Summary:
Generally speaking, mips-* vs mips64-* should not be used to make decisions
about the content or format of the ELF. This should be based on the ABI
and CPU in use. For example, `mips-linux-gnu-clang -mips64r2 -mabi=64`
should produce an ELF64 as should `mips64-linux-gnu-clang -mabi=64`.
Conversely, `mips64-linux-gnu-clang -mabi=n32` should produce an ELF32 as
should `mips-linux-gnu-clang -mips64r2 -mabi=n32`.
This patch fixes the e_flags but leaves the ELF32 vs ELF64 issue for now
since there is no apparent way to base this decision on the ABI and CPU.
Differential Revision: http://reviews.llvm.org/D4539
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213244 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The cpr1_size field describes the minimum register width to run the program
rather than the size of the registers on the target. MIPS32r6 was acting
as if -mfp64 has been given because it starts off with 64-bit FPU registers.
Differential Revision: http://reviews.llvm.org/D4538
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213243 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These options are not implemented yet but we act as if they are always
given.
The integrated assembler is driven by the clang driver so the e_flag test
cases should match the e_flags emitted by GCC+GAS rather than GAS
by itself.
Differential Revision: http://reviews.llvm.org/D4536
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213242 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
.bss, .text, and .data are at least 16-byte aligned.
.reginfo is 4-byte aligned and has a 24-byte EntrySize.
.MIPS.abiflags has an 24-byte EntrySize.
.MIPS.options is 8-byte aligned and has 1-byte EntrySize.
Using a 1-byte EntrySize for .MIPS.options seems strange because the
records are neither 1-byte long nor fixed-length but this matches the value
that GAS emits.
Differential Revision: http://reviews.llvm.org/D4487
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212939 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When -mno-odd-spreg is in effect, 32-bit floating point values are not
permitted in odd FPU registers. The option also prohibits 32-bit and 64-bit
floating point comparison results from being written to odd registers.
This option has three purposes:
* It allows support for certain MIPS implementations such as loongson-3a that
do not allow the use of odd registers for single precision arithmetic.
* When using -mfpxx, -mno-odd-spreg is the default and this allows us to
statically check that code is compliant with the O32 FPXX ABI since mtc1/mfc1
instructions to/from odd registers are guaranteed not to appear for any
reason. Once this has been established, the user can then re-enable
-modd-spreg to regain the use of all 32 single-precision registers.
* When using -mfp64 and -mno-odd-spreg together, an O32 extension named
O32 FP64A is used as the ABI. This is intended to provide almost all
functionality of an FR=1 processor but can also be executed on a FR=0 core
with the assistance of a hardware compatibility mode which emulates FR=0
behaviour on an FR=1 processor.
* Added '.module oddspreg' and '.module nooddspreg' each of which update
the .MIPS.abiflags section appropriately
* Moved setFpABI() call inside emitDirectiveModuleFP() so that the caller
doesn't have to remember to do it.
* MipsABIFlags now calculates the flags1 and flags2 member on demand rather
than trying to maintain them in the same format they will be emitted in.
There is one portion of the -mfp64 and -mno-odd-spreg combination that is not
implemented yet. Moves to/from odd-numbered double-precision registers must not
use mtc1. I will fix this in a follow-up.
Differential Revision: http://reviews.llvm.org/D4383
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212717 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Follow on to r212519 to improve the encapsulation and limit the scope of the enums.
Also merged two very similar parser functions, fixed a bug where ASE's
were not being reported, and marked CPR1's as being 128-bit when MSA is
enabled.
Differential Revision: http://reviews.llvm.org/D4384
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212522 91177308-0d34-0410-b5e6-96231b3b80d8
We have detected a documentation bug in the encoding tables of the released
MIPS64r6 specification that has resulted in the wrong encodings being used for
these instructions in LLVM. This commit corrects them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212330 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This instruction is re-encoded in MIPS32r6/MIPS64r6 without changing the
restrictions. We hadn't implemented it for earlier ISA's so it has been added to those too.
Differential Revision: http://reviews.llvm.org/D4265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211590 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, llvm always emits a DWARF CIE with a version of 1, even when emitting
DWARF 3 or 4, which both support CIE version 3. This patch makes it emit the
newer CIE version when we are emitting DWARF 3 or 4. This will not reduce
compatibility, as we already emit other DWARF3/4 features, and is worth doing as
the DWARF3 spec removed some ambiguities in the interpretation of call frame
information.
It also fixes a minor bug where the "return address" field of the CIE was
encoded as a ULEB128, which is only valid when the CIE version is 3. There are
no test changes for this, because (as far as I can tell) none of the platforms
that we test have a return address register with a DWARF register number >127.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211272 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by David Chisnall
His work was sponsored by: DARPA, AFRL
Some small modifications to the original patch: we now error if
it's not possible to expand an instruction (mips-expansions-bad.s has some
examples). Added some comments to the expansions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211271 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The assembler tries to reuse the destination register for memory operations whenever
it can but it's not possible to do so if the destination register is not a GPR.
Example:
ldc1 $f0, sym
should expand to:
lui $at, %hi(sym)
ldc1 $f0, %lo(sym)($at)
It's entirely wrong to expand to:
lui $f0, %hi(sym)
ldc1 $f0, %lo(sym)($f0)
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D4173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211169 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch doesn't really change the logic behind expandMemInst but it allows
us to assemble .S files that use .set noat with some macros. For example:
.set noat
lw $k0, offset($k1)
Can expand to:
lui $k0, %hi(offset)
addu $k0, $k0, $k1
lw $k0, %lo(offset)($k0)
with no need to access $at.
Reviewers: dsanders, vmedic
Reviewed By: dsanders, vmedic
Differential Revision: http://reviews.llvm.org/D4159
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211165 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added negative test case so that we can be sure we handle erroneous situations
while parsing the .cpsetup directive.
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3681
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211160 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is no change to the restrictions, just the result register is stored
once in the encoding rather than twice. The rt field is zero in
MIPS32r6/MIPS64r6.
Depends on D4119
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4120
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211019 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The linked-load, store-conditional operations have been re-encoded such
that have a 9-bit offset instead of the 16-bit offset they have prior to
MIPS32r6/MIPS64r6.
While implementing this, I noticed that the atomic load/store pseudos always
emit a sign extension using sll and sra. I have improved this to use seb/seh
when they are available (MIPS32r2/MIPS64r2 and above).
Depends on D4118
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211018 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The error message for the invalid.s cases isn't very helpful. It happens because
there is an instruction with a wider immediate that would have matched if the
NotMips32r6 predicate were true. I have some WIP to improve the message but it
affects most error messages for removed/re-encoded instructions on
MIPS32r6/MIPS64r6 and should therefore be a separate commit.
Depens on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4117
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211012 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
cache and pref were added in MIPS-III, and MIPS32 but were re-encoded in
MIPS32r6/MIPS64r6 to use a 9-bit offset rather than the 16-bit offset
available to earlier cores.
Resolved the decoding conflict between pref and lwc3.
Depends on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4116
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210900 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
b(ge|lt)zal have been removed in MIPS32r6/MIPS64r6. However, bal (an alias
for 'bgezal $zero, $offset') still remains with the same encoding it had
prior to MIPS32r6/MIPS64r6.
Updated the MipsNaCLELFStreamer, and MipsLongBranch to correctly handle the
MIPS32r6/MIPS64r6 BAL instruction in addition to the existing BAL_BR pseudo.
No changes were required to the CodeGen test that looks for BAL
(test/CodeGen/Mips/longbranch.ll) since the new instruction has the same
syntax.
Depends on D4113
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4114
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210898 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It's not emitted by the code generator so we only need assembler tests.
Also added missing daddi aliases from dsub mnemonics, and removed a couple
duplicate dsub tests.
Depends on D4112
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4113
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210897 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Also tightened up the acceptable condition operand for these instructions
on MIPS-I to MIPS-III. Support for $fcc[1-7] was added in MIPS-IV. Prior
to that only $fcc0 is acceptable.
We currently don't optimize (BEQZ (NOT $a), $target) and similar. It's
probably best to do this in InstCombine.
Depends on D4111
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4112
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210787 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These instructions are not implemented for any MIPS ISA so we only need
testcases.
Depends on D4110
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4111
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210786 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Folded mips64-fp-indexed-ls.ll into fp-indexed-ls.ll. To do so, the zext's in
mips64-fp-indexed-ls.ll were changed to implicit sign extensions (performed
by getelementptr). This does not affect the purpose of the test.
Depends on D4004
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4110
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210784 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
c.cond.fmt has been replaced by cmp.cond.fmt. Where c.cond.fmt wrote to
dedicated condition registers, cmp.cond.fmt writes 1 or 0 to normal FGR's
(like the GPR comparisons).
mov[fntz] have been replaced by seleqz and selnez. These instructions
conditionally zero a register based on a bool in a GPR. The results can
then be or'd together to act as a select without, for example, requiring a third
register read port.
mov[fntz].[ds] have been replaced with sel.[ds]
MIPS64r6 currently generates unnecessary sign-extensions for most selects.
This is because the result of a SETCC is currently an i32. Bits 32-63 are
undefined in i32 and the behaviour of seleqz/selnez would otherwise depend
on undefined bits. Later, we will fix this by making the result of SETCC an
i64 on MIPS64 targets.
Depends on D3958
Reviewers: jkolek, vmedic, zoran.jovanovic
Reviewed By: vmedic, zoran.jovanovic
Differential Revision: http://reviews.llvm.org/D4003
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210777 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch updates both the assembler and the code generator.
MIPS32r6/MIPS64r6 replaces them with maddf.[ds] and msubf.[ds] which are fused
multiply-add/sub operations. We don't emit these yet, this patch only prevents the removed instructions from being emitted.
Depends on D3955
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3956
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210763 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch disables madd/maddu/msub/msubu in both the assembler and code
generator.
Depends on D3896
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3955
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210762 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The accumulator-based (HI/LO) multiplies and divides from earlier ISA's have
been removed and replaced with GPR-based equivalents. For example:
div $1, $2
mflo $3
is now:
div $3, $1, $2
This patch disables the accumulator-based multiplies and divides for
MIPS32r6/MIPS64r6 and uses the GPR-based equivalents instead.
Renamed expandPseudoDiv to insertDivByZeroTrap to better describe the
behaviour of the function.
MipsDelaySlotFiller now invalidates the liveness information when moving
instructions to the delay slot. Without this, divrem.ll will abort since
%GP ends up used before it is defined.
Reviewers: vmedic, zoran.jovanovic, jkolek
Reviewed By: jkolek
Differential Revision: http://reviews.llvm.org/D3896
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210760 91177308-0d34-0410-b5e6-96231b3b80d8
