if (HasAVX)
X86SSELevel = NoMMXSSE;
This is so patterns that are predicated on hasSSE3, etc. would not be selected when avx is available. Instead, the AVX variant is selected.
However, this breaks instructions which do not have AVX variants.
The right way to fix this is for the SSE but not-AVX patterns to predicate on something like hasSSE3() && !hasAVX().
Then we can take out the hack in X86Subtarget.cpp. Patterns which do not have AVX variants do not need to change.
However, we need to audit all the patterns before we make the change. This patch is workaround that fixes one specific case,
the prefetch instructions. rdar://10538297
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@146163 91177308-0d34-0410-b5e6-96231b3b80d8
Like V_SET0, these instructions are expanded by ExpandPostRA to xorps /
vxorps so they can participate in execution domain swizzling.
This also makes the AVX variants redundant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145440 91177308-0d34-0410-b5e6-96231b3b80d8
not depend on In32BitMode. Use the sysexitq mnemonic for the version with the
REX.W prefix and only allow it only In64BitMode. rdar://9738584
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143112 91177308-0d34-0410-b5e6-96231b3b80d8
TableGen infers unmodeled side effects on instructions without a
pattern. Fix some instruction definitions where that was overlooked.
Also raise an error if a rematerializable instruction has unmodeled side
effects. That doen't make any sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@141929 91177308-0d34-0410-b5e6-96231b3b80d8
instructions are more aligned than the CPU requires, and adds some additional
directives, to follow in future patches. Patch by David Meyer!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139125 91177308-0d34-0410-b5e6-96231b3b80d8
from DYNAMIC_STACKALLOC.
Two new pseudo instructions (SEG_ALLOCA_32 and SEG_ALLOCA_64) which
will match X86SegAlloca (based on word size) are also added. They
will be custom emitted to inject the actual stack handling code.
Patch by Sanjoy Das.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138814 91177308-0d34-0410-b5e6-96231b3b80d8
llvm-mc gives an "invalid operand" error for instructions that take an unsigned
immediate which have the high bit set such as:
pblendw $0xc5, %xmm2, %xmm1
llvm-mc treats all x86 immediates as signed values and range checks them.
A small number of x86 instructions use the imm8 field as a set of bits.
This change only changes those instructions and where the high bit is not
ignored. The others remain unchanged.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@136287 91177308-0d34-0410-b5e6-96231b3b80d8
- Each target asm parser now creates its own MCSubtatgetInfo (if needed).
- Changed AssemblerPredicate to take subtarget features which tablegen uses
to generate asm matcher subtarget feature queries. e.g.
"ModeThumb,FeatureThumb2" is translated to
"(Bits & ModeThumb) != 0 && (Bits & FeatureThumb2) != 0".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134678 91177308-0d34-0410-b5e6-96231b3b80d8
floating-point comparison, generate a mask of 0s or 1s, and generally
DTRT with NaNs. Only profitable when the user wants a materialized 0
or 1 at runtime. rdar://problem/5993888
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@132404 91177308-0d34-0410-b5e6-96231b3b80d8
llvm is built with unsigned chars where an immediate such as 0xff would be zero
extended to 64-bits, turning "cmp $0xff,%eax" into
"cmp $0xffffffffffffffff,%eax".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129845 91177308-0d34-0410-b5e6-96231b3b80d8
the generated FastISel. X86 doesn't need to generate code to match ADD16ri8
since ADD16ri will do just fine. This is a small codesize win in the generated
instruction selector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129692 91177308-0d34-0410-b5e6-96231b3b80d8
simplifying them and exposing more information to tblgen. It would be nice
if other target authors adopted this as well, particularly arm since it has fastisel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129676 91177308-0d34-0410-b5e6-96231b3b80d8
kind of predicate: one that is specific to imm nodes. The predicate function
specified here just checks an int64_t directly instead of messing around with
SDNode's. The virtue of this is that it means that fastisel and other things
can reason about these predicates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129675 91177308-0d34-0410-b5e6-96231b3b80d8
structure and fix some fixmes. We now have a TreePredicateFn class
that handles all of the decoding of these things. This is an internal
cleanup that has no impact on the code generated by tblgen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@129670 91177308-0d34-0410-b5e6-96231b3b80d8
their carry depenedencies with MVT::Flag operands) and use clean and beautiful
EFLAGS dependences instead.
We do this by changing the modelling of SBB/ADC to have EFLAGS input and outputs
(which is what requires the previous scheduler change) and change X86 ISelLowering
to custom lower ADDC and friends down to X86ISD::ADD/ADC/SUB/SBB nodes.
With the previous series of changes, this causes no changes in the testsuite, woo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@122213 91177308-0d34-0410-b5e6-96231b3b80d8
the output to the correct register. Fixes a hidden problem uncovered
by the last patch where we'd try to DAG combine our MVT::Other node
oddly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121358 91177308-0d34-0410-b5e6-96231b3b80d8
backend that they were all implemented except umul. This one fell back
to the default implementation that did a hi/lo multiply and compared the
top. Fix this to check the overflow flag that the 'mul' instruction
sets, so we can avoid an explicit test. Now we compile:
void *func(long count) {
return new int[count];
}
into:
__Z4funcl: ## @_Z4funcl
movl $4, %ecx ## encoding: [0xb9,0x04,0x00,0x00,0x00]
movq %rdi, %rax ## encoding: [0x48,0x89,0xf8]
mulq %rcx ## encoding: [0x48,0xf7,0xe1]
seto %cl ## encoding: [0x0f,0x90,0xc1]
testb %cl, %cl ## encoding: [0x84,0xc9]
movq $-1, %rdi ## encoding: [0x48,0xc7,0xc7,0xff,0xff,0xff,0xff]
cmoveq %rax, %rdi ## encoding: [0x48,0x0f,0x44,0xf8]
jmp __Znam ## TAILCALL
instead of:
__Z4funcl: ## @_Z4funcl
movl $4, %ecx ## encoding: [0xb9,0x04,0x00,0x00,0x00]
movq %rdi, %rax ## encoding: [0x48,0x89,0xf8]
mulq %rcx ## encoding: [0x48,0xf7,0xe1]
testq %rdx, %rdx ## encoding: [0x48,0x85,0xd2]
movq $-1, %rdi ## encoding: [0x48,0xc7,0xc7,0xff,0xff,0xff,0xff]
cmoveq %rax, %rdi ## encoding: [0x48,0x0f,0x44,0xf8]
jmp __Znam ## TAILCALL
Other than the silly seto+test, this is using the o bit directly, so it's going in the right
direction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120935 91177308-0d34-0410-b5e6-96231b3b80d8
different forms of this instruction (movw/movl/movq) which we reported
as being ambiguous. Since they all do the same thing, gas just picks the
one with the shortest encoding. Follow its lead here.
This implements rdar://8208615
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118362 91177308-0d34-0410-b5e6-96231b3b80d8
exposed:
GAS doesn't accept "fcomip %st(1)", it requires "fcomip %st(1), %st(0)"
even though st(0) is implicit in all other fp stack instructions.
Fortunately, there is an alias for fcomip named "fcompi" and gas does
accept the default argument for the alias (boggle!).
As such, switch the canonical form of this instruction to "pi" instead
of "ip". This makes the code generator and disassembler generate pi,
avoiding the gas bug.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118356 91177308-0d34-0410-b5e6-96231b3b80d8
shift-by-1 instructions, where the asmstring doesn't contain
the implicit 1. It turns out that a bunch of these rotate
instructions were completely broken because they used 1
instead of $1.
This fixes assembly mismatches on "rclb $1, %bl" and friends,
where we used to generate the 3 byte form, we now generate the
proper 2-byte form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118355 91177308-0d34-0410-b5e6-96231b3b80d8
fixed physical registers. Start moving fp comparison
aliases to the .td file (which default to using %st1 if
nothing is specified).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118352 91177308-0d34-0410-b5e6-96231b3b80d8
result instruction operand numbering matched the result pattern.
Fixing this allows us to move the xchg/test aliases to the .td file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118334 91177308-0d34-0410-b5e6-96231b3b80d8
operand list instead of the operand list redundantly declared on the alias
or instruction.
With this change, we finally remove the ins/outs list on the alias. Before:
def : InstAlias<(outs GR16:$dst), (ins GR8 :$src),
"movsx $src, $dst",
(MOVSX16rr8W GR16:$dst, GR8:$src)>;
After:
def : InstAlias<"movsx $src, $dst",
(MOVSX16rr8W GR16:$dst, GR8:$src)>;
This also makes the alias mechanism more general and powerful, which will
be exploited in subsequent patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118329 91177308-0d34-0410-b5e6-96231b3b80d8
aliases installed and working. They now work when the
matched pattern and the result instruction have exactly
the same operand list.
This is now enough for us to define proper aliases for
movzx and movsx, implementing rdar://8017633 and PR7459.
Note that we do not accept instructions like:
movzx 0(%rsp), %rsi
GAS accepts this instruction, but it doesn't make any
sense because we don't know the size of the memory
operand. It could be 8/16/32 bits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117901 91177308-0d34-0410-b5e6-96231b3b80d8
"In32BitMode" and "In64BitMode" into tblgen, allow any
predicate that inherits from AssemblerPredicate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117831 91177308-0d34-0410-b5e6-96231b3b80d8
directives, allowing things like this:
def : MnemonicAlias<"pop", "popl">, Requires<[In32BitMode]>;
def : MnemonicAlias<"pop", "popq">, Requires<[In64BitMode]>;
Move the rest of the X86 MnemonicAliases over to the .td file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117830 91177308-0d34-0410-b5e6-96231b3b80d8
be more complete. These are only expected to be used by llvm-mc with assembly
source so there is no pattern, [], in the .td files. Most are being added to
X86InstrInfo.td as Chris suggested and only comments about register uses are
added. Suggestions welcome on the .td changes as I'm not sure on every detail
of the x86 records. More missing instructions will be coming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116716 91177308-0d34-0410-b5e6-96231b3b80d8
The reg-reg copies were no longer being generated since copyPhysReg copies
physical registers only.
The loads and stores are not necessary - The TC constraint is imposed by the
TAILJMP and TCRETURN instructions, there should be no need for constrained loads
and stores.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116314 91177308-0d34-0410-b5e6-96231b3b80d8
"Reimplement (part of) the or -> add optimization. Matching 'or' into 'add'"
With a critical fix: the add pseudos clobber EFLAGS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116039 91177308-0d34-0410-b5e6-96231b3b80d8
is general goodness because it allows ORs to be converted to LEA to avoid
inserting copies. However, this is bad because it makes the generated .s
file less obvious and gives valgrind heartburn (tons of false positives in
bitfield code).
While the general fix should be in valgrind, we can at least try to avoid
emitting ADD instructions that *don't* get promoted to LEA. This is more
work because it requires introducing pseudo instructions to represents
"add that knows the bits are disjoint", but hey, people really love valgrind.
This fixes this testcase:
https://bugs.kde.org/show_bug.cgi?id=242137#c20
the add r/i cases are coming next.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116007 91177308-0d34-0410-b5e6-96231b3b80d8
control flow stuff out to X86InstrControl.td. Move
some compiler pseudo instructions and Pat<> patterns
out to X86InstrCompiler.td
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115596 91177308-0d34-0410-b5e6-96231b3b80d8
else in X86), and add support for pavgusb. This is apparently the
only instruction (other than movsx) that is preventing ffmpeg from building
with clang.
If someone else is interested in banging out the rest of the 3DNow!
instructions, it should be quite easy now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115466 91177308-0d34-0410-b5e6-96231b3b80d8
x86-32: 32-bit calls were named "call" not "calll". 64-bit calls were correctly
named "callq", so this only impacted x86-32.
This fixes rdar://8456370 - llvm-mc rejects 'calll'
This also exposes that mingw/64 is generating a 32-bit call instead of a 64-bit call,
I will file a bugzilla.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114534 91177308-0d34-0410-b5e6-96231b3b80d8
by having X86DAGToDAGISel::SelectAddr get passed in the parent node
of the operand match (the load/store/atomic op) and having it get
the address space from that, instead of having special FS/GS addr
mode operations that require duplicating the entire instruction set
to support.
This makes FS and GS relative accesses *far* more predictable and
work much better. It also simplifies the X86 backend a bit, more
to come.
There is still a pending issue with nodes like ISD::PREFETCH and
X86ISD::FLD, which really should be MemSDNode's but aren't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@114491 91177308-0d34-0410-b5e6-96231b3b80d8
add sldt GR32, which isn't documented in the intel manual
but which gas accepts. Part of rdar://8418316
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@113938 91177308-0d34-0410-b5e6-96231b3b80d8
Mark _alloca call as clobberring EFLAGS, otherwise some DCE might remove
other flags-clobberring stuff (e.g. cmp instructions) occuring after
_alloca call.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112034 91177308-0d34-0410-b5e6-96231b3b80d8
we are using AVX and no AVX version of the desired intruction is present,
this is better for incremental dev (without fallbacks it's easier to spot
what's missing). Not sure this is the best hack thought (we can also disable
all HasSSE* predicates by dinamically marking them 'false' if AVX is present)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109434 91177308-0d34-0410-b5e6-96231b3b80d8
for lowering without sse2. Add a couple of new testcases.
Fixes a few libgomp tests and latent bugs. Remove a few todos.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@109078 91177308-0d34-0410-b5e6-96231b3b80d8
instruction, we only want to allow the one for the current subtarget.
- This also fixes suffix matching for jmp instructions, because it eliminates
the ambiguity between 'jmpl' and 'jmpq'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@108746 91177308-0d34-0410-b5e6-96231b3b80d8
notes:
- The instructions are being added with dummy placeholder patterns using some 256
specifiers, this is not meant to work now, but since there are some multiclasses
generic enough to accept them, when we go for codegen, the stuff will be already
there.
- Add VEX encoding bits to support YMM
- Add MOVUPS and MOVAPS in the first round
- Use "Y" as suffix for those Instructions: MOVUPSYrr, ...
- All AVX instructions in X86InstrSSE.td will move soon to a new X86InstrAVX
file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107996 91177308-0d34-0410-b5e6-96231b3b80d8
jumps where possible and turning the TAILCALL marker in the instruction
asm string into a proper comment.
This eliminates a FIXME and is on the path to finishing:
rdar://7639610 - eliminate encoding and asm info for TAILJMPd TAILJMPr TAILJMPn, etc.
However, I can't eliminate the encodings for these instructions because the JIT
still exists and has its own copy of the encoder, sigh.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107946 91177308-0d34-0410-b5e6-96231b3b80d8
like all other instructions, even though a segment is not
allowed. This resolves a bunch of gross hacks in the
encoder and makes LEA more consistent with the rest of the
instruction set.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@107934 91177308-0d34-0410-b5e6-96231b3b80d8
and operand renaming to help.
The giant turn the constraints on and selectively turn it off
should probably be inverted at some point since it's just largely
50/50.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@106367 91177308-0d34-0410-b5e6-96231b3b80d8
addw $0xFFFF, %ax
should match the same as
addw $-1, %ax
but we used to match it to the longer encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104453 91177308-0d34-0410-b5e6-96231b3b80d8
prefix byte problem as in r104062.
- As a total hack to keep the TAILCALL markers in the output, which some tests depend on, this invents a new TAILJMP_1 instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@104120 91177308-0d34-0410-b5e6-96231b3b80d8
lower them to the correct x86-64 instructions since we
don't have a clean way to handle this in td files yet.
rdar://7947184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103668 91177308-0d34-0410-b5e6-96231b3b80d8
and %rcr_, leaving just %cr_ which is what people expect.
Updated the disassembler to support this unified register set.
Added a testcase to verify that the registers continue to be
decoded correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103196 91177308-0d34-0410-b5e6-96231b3b80d8
caused the a pushl instruction to be incorrectly encoding using only two bytes
of immediate, causing the following 2 instruction bytes to be part of the 32-bit
immediate value. Also fixed the one byte form of push to be used when the
immediate would fit in a signed extended byte. Lastly changed the names to not
include the 32 of PUSH32 since they actually push the size of the stack pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102951 91177308-0d34-0410-b5e6-96231b3b80d8