This is a minimal implementation which accepts only constants rather than
full expressions, but that should be perfectly sufficient for all known
users for now.
Patch from PaX Team <pageexec@freemail.hu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200614 91177308-0d34-0410-b5e6-96231b3b80d8
This will be needed for .octa support, but we don't want to just use the
existing AsmLexer::Integer for it and then have to litter all its users
with explicit checks for the size, and make them use the new get APIntVal()
method.
So let the lexer produce an AsmLexer::Integer as before for numbers which
are small enough — which appears to cover what was previously a nasty
special case handling of numbers which don't fit in int64_t but *do* fit
in uint64_t.
Where the number is too large even for that, produce an AsmLexer::BigNum
instead. We do nothing with these except complain about them for now,
but that will be changed shortly...
Based on a patch from PaX Team <pageexec@freemail.hu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200613 91177308-0d34-0410-b5e6-96231b3b80d8
LCSSA when we promote to SSA registers inside of LICM.
Currently, this is actually necessary. The promotion logic in LICM uses
SSAUpdater which doesn't understand how to place LCSSA PHI nodes.
Teaching it to do so would be a very significant undertaking. It may be
worthwhile and I've left a FIXME about this in the code as well as
starting a thread on llvmdev to try to figure out the right long-term
solution.
For now, the PR needs to be fixed. Short of using the promition
SSAUpdater to place both the LCSSA PHI nodes and the promoted PHI nodes,
I don't see a cleaner or cheaper way of achieving this. Fortunately,
LCSSA is relatively lazy and sparse -- it should only update
instructions which need it. We can also skip the recursive variant when
we don't promote to SSA values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200612 91177308-0d34-0410-b5e6-96231b3b80d8
cost so that they don't impact the vector bonus. Fundamentally, counting
unsimplified instructions is just *wrong*; it will continue to introduce
instability as things which do not generate code bizarrely impact
inlining. For example, sufficiently nested inlined functions could turn
off the vector bonus with lifetime markers just like the debug
intrinsics do. =/
This is a short-term tactical fix. Long term, I think we need to remove
the vector bonus entirely. That's a separate patch and discussion
though.
The patch to fix this provided by Dario Domizioli. I've added some
comments about the planned direction and used a heavily pruned form of
debug info intrinsics for the test case. While this debug info doesn't
work or "do" anything useful, it lets us easily test all manner of
interference easily, and I suspect this will not be the last time we
want to craft a pattern where debug info interferes with the inliner in
a problematic way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200609 91177308-0d34-0410-b5e6-96231b3b80d8
Per the GAS documentation, .fill should permit pattern widths that
aren't a power of two. While I was in the neighborhood, I added some
sanity checking. This change was motivated by a use of this construct
in the Linux Kernel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200606 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r200576. It broke 32-bit self-host builds by
vectorizing two calls to @llvm.bswap.i64, which we then fail to expand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200602 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the PrologueEpilogInserter and LocalStackSlotAllocation passes to
follow the extended stack layout rules for sspstrong and sspreq.
The sspstrong layout rules are:
1. Large arrays and structures containing large arrays (>= ssp-buffer-size)
are closest to the stack protector.
2. Small arrays and structures containing small arrays (< ssp-buffer-size) are
2nd closest to the protector.
3. Variables that have had their address taken are 3rd closest to the
protector.
Differential Revision: http://llvm-reviews.chandlerc.com/D2546
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200601 91177308-0d34-0410-b5e6-96231b3b80d8
Calls with inalloca are lowered by skipping all stores for arguments
passed in memory and the initial stack adjustment to allocate argument
memory.
Now the frontend is responsible for the memory layout, and the backend
doesn't have to do any work. As a result these changes are pretty
minimal.
Reviewers: echristo
Differential Revision: http://llvm-reviews.chandlerc.com/D2637
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200596 91177308-0d34-0410-b5e6-96231b3b80d8
This library will be used by clang-query. I can imagine LLDB becoming another
client of this library, so I think LLVM is a sensible place for it to live.
It wraps libedit, and adds tab completion support.
The code is loosely based on the line editor bits in LLDB, with a few
improvements:
- Polymorphism for retrieving the list of tab completions, based on
the concept pattern from the new pass manager.
- Tab completion doesn't corrupt terminal output if the input covers
multiple lines. Unfortunately this can only be done in a truly horrible
way, as far as I can tell. But since the alternative is to implement our
own line editor (which I don't think LLVM should be in the business of
doing, at least for now) I think it may be acceptable.
- Includes a fallback for the case where the user doesn't have libedit
installed.
Note that this uses C stdio, mainly because libedit also uses C stdio.
Differential Revision: http://llvm-reviews.chandlerc.com/D2200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200595 91177308-0d34-0410-b5e6-96231b3b80d8
Allocas marked inalloca are never static, but we were trying to put them
into the static alloca map if they were in the entry block. Also add an
assertion in x86 fastisel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200593 91177308-0d34-0410-b5e6-96231b3b80d8
To remove this one simply move the end of file logic from the asm printer to
the target mc streamer.
This removes the last call to hasRawTextSupport from lib/Target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200590 91177308-0d34-0410-b5e6-96231b3b80d8
There is nothing wrong with printing the disassembly section when printing
text. An hypothetical assembler would then produce a .o just like our
direct object emission produces.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200583 91177308-0d34-0410-b5e6-96231b3b80d8
It looks like these pseudos were only used for pattern matching. Def pats are
the appropriate way to do that. As a bonus, these intrinsics will now have
memory operands folded properly, and better FMA3 variants selected where
appropriate (see r199933).
<rdar://problem/15611947>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200577 91177308-0d34-0410-b5e6-96231b3b80d8
transform accordingly. Based on similar code from Loop vectorization.
Subsequent commits will include vectorization of function calls to
vector intrinsics and form function calls to vector library calls.
Patch by Raul Silvera! (Much delayed due to my not running dcommit)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200576 91177308-0d34-0410-b5e6-96231b3b80d8
algorithm. Sink the 'A' + Attribute hash into each form so we don't
have to check valid forms before deciding whether or not we're going
to hash which will let the default be to return without doing anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200571 91177308-0d34-0410-b5e6-96231b3b80d8
This ensures DWARF consumers don't confuse these references for
definitions. I'd argue it might be nice to improve debuggers so we don't
need this, but it's just one field in an abbreviation anyway - so it
doesn't seem worth the fight.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200569 91177308-0d34-0410-b5e6-96231b3b80d8
If we have a callee cleanup convention, the callee is going to pop the
arguments off the stack, not push them on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200566 91177308-0d34-0410-b5e6-96231b3b80d8
MSVC always places the 'this' parameter for a method first. The
implicit 'sret' pointer for methods always comes second. We already
implement this for __thiscall by putting sret parameters on the stack,
but __cdecl methods require putting both parameters on the stack in
opposite order.
Using a special calling convention allows frontends to keep the sret
parameter first, which avoids breaking lots of assumptions in LLVM and
Clang.
Fixes PR15768 with the corresponding change in Clang.
Reviewers: ributzka, majnemer
Differential Revision: http://llvm-reviews.chandlerc.com/D2663
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200561 91177308-0d34-0410-b5e6-96231b3b80d8
loop vectorizer to not do so when runtime pointer checks are needed and
share code with the new (not yet enabled) load/store saturation runtime
unrolling. Also ensure that we only consider the runtime checks when the
loop hasn't already been vectorized. If it has, the runtime check cost
has already been paid.
I've fleshed out a test case to cover the scalar unrolling as well as
the vector unrolling and comment clearly why we are or aren't following
the pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200530 91177308-0d34-0410-b5e6-96231b3b80d8
The entry block of a function starts with all the static allocas. The change
in r195513 splits the block before those allocas, which has the effect of
turning them into dynamic allocas. That breaks all sorts of things. Change to
split after the initial allocas, and also add a comment explaining why the
block is split.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200515 91177308-0d34-0410-b5e6-96231b3b80d8
