LazyCallGraph analysis framework. Wire it up all the way through the opt
driver and add some very basic testing that we can build pass pipelines
including these components. Still a lot more to do in terms of testing
that all of this works, but the basic pieces are here.
There is a *lot* of boiler plate here. It's something I'm going to
actively look at reducing, but I don't have any immediate ideas that
don't end up making the code terribly complex in order to fold away the
boilerplate. Until I figure out something to minimize the boilerplate,
almost all of this is based on the code for the existing pass managers,
copied and heavily adjusted to suit the needs of the CGSCC pass
management layer.
The actual CG management still has a bunch of FIXMEs in it. Notably, we
don't do *any* updating of the CG as it is potentially invalidated.
I wanted to get this in place to motivate the new analysis, and add
update APIs to the analysis and the pass management layers in concert to
make sure that the *right* APIs are present.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206745 91177308-0d34-0410-b5e6-96231b3b80d8
file. This will make it easy to scale up the number of passes supported.
Currently, it just supports the function and module transformation
passes that were already supported in the opt tool explicitly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206737 91177308-0d34-0410-b5e6-96231b3b80d8
it is available. Also make the move semantics sufficiently correct to
tolerate move-only passes, as the PassManagers *are* move-only passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203391 91177308-0d34-0410-b5e6-96231b3b80d8
The primary motivation for this pass is to separate the call graph
analysis used by the new pass manager's CGSCC pass management from the
existing call graph analysis pass. That analysis pass is (somewhat
unfortunately) over-constrained by the existing CallGraphSCCPassManager
requirements. Those requirements make it *really* hard to cleanly layer
the needed functionality for the new pass manager on top of the existing
analysis.
However, there are also a bunch of things that the pass manager would
specifically benefit from doing differently from the existing call graph
analysis, and this new implementation tries to address several of them:
- Be lazy about scanning function definitions. The existing pass eagerly
scans the entire module to build the initial graph. This new pass is
significantly more lazy, and I plan to push this even further to
maximize locality during CGSCC walks.
- Don't use a single synthetic node to partition functions with an
indirect call from functions whose address is taken. This node creates
a huge choke-point which would preclude good parallelization across
the fanout of the SCC graph when we got to the point of looking at
such changes to LLVM.
- Use a memory dense and lightweight representation of the call graph
rather than value handles and tracking call instructions. This will
require explicit update calls instead of some updates working
transparently, but should end up being significantly more efficient.
The explicit update calls ended up being needed in many cases for the
existing call graph so we don't really lose anything.
- Doesn't explicitly model SCCs and thus doesn't provide an "identity"
for an SCC which is stable across updates. This is essential for the
new pass manager to work correctly.
- Only form the graph necessary for traversing all of the functions in
an SCC friendly order. This is a much simpler graph structure and
should be more memory dense. It does limit the ways in which it is
appropriate to use this analysis. I wish I had a better name than
"call graph". I've commented extensively this aspect.
This is still very much a WIP, in fact it is really just the initial
bits. But it is about the fourth version of the initial bits that I've
implemented with each of the others running into really frustrating
problms. This looks like it will actually work and I'd like to split the
actual complexity across commits for the sake of my reviewers. =] The
rest of the implementation along with lots of wiring will follow
somewhat more rapidly now that there is a good path forward.
Naturally, this doesn't impact any of the existing optimizer. This code
is specific to the new pass manager.
A bunch of thanks are deserved for the various folks that have helped
with the design of this, especially Nick Lewycky who actually sat with
me to go through the fundamentals of the final version here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200903 91177308-0d34-0410-b5e6-96231b3b80d8
various opt verifier commandline options.
Mostly mechanical wiring of the verifier to the new pass manager.
Exercises one of the more unusual aspects of it -- a pass can be either
a module or function pass interchangably. If this is ever problematic,
we can make things more constrained, but for things like the verifier
where there is an "obvious" applicability at both levels, it seems
convenient.
This is the next-to-last piece of basic functionality left to make the
opt commandline driving of the new pass manager minimally functional for
testing and further development. There is still a lot to be done there
(notably the factoring into .def files to kill the current boilerplate
code) but it is relatively uninteresting. The only interesting bit left
for minimal functionality is supporting the registration of analyses.
I'm planning on doing that on top of the .def file switch mostly because
the boilerplate for the analyses would be significantly worse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199646 91177308-0d34-0410-b5e6-96231b3b80d8
This implements the legacy passes in terms of the new ones. It adds
basic testing using explicit runs of the passes. Next up will be wiring
the basic output mechanism of opt up when the new pass manager is
engaged unless bitcode writing is requested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199049 91177308-0d34-0410-b5e6-96231b3b80d8
nests to the opt commandline support. This also showcases the
implicit-initial-manager support which will be most useful for testing.
There are several bugs that I spotted by inspection here that I'll fix
with test cases in subsequent commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199038 91177308-0d34-0410-b5e6-96231b3b80d8
mode that can be used to debug the execution of everything.
No support for analyses here, that will come later. This already helps
show parts of the opt commandline integration that isn't working. Tests
of that will start using it as the bugs are fixed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199004 91177308-0d34-0410-b5e6-96231b3b80d8
manager. I cannot emphasize enough that this is a WIP. =] I expect it
to change a great deal as things stabilize, but I think its really
important to get *some* functionality here so that the infrastructure
can be tested more traditionally from the commandline.
The current design is looking something like this:
./bin/opt -passes='module(pass_a,pass_b,function(pass_c,pass_d))'
So rather than custom-parsed flags, there is a single flag with a string
argument that is parsed into the pass pipeline structure. This makes it
really easy to have nice structural properties that are very explicit.
There is one obvious and important shortcut. You can start off the
pipeline with a pass, and the minimal context of pass managers will be
built around the entire specified pipeline. This makes the common case
for tests super easy:
./bin/opt -passes=instcombine,sroa,gvn
But this won't introduce any of the complexity of the fully inferred old
system -- we only ever do this for the *entire* argument, and we only
look at the first pass. If the other passes don't fit in the pass
manager selected it is a hard error.
The other interesting aspect here is that I'm not relying on any
registration facilities. Such facilities may be unavoidable for
supporting plugins, but I have alternative ideas for plugins that I'd
like to try first. My plan is essentially to build everything without
registration until we hit an absolute requirement.
Instead of registration of pass names, there will be a library dedicated
to parsing pass names and the pass pipeline strings described above.
Currently, this is directly embedded into opt for simplicity as it is
very early, but I plan to eventually pull this into a library that opt,
bugpoint, and even Clang can depend on. It should end up as a good home
for things like the existing PassManagerBuilder as well.
There are a bunch of FIXMEs in the code for the parts of this that are
just stubbed out to make the patch more incremental. A quick list of
what's coming up directly after this:
- Support for function passes and building the structured nesting.
- Support for printing the pass structure, and FileCheck tests of all of
this code.
- The .def-file based pass name parsing.
- IR priting passes and the corresponding tests.
Some obvious things that I'm not going to do right now, but am
definitely planning on as the pass manager work gets a bit further:
- Pull the parsing into library, including the builders.
- Thread the rest of the target stuff into the new pass manager.
- Wire support for the new pass manager up to llc.
- Plugin support.
Some things that I'd like to have, but are significantly lower on my
priority list. I'll get to these eventually, but they may also be places
where others want to contribute:
- Adding nice error reporting for broken pass pipeline descriptions.
- Typo-correction for pass names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198998 91177308-0d34-0410-b5e6-96231b3b80d8
