llvm-ld is no longer useful and causes confusion and so it is being removed.
* Does not work very well on Windows because it must call a gcc like driver to
assemble and link.
* Has lots of hard coded paths which are wrong on many systems.
* Does not understand most of ld's options.
* Can be partially replaced by llvm-link | opt | {llc | as, llc -filetype=obj} |
ld, or fully replaced by Clang.
I know of no production use of llvm-ld, and hacking use should be
replaced by Clang's driver.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@155147 91177308-0d34-0410-b5e6-96231b3b80d8
Clang builds. The detection logic for compilers that support the warning
isn't working. Rafael is going to investigate it, but didn't want people
to have to wade through build spam until then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151649 91177308-0d34-0410-b5e6-96231b3b80d8
that just uses the new toolchain probing logic. This fixes linking with -m32 on
64 bit systems (the /32 dir was not being added to the search).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149651 91177308-0d34-0410-b5e6-96231b3b80d8
Get back getHostTriple.
For JIT compilation, use the host triple instead of the default
target: this fixes some JIT testcases that used to fail when the
compiler has been configured as a cross compiler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147542 91177308-0d34-0410-b5e6-96231b3b80d8
- This will require you to manually reconfigure the projects/sample project (by running projects/config/sample/config.status --recheck) if you haven't updated/built since the 1st part of this commit went in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@143148 91177308-0d34-0410-b5e6-96231b3b80d8
- This currently just moves over all of the behavior from LLVM. Eventually all of the configure checks that are directly needed by the LLVM build setup should probably go away, and the project should manage their own configuration checks if necessary.
- This is the 1st half of this work, the actual Makefile.common hasn't moved over yet. I've tried to stage this in such a way that incremental builds will properly reconfigure for most active developers (the Makefiles don't handle reconfiguring in a perfectly reliable way, and I haven't found an easy way to make them do so).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@142456 91177308-0d34-0410-b5e6-96231b3b80d8
autoconf directory, but these paths need to be relative to the main
source directory. Patch originally by Dan Gohman, r67655.
Also, cause configure.ac to find absolute paths to LLVM source and
object trees. Together, fixes PR1220.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121645 91177308-0d34-0410-b5e6-96231b3b80d8
that all the Makefiles changed mode.
Fix this by tellint install-sh to chmod
only to 0644, these are not executable files after all!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80371 91177308-0d34-0410-b5e6-96231b3b80d8
We will keep the old projects/llvm-test working for existing installs.
The changes to configure are made manually, since I lack autoconf-2.6. Someone
might want to run AutoGen.sh to see if that changes anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52675 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes the SetCC instructions and replaces them with the ICmp
and FCmp instructions. The SetCondInst instruction has been removed and
been replaced with ICmpInst and FCmpInst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32751 91177308-0d34-0410-b5e6-96231b3b80d8
adding a temporary wrapper around the ostream to make it friendly to
functions expecting an LLVM stream. This should be fixed in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31990 91177308-0d34-0410-b5e6-96231b3b80d8
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31931 91177308-0d34-0410-b5e6-96231b3b80d8
This patch converts the old SHR instruction into two instructions,
AShr (Arithmetic) and LShr (Logical). The Shr instructions now are not
dependent on the sign of their operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31542 91177308-0d34-0410-b5e6-96231b3b80d8
Turn on -Wunused and -Wno-unused-parameter. Clean up most of the resulting
fall out by removing unused variables. Remaining warnings have to do with
unused functions (I didn't want to delete code without review) and unused
variables in generated code. Maintainers should clean up the remaining
issues when they see them. All changes pass DejaGnu tests and Olden.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31380 91177308-0d34-0410-b5e6-96231b3b80d8
Make necessary changes to support DIV -> [SUF]Div. This changes llvm to
have three division instructions: signed, unsigned, floating point. The
bytecode and assembler are bacwards compatible, however.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31195 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements the first increment for the Signless Types feature.
All changes pertain to removing the ConstantSInt and ConstantUInt classes
in favor of just using ConstantInt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31063 91177308-0d34-0410-b5e6-96231b3b80d8
1. Change the usage of LOADABLE_MODULE so that it implies all the things
necessary to make a loadable module. This reduces the user's burdern to
get a loadable module correctly built.
2. Document the usage of LOADABLE_MODULE in the MakefileGuide
3. Adjust the makefile for lib/Transforms/Hello to use the new specification
for building loadable modules
4. Adjust the sample project to not attempt to build a shared library for
its little library. This was just wasteful and not instructive at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29551 91177308-0d34-0410-b5e6-96231b3b80d8
Turn -pedantic and -Wno-long-long compile flags on by default. In a few
places, avoid the warnings by removing these options in the local makefile.
One notable exception: lib/Target/CBackend/Writer.cpp. These warnings are
left on as a reminder to developers to clean them up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28614 91177308-0d34-0410-b5e6-96231b3b80d8
BCWriter, and bzip2 libraries. Adjust the various makefiles to accommodate
these changes. This was done to speed up link times.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28610 91177308-0d34-0410-b5e6-96231b3b80d8
directories if it can't find them. Then, replace those values into the
configure.ac script and pass them to the LLVM_CONFIG_PROJECT so that the
values become the default for llvm_src and llvm_obj variables. In this way
the user is required to input this exactly once, and the scripts take it
from there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27798 91177308-0d34-0410-b5e6-96231b3b80d8
These changes modify the makefiles so that the output of flex and bison are
placed in the SRC directory, not the OBJ directory. It is intended that they
be checked in as any other LLVM source so that platforms without convenient
access to flex/bison can be compiled. From now on, if you change a .y or
.l file you *must* also commit the generated .cpp and .h files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@23115 91177308-0d34-0410-b5e6-96231b3b80d8
