All our patterns use MVT::i64, but the ISelLowering nodes were inconsistent in
their choice.
No functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223551 91177308-0d34-0410-b5e6-96231b3b80d8
Fix the poor codegen seen in PR21710 ( http://llvm.org/bugs/show_bug.cgi?id=21710 ).
Before we crack 32-byte build vectors into smaller chunks (and then subsequently
glue them back together), we should look for the easy case where we can just load
all elements in a single op.
An example of the codegen change is:
From:
vmovss 16(%rdi), %xmm1
vmovups (%rdi), %xmm0
vinsertps $16, 20(%rdi), %xmm1, %xmm1
vinsertps $32, 24(%rdi), %xmm1, %xmm1
vinsertps $48, 28(%rdi), %xmm1, %xmm1
vinsertf128 $1, %xmm1, %ymm0, %ymm0
retq
To:
vmovups (%rdi), %ymm0
retq
Differential Revision: http://reviews.llvm.org/D6536
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223518 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Follow up to [x32] "Use ebp/esp as frame and stack pointer":
http://reviews.llvm.org/D4617
In that earlier patch, NaCl64 was made to always use rbp.
That's needed for most cases because rbp should hold a full
64-bit address within the NaCl sandbox so that load/stores
off of rbp don't require sandbox adjustment (zeroing the top
32-bits, then filling those by adding r15).
However, llvm.frameaddress returns a pointer and pointers
are 32-bit for NaCl64. In this case, use ebp instead, which
will make the register copy type check. A similar mechanism
may be needed for llvm.eh.return, but is not added in this change.
Test Plan: test/CodeGen/X86/frameaddr.ll
Reviewers: dschuff, nadav
Subscribers: jfb, llvm-commits
Differential Revision: http://reviews.llvm.org/D6514
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223510 91177308-0d34-0410-b5e6-96231b3b80d8
SSE2/AVX non-constant packed shift instructions only use the lower 64-bit of
the shift count.
This patch teaches function 'getTargetVShiftNode' how to deal with shifts
where the shift count node is of type MVT::i64.
Before this patch, function 'getTargetVShiftNode' only knew how to deal with
shift count nodes of type MVT::i32. This forced the backend to wrongly
truncate the shift count to MVT::i32, and then zero-extend it back to MVT::i64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223505 91177308-0d34-0410-b5e6-96231b3b80d8
When a loop gets bundled up, its outgoing edges are quite large, and can
just barely overflow 64-bits. If one successor has multiple incoming
edges -- and that successor is getting all the incoming mass --
combining just its edges can overflow. Handle that by saturating rather
than asserting.
This fixes PR21622.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223500 91177308-0d34-0410-b5e6-96231b3b80d8
It is only build if LLVM_BINUTILS_INCDIR is explicitly given, so there is
no point in having extra restrictions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223481 91177308-0d34-0410-b5e6-96231b3b80d8
Required some APInt massaging to get proper empty/tombstone values. Apart
from making the code a bit simpler this also reduces the bucket size of
the ConstantInt map from 32 to 24 bytes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223478 91177308-0d34-0410-b5e6-96231b3b80d8
No functional changes. Got myself bitten in r223113 when adding support for
modified immediate syntax (regressions reported by joerg@britannica.bec.de,
fixes in r223366 and r223381). Our assembler tests did not cover serveral
different syntax variants. This patch expands the test coverage to check for
the following cases:
1. Modified immediate operands may be expressed with expressions, as in #(4 * 2)
instead of #8.
2. Modified immediate operands may be _optionally_ prefixed by a '#' symbol or a
'$' symbol.
3. Certain instructions (e.g. ADD) support single input register variants;
[ADD r0, #mod_imm] is same as [ADD r0, r0, #mod_imm].
4. Certain instructions have aliases which convert plain immediates to modified
immediates. For an example, [ADD r0, -10] is not valid because -10 (in two's
complement) cannot be encoded as a modified immediate, but ARMInstrInfo.td
defines an alias which can transform this into a [SUB r0, 10].
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223475 91177308-0d34-0410-b5e6-96231b3b80d8
Do not realign origin address if the corresponding application
address is at least 4-byte-aligned.
Saves 2.5% code size in track-origins mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223464 91177308-0d34-0410-b5e6-96231b3b80d8
When lowering a vector shift node, the backend checks if the shift count is a
shuffle with a splat mask. If so, then it introduces an extra dag node to
extract the splat value from the shuffle. The splat value is then used
to generate a shift count of a target specific shift.
However, if we know that the shift count is a splat shuffle, we can use the
splat index 'I' to extract the I-th element from the first shuffle operand.
The advantage is that the splat shuffle may become dead since we no longer
use it.
Example:
;;
define <4 x i32> @example(<4 x i32> %a, <4 x i32> %b) {
%c = shufflevector <4 x i32> %b, <4 x i32> undef, <4 x i32> zeroinitializer
%shl = shl <4 x i32> %a, %c
ret <4 x i32> %shl
}
;;
Before this patch, llc generated the following code (-mattr=+avx):
vpshufd $0, %xmm1, %xmm1 # xmm1 = xmm1[0,0,0,0]
vpxor %xmm2, %xmm2
vpblendw $3, %xmm1, %xmm2, %xmm1 # xmm1 = xmm1[0,1],xmm2[2,3,4,5,6,7]
vpslld %xmm1, %xmm0, %xmm0
retq
With this patch, the redundant splat operation is removed from the code.
vpxor %xmm2, %xmm2
vpblendw $3, %xmm1, %xmm2, %xmm1 # xmm1 = xmm1[0,1],xmm2[2,3,4,5,6,7]
vpslld %xmm1, %xmm0, %xmm0
retq
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223461 91177308-0d34-0410-b5e6-96231b3b80d8
The test file test/CodeGen/ARM/build-attributes.ll was missing several
floating-point build attribute tests. The intention of this commit is that for
each CPU / architecture currently tested, there are now tests that make sure
the following attributes are sufficiently checked,
* Tag_ABI_FP_rounding
* Tag_ABI_FP_denormal
* Tag_ABI_FP_exceptions
* Tag_ABI_FP_user_exceptions
* Tag_ABI_FP_number_model
Also in this commit, the -unsafe-fp-math flag has been augmented with the full
suite of flags Clang sends to LLVM when you pass -ffast-math to Clang. That is,
`-unsafe-fp-math' has been changed to `-enable-unsafe-fp-math -disable-fp-elim
-enable-no-infs-fp-math -enable-no-nans-fp-math -fp-contract=fast'
Change-Id: I35d766076bcbbf09021021c0a534bf8bf9a32dfc
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223454 91177308-0d34-0410-b5e6-96231b3b80d8
Reverting this because, while it fixes the problem in the reduced test case, it
does not fix the problem in the full test case from the bug report.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223442 91177308-0d34-0410-b5e6-96231b3b80d8
The scheduling dependency graph is built bottom-up within each scheduling
region, and ScheduleDAGInstrs::addPhysRegDeps is called to add output/anti
dependencies, based on physical registers, to the SUs for instructions
based on those that come before them.
In the test case, we start before post-RA scheduling with a block that looks
like this:
...
INLINEASM <...
andc $0,$0,$2
stdcx. $0,0,$3
bne- 1b
> [sideeffect] [mayload] [maystore] [attdialect], $0:[regdef-ec:G8RC], %X6<earlyclobber,def,dead>, $1:[mem], %X3<kill>, $2:[reguse:G8RC], %X5<kill>, $3:[reguse:G8RC], %X3, $4:[mem], %X3, $5:[clobber], %CC<earlyclobber,imp-def,dead>, <<badref>>
...
%X4<def,dead> = ANDIo8 %X4<kill>, 1, %CR0<imp-def,dead>, %CR0GT<imp-def>
...
%R29<def> = ISEL %R3<undef>, %R4<kill>, %CR0GT<kill>
where it is relevant that %CC is an alias to %CR0, and that %CR0GT is a
subregister of %CR0. However, for post-RA scheduling, no dependency was added
to prevent the INLINEASM from being scheduled in between the ANDIo8 and the
ISEL (which communicate via the %CR0GT register).
In ScheduleDAGInstrs::addPhysRegDeps, when called for the %CC operand, we'd
iterate over all of its aliases (which include %CC itself and also %CR0), and
look for previously-encountered defs of those registers. We'd find the ANDIo8,
but decide not to add a dependency between the INLINEASM and the ANDIo8 because
both the INLINEASM's def of %CC is dead, and also the ANDIo8 def of %CR0 is
dead. This ignores, however, that ANDIo8 has a non-dead def of %CR0GT, a
subregister of %CR0, and thus a dependency still must exist.
To fix this problem, when calling registerDefIsDead on the SU with the def, we
also check all subregisters for possible non-dead defs, and add the dependency
if any are found.
Fixes PR21742.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223440 91177308-0d34-0410-b5e6-96231b3b80d8
It relies on undefined behaviour, since `StringMapEntry<>` is not
a standard layout type. There are no users anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223439 91177308-0d34-0410-b5e6-96231b3b80d8
no DWARF register number mapping, or if the register was a virtual
register that was never materialized. Previously, we would just emit a
bogus location, after this patch we don't emit a location at all by
doing an early exit.
After my bugfix in r223401 today, this doesn't actually happen on any
target that I tested this with, but it's still preferable to make the
possibility of a failure explicit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223428 91177308-0d34-0410-b5e6-96231b3b80d8
