asking the user to specify a single file to output coverage
info and defaulting to STDOUT, llvm-cov now creates files for each
source file with a naming system of: <source filename> + ".llcov".
This is what gcov does and although it can clutter the working directory
with numerous coverage files, it will be easier to hook the llvm-cov
output to tools which operate on this assumption (such as lcov).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196184 91177308-0d34-0410-b5e6-96231b3b80d8
XFAIL llvm-cov.test for MIPS until big-endian issues are fixed for llvm-cov.
The test does pass on MIPS little-endian.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195966 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of permanently outputting "MVLL" as the file checksum, clang
will create gcno and gcda checksums by hashing the destination block
numbers of every arc. This allows for llvm-cov to check if the two gcov
files are synchronized.
Regenerated the test files so they contain the checksum. Also added
negative test to ensure error when the checksums don't match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195191 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Some machine-type-neutral object files containing only undefined symbols
actually do exist in the Windows standard library. Need to recognize them
as COFF files.
Reviewers: Bigcheese
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2164
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194734 91177308-0d34-0410-b5e6-96231b3b80d8
According to the hazy gcov documentation, it appeared to be technically
possible for lines within a block to belong to different source files.
However, upon further investigation, gcov does not actually support
multiple source files for a single block.
This change removes a level of separation between blocks and lines by
replacing the StringMap of GCOVLines with a SmallVector of ints
representing line numbers. This also means that the GCOVLines class is
no longer needed.
This paves the way for supporting the "-a" option, which will output
block information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194637 91177308-0d34-0410-b5e6-96231b3b80d8
